Barad-dûr

About Barad-dûr

Barad-dûr (10333-1) is a LEGO Lord of the Rings set released in 2024, currently averaging $394.96 used on BrickLink. It comes with 11 minifigures worth a combined $193.91. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 709 pieces.

Part-out value

The minifigures account for about 49% of the set's value ($193.91 out of $394.96). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Seller notes

• Sauron ($48.97) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
• 11 minifigures at $193.91 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
• 709 parts makes this a substantial set. If selling used, confirm completeness before listing — incomplete large sets sell at a steep discount. Use the parts list on this page to check.

Minifigures in Barad-dûr (11)

Skeleton - Standard Skull, Bent Arms Horizontal Grip

gen099$1.43

Frodo Baggins - Reddish Brown Jacket, Light Nougat Feet

lor131$8.39

Samwise Gamgee (Sam) - Dark Tan Jacket

lor132$8.17

Gollum - Round Eyes

lor133$8.20

Orc - Medium Nougat Head, Pearl Dark Gray Armor and Helmet

lor134$19.13

Orc - Olive Green Head, Pearl Dark Gray Armor with Dirt Splotches, Dark Brown Hair

lor135$17.26

Gothmog

lor136$22.82

Orc - Olive Green Head, Pearl Dark Gray Armor over Dark Tan Fur, Dark Brown Hair

lor137$17.42

Orc - Medium Nougat Head, Pearl Dark Gray Armor, Red Bandana

lor138$13.72

Sauron

lor139$48.97

Mouth of Sauron - Pearl Dark Gray Arms

lor140$28.41

Parts (709)

Minifigure, Weapon Sword, Uruk-hai

×5

Sticker Sheet for Set 10333 - (10108367/6484603)

Minifigure, Utensil Ring 1 x 1

×3

Barb / Claw / Horn / Tooth - Large

×14

Bar Holder with Clip

×11

Bar Holder with Clip

×8

Brick, Modified 1 x 2 with Studs on 1 Side

×10

Brick, Modified 1 x 2 with Studs on 1 Side

×12

Brick, Modified 1 x 2 with Studs on 1 Side

×9

Plate, Round 6 x 6 with Hole

Technic, Axle 1L with Pin 2L with Friction Ridges

×8

Wedge 3 x 4 x 2/3 Curved with Cutout

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×3

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×26

Slope, Curved 2 x 1 x 2/3

×48

Slope, Curved 2 x 1 x 2/3

×6

Slope, Curved 2 x 1 x 2/3

×8

Wedge 2 x 2 (Slope 45 Corner)

×2

Wedge 2 x 2 (Slope 45 Corner)

×23

Wedge 2 x 2 (Slope 45 Corner)

×6

Wedge 2 x 2 (Slope 45 Corner)

×2

Wedge 2 x 2 (Slope 45 Corner)

×34

Arch 1 x 3 x 3

×12

Arch 1 x 3 x 3

×10

Brick, Modified Facet 4 x 4

×6

Plate, Modified 1 x 2 with Tow Ball on Side

×2

Brick 1 x 1 x 3

×12

Brick 1 x 1 x 3

Brick 1 x 1 x 3

Tile 2 x 2 Corner

×2

Tile 2 x 2 Corner

Tile 2 x 2 Corner

×6

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

×14

Plate, Modified 1 x 1 with Tooth Vertical

×4

Plate, Modified 1 x 1 with Tooth Vertical

×5

Technic, Pin with Friction Ridges and Pin Hole

×4

Fence 1 x 4 x 2 Spindled with 4 Studs

×3

Plate, Modified 2 x 2 with Tow Ball and Hole

Technic, Axle 5L with Stop

Tile, Round 2 x 2 with Hole

×2

Tile, Round 2 x 2 with Hole

×4

Slope 45 2 x 1 Triple with Bottom Stud Holder

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×9

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Tile, Modified 1 x 1 with Open O Clip

×13

Tile, Modified 1 x 1 with Open O Clip

×3

Tile, Modified 1 x 1 with Open O Clip

×8

Arch 1 x 8 x 2 Raised

×2

Plate, Round 1 x 2 Half with 1 Stud (Jumper)

×2

Brick, Round 2 x 2 with Pin Holes

×2

Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard

Minifigure, Weapon Sword, Roman Gladius with Thick Crossguard

×2

Plate, Round Half 3 x 6 with 1 x 2 Cutout

Plate, Round Half 3 x 6 with 1 x 2 Cutout

×4

Tile, Round 2 x 2 with Open Stud

×5

Tile, Round 2 x 2 with Open Stud

×2

Tile, Round 2 x 2 with Open Stud

Plate, Modified 1 x 2 with Pin Hole on Bottom

Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports

×2

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×2

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×4

Tile, Round 1 x 1 with Bar and Small Pin Hole

×13

Tile, Round 1 x 1 with Bar and Small Pin Hole

×7

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×6

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×5

Wedge 4 x 4 Pointed

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×10

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×4

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×5

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×13

Brick 1 x 2 x 3

×12

Plate, Round Half 4 x 8

×2

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×2

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×2

Minifigure, Utensil Goblet

×2

Minifigure, Utensil Goblet

×2

Bar Holder with Handle

×2

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×4

Brick 2 x 2 Corner

Brick 2 x 2 Corner

Brick 2 x 2 Corner

×5

Brick 2 x 2 Corner

×2

Minifigure, Weapon Blade with Bars and 5 Spikes

×4

Tail 8 x 1 with Stepped Fin

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×44

Wedge, Plate 3 x 6 Cut Corners

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×21

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×5

Plate 2 x 2 Corner

×5

Slope, Curved 2 x 1 x 2/3 Inverted

×4

Wedge, Plate 2 x 2 Left

×7

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×4

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×4

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×29

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×12

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×23

Wedge, Plate 2 x 2 Right

×8

Slope, Curved 3 x 2

×62

Tile 1 x 4

×8

Tile 1 x 4

Tile 1 x 4

Tile 1 x 4

×2

Tile 1 x 4

×63

Technic, Axle 3L with Stop

Plate 2 x 12

Plate 2 x 12

×18

Plate 2 x 12

Plate 2 x 12

×3

Plate 2 x 12

Minifigure, Weapon Spear Tip with Fins

×3

Slope, Inverted 75 2 x 1 x 3

×3

Wedge, Plate 3 x 3 Cut Corner

×18

Brick 1 x 2 x 5

×13

Brick 1 x 2 x 5

×2

Brick 1 x 2 x 5

×2

Brick 2 x 6

×13

Brick 2 x 6

×3

Brick 2 x 6

×2

Brick 2 x 6

×16

Brick 2 x 6

×20

Brick 2 x 6

×4

Brick 2 x 6

×7

Brick, Modified Facet 3 x 3

×2

Brick, Modified Facet 3 x 3

×8

Container, Barrel 2 x 2 x 2

Container, Barrel 2 x 2 x 2

×2

Tile, Round 1 x 1 Quarter

×23

Tile, Round 1 x 1 Quarter

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Plate, Round 1 x 1 with Bar Handle

×8

Technic, Axle Connector 3L

×5

Brick, Modified 1 x 4 with Channel

×4

Wedge, Plate 2 x 2 Cut Corner

×18

Wedge, Plate 2 x 2 Cut Corner

×12

Wedge, Plate 2 x 2 Cut Corner

×4

Wedge, Plate 2 x 2 Cut Corner

×3

Tile 2 x 3

×4

Tile 2 x 3

Tile, Modified Facet 2 x 2

×6

Technic, Axle 1L with Tow Ball

Technic, Link 1 x 6 without Stoppers

×2

Technic, Pin with Short Friction Ridges

×6

Tile, Round Corner 2 x 2 Macaroni

×4

Tile, Round Corner 2 x 2 Macaroni

×2

Slope 45 2 x 1 with Cutout without Stud

×19

Slope 45 2 x 1 with Cutout without Stud

×4

Slope 45 2 x 1 with Cutout without Stud

Brick, Modified 1 x 2 with Grille / Fluted Profile

×172

Brick, Modified 1 x 2 with Grille / Fluted Profile

×9

Spider with Elongated Abdomen

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick 2 x 4

×5

Brick 2 x 4

×3

Brick 2 x 4

×26

Brick 2 x 4

×3

Brick 2 x 4

×4

Brick 2 x 3

Brick 2 x 3

×2

Brick 2 x 3

×4

Brick 2 x 2

×2

Brick 2 x 2

×10

Brick 2 x 2

×8

Brick 2 x 2

×2

Brick 2 x 2

×9

Brick 2 x 2

×5

Brick 2 x 2

Brick 1 x 2

×3

Brick 1 x 2

×7

Brick 1 x 2

×2

Brick 1 x 2

×7

Brick 1 x 2

×8

Brick 1 x 2

×10

Brick 1 x 2

×45

Brick 1 x 2

Brick 1 x 2

×30

Brick 1 x 2

×5

Brick 1 x 1

×2

Brick 1 x 1

×5

Brick 1 x 1

×10

Brick 1 x 1

×3

Brick 1 x 1

×26

Brick 1 x 1

×40

Brick 1 x 1

×8

Brick 1 x 1

×10

Brick 2 x 8

Brick 2 x 8

×2

Brick 1 x 8

×5

Brick 1 x 8

×5

Brick 1 x 6

×3

Brick 1 x 6

Brick 1 x 6

×20

Brick 1 x 6

×4

Brick 1 x 6

×2

Brick 1 x 6

×16

Arch 1 x 5 x 4 Inverted

×4

Brick 1 x 4

×4

Brick 1 x 4

×25

Brick 1 x 4

Brick 1 x 4

×11

Brick 1 x 4

×14

Brick 1 x 4

Brick 1 x 4

Minifigure, Utensil Crystal Ball Globe 2 x 2 x 2

Brick, Modified 1 x 2 with Log Profile

×4

Rock 1 x 1 Jewel 24 Facet

×2

Rock 1 x 1 Jewel 24 Facet

×2

Plate 2 x 4

×8

Plate 2 x 4

×4

Plate 2 x 4

×13

Plate 2 x 4

×9

Plate 2 x 4

×23

Plate 2 x 4

×21

Plate 2 x 4

×5

Plate 2 x 4

Plate 2 x 3

×8

Plate 2 x 3

×4

Plate 2 x 3

×28

Plate 2 x 3

Plate 2 x 3

×17

Plate 2 x 3

×3

Plate 2 x 2

×5

Plate 2 x 2

×3

Plate 2 x 2

×43

Plate 2 x 2

×7

Plate 2 x 2

×14

Plate 2 x 2

×4

Plate 1 x 2

×18

Plate 1 x 2

Plate 1 x 2

×33

Plate 1 x 2

×97

Plate 1 x 2

×15

Plate 1 x 2

×30

Plate 1 x 2

×15

Plate 1 x 2

×95

Plate 1 x 2

×22

Plate 1 x 2

×58

Plate 1 x 2

×4

Plate 1 x 1

×65

Plate 1 x 1

×15

Plate 1 x 1

×10

Plate 1 x 1

×9

Plate 1 x 1

×47

Plate 1 x 1

×21

Plate 1 x 1

×37

Plate 1 x 1

×5

Plate 1 x 1

×7

Plate 4 x 12

×6

Flag 7 x 3 with Bar Handle

×2

Plate 4 x 10

×6

Plate 4 x 10

×3

Plate 4 x 10

Plate 4 x 4

×6

Plate 4 x 4

×5

Plate 4 x 6

×5

Plate 4 x 6

×11

Plate 6 x 10

×14

Plate 2 x 8

×2

Plate 2 x 8

×15

Plate 2 x 8

×8

Plate 2 x 8

×5

Plate 2 x 8

Plate 2 x 8

×6

Plate 4 x 8

×6

Plate 4 x 8

Plate 4 x 8

×2

Plate 4 x 8

Plate 6 x 8

×5

Plate 6 x 8

×4

Plate 6 x 8

×5

Plate 6 x 8

Slope 18 4 x 2

×2

Slope 18 4 x 2

×5

Slope 45 2 x 4

Bar 4L (Lightsaber Blade / Wand)

×7

Bar 4L (Lightsaber Blade / Wand)

×2

Arm Mechanical, Battle Droid

×3

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×2

Slope 45 2 x 2

×3

Slope 45 2 x 2

×2

Slope 45 2 x 1

×6

Slope 45 2 x 1

×16

Slope 45 2 x 1

×10

Slope 45 2 x 1

×19

Slope 45 2 x 1

×8

Slope 45 2 x 1

×16

Slope 45 2 x 1

×8

Slope 45 2 x 1

×21

Brick, Modified 1 x 4 with Studs on Side

×17

Slope 45 2 x 2 Double

×16

Slope 45 2 x 2 Double Convex Corner

×8

Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder

×35

Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder

×7

Wedge, Plate 4 x 4 Cut Corner

×4

Wedge, Plate 4 x 4 Cut Corner

×5

Wedge, Plate 4 x 4 Cut Corner

×2

Wedge, Plate 8 x 8 Cut Corner

×2

Cylinder Quarter 4 x 4 x 6

×10

Brick, Round 1 x 1

×21

Brick 1 x 2 without Bottom Tube

×4

Tile 2 x 2

Tile 2 x 2

Tile 2 x 2

×9

Tile 2 x 2

×19

Tile 2 x 2

×5

Tile 2 x 2

×2

Tile 2 x 2

×2

Tile 1 x 2

×31

Tile 1 x 2

×42

Tile 1 x 2

×20

Tile 1 x 2

Tile 1 x 2

×18

Tile 1 x 2

×11

Tile 1 x 2

×11

Tile 1 x 2

×2

Tile 1 x 2 with Envelope with Red Wax Seal and Light Bluish Gray Highlights Pattern

Tile 1 x 1

×5

Tile 1 x 1

×3

Tile 1 x 1

×8

Tile 1 x 1

×2

Barb / Claw / Horn / Tooth with Clip, Angled

×12

Plate, Modified 1 x 2 with Pin Hole on End

×4

Technic, Brick 1 x 2 with Holes

Technic, Plate 2 x 6 with 5 Holes

×2

Plate, Modified 1 x 2 with Door Rail

×25

Plate, Modified 1 x 2 with Door Rail

×8

Technic, Axle and Pin Connector Angled #2 - 180 degrees

Technic, Axle 2L Notched

×9

Technic, Brick 1 x 2 with Axle Hole

Technic, Brick 1 x 2 with Axle Hole

×6

Technic, Axle 5L

×2

Technic, Axle 5.5L with Stop

Technic, Gear 20 Tooth Double Bevel

×3

Technic, Gear 12 Tooth Double Bevel

×5

Brick 1 x 2 x 2 with Inside Stud Holder

Brick 1 x 2 x 2 with Inside Stud Holder

Technic, Liftarm Thick 1 x 3

×2

Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×6

Slope, Curved 2 x 2 x 2/3 Inverted

×5

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×5

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×3

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×50

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×9

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×6

Slope 33 3 x 2

×9

Slope 33 3 x 2

×2

Slope 33 2 x 4 Double

×41

Hot Dog / Sausage

×3

Carrot / Club

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×21

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×39

Tile, Modified 2 x 2 with Studs on Edge

×8

Tile, Modified 2 x 2 with Studs on Edge

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with Studs on Edge

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with 2 1 x 1 Curved Cutouts (Double Arrow)

×10

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate 1 x 8

×8

Plate 1 x 8

×7

Plate 1 x 8

×6

Plate 1 x 8

×2

Plate 1 x 8

×8

Wedge 5 x 2 Left

×2

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×14

Wedge 5 x 2 Right

×2

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×6

Plate, Round 1 x 2 with Open Studs

×4

Tile, Modified 2 x 2 Triangular

×28

Tile, Modified 2 x 2 Triangular

×27

Brick 1 x 3

×2

Brick 1 x 3

×7

Brick 1 x 3

×56

Brick 1 x 3

×13

Brick 1 x 3

×3

Plate 1 x 3

×4

Plate 1 x 3

×29

Plate 1 x 3

×4

Plate 1 x 3

×27

Plate 1 x 3

×2

Minifigure, Head without Face with White Tree in Orange and Red Flames, Bright Green Hobbit Hill in Flames Pattern (Palantír, Palantir)

Arch 1 x 4

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×9

Slope, Inverted 45 2 x 1

×12

Slope, Inverted 45 2 x 1

×11

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

Plate 1 x 6

×5

Plate 1 x 6

Plate 1 x 6

×2

Plate 1 x 6

×19

Plate 1 x 6

Plate 1 x 6

×7

Plate 1 x 6

×3

Slope, Inverted 45 2 x 2 Double Convex

×2

Bracket 1 x 1 - 1 x 1 Inverted

×16

Bracket 1 x 1 - 1 x 1

Slope 75 2 x 2 x 3 - Solid Studs

×2

Slope 75 2 x 2 x 3 - Solid Studs

×2

Slope 75 2 x 2 x 3 - Solid Studs

×4

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 2 with Hole

×5

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 8 with Holes

Technic, Axle 4L

×5

Plate 1 x 4

×2

Plate 1 x 4

×3

Plate 1 x 4

×2

Plate 1 x 4

×58

Plate 1 x 4

×6

Plate 1 x 4

×26

Plate 1 x 4

×6

Plate 1 x 4

Plate 1 x 4

×7

Technic Bush

×2

Technic Bush

×3

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×4

Minifigure, Utensil Candle

×6

Wave Rounded Straight Single with Small Pin End (Candle Flame)

×6

Plate 2 x 6

Plate 2 x 6

×14

Plate 2 x 6

×3

Plate 2 x 6

Plate 2 x 6

×8

Plate 2 x 6

×6

Plate 2 x 10

×4

Plate 2 x 10

×2

Plate 2 x 10

×5

Plate 2 x 10

×2

Plate 2 x 10

Technic, Brick 1 x 6 with Holes

×9

Hinge Brick 1 x 2 Base

Hinge Brick 1 x 2 Base

×7

Hinge Brick 1 x 2 Base

Hinge Brick 1 x 2 Top Plate

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×3

Plate 6 x 6

×2

Plate 6 x 6

Plate 6 x 6

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

×9

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×8

Plate, Round 2 x 2 with Axle Hole

×6

Brick, Modified 1 x 1 with Headlight

×4

Plate, Round 1 x 1

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×6

Plate 8 x 8

Tile 1 x 8

×8

Tile 1 x 8

×8

Tile 1 x 8

Bracket 2 x 2 - 1 x 2 Centered

×4

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

Wedge 6 x 2 Right

×2

Wedge 6 x 2 Right

×2

Wedge 6 x 2 Left

×2

Wedge 6 x 2 Left

×2

Wedge, Plate 4 x 2 Right

×11

Wedge, Plate 4 x 2 Left

×11

Wedge, Plate 4 x 2 Left

×2

Technic Bush 1/2 Smooth

×9

Technic, Pin 1/2 without Friction Ridges

×2

Plate 2 x 16

×7

Slope 33 3 x 1

×8

Slope 33 3 x 1

×6

Slope 33 3 x 1

×2

Slope 33 3 x 1

×5

Slope, Inverted 33 3 x 1

×6

Slope, Inverted 33 3 x 1

×9

Turkey Drumstick, 22mm with Oval Opening on Back

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×24

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×10

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×2

Technic, Axle 1L with Pin with Friction Ridges

×3

Minifigure, Utensil Pot Cauldron 3 x 3 x 1 & 3/4 with Handles

Wedge 4 x 4 (Slope 18 Corner)

×3

Wedge 4 x 2 Triple Left

×2

Wedge 4 x 2 Triple Left

×3

Wedge 4 x 2 Triple Right

×2

Wedge 4 x 2 Triple Right

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

×3

Wedge, Plate 3 x 2 Left

×2

Wedge, Plate 3 x 2 Left

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Slope 75 2 x 1 x 3 - Hollow Stud

Bracket 1 x 2 - 2 x 2

×2

Bracket 1 x 2 - 2 x 2

×5

Plate 1 x 10

×6

Plate 1 x 10

×7

Plate 1 x 10

×7

Plate 1 x 10

×5

Plate, Modified 1 x 2 with Open O Clip on Top

×8

Plate, Modified 1 x 2 with Open O Clip on Top

×3

Arch 1 x 3

×2

Minifigure, Plume Feather Small

×3

Plate, Modified 1 x 8 with Door Rail

×2

Technic, Axle 3L

Technic, Axle 3L

Minifigure, Utensil Saucepan

Brick, Round 1 x 1 with Fins

×2

Cone 1 x 1 with Top Groove

×3

Cone 1 x 1 with Top Groove

Tap 1 x 1 without Hole in Nozzle End

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Brick, Modified 1 x 1 with Studs on 4 Sides

×10

Wedge, Plate 12 x 3 Left

Dish 2 x 2 Inverted (Radar)

×2

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×2

Brick, Round Corner 4 x 4 Macaroni with 3 Studs

×16

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×3

Slope, Curved 1 x 1 x 2/3 Double

Plate, Modified 1 x 1 with Tooth Horizontal

×68

Plate, Modified 1 x 1 with Tooth Horizontal

×4

Plate, Modified 1 x 1 with Tooth Horizontal

×12

Wedge, Plate 8 x 3 Pentagonal Right

×2

Slope, Curved 3 x 1

×6

Brick, Modified 1 x 2 with Studs on 2 Sides

×11

Barb / Claw / Horn / Tooth - Small

×19

Minifigure, Weapon Axe Head with Clip

×2

Slope 30 1 x 1 x 2/3

×53

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×7

Slope 30 1 x 1 x 2/3

×26

Slope 30 1 x 1 x 2/3

×26

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×49

Wedge, Plate 6 x 3 Left

Minifigure, Shield Broad Pointed Bottom and Cutout Corner with Dark Silver Scratches and Rivets and Reddish Brown Rust Pattern

×4

Minifigure, Headgear Helmet Castle / Fantasy Rounded with Rivets, Plates, and Damaged Cheek Protection

×3

Minifigure, Headgear Helmet Castle / Fantasy with Rivets, Mask with Eye Holes and Straight Cheek Protection

×2

Minifigure, Headgear Helmet Castle / Fantasy Rounded with Rivets, Mask with Eye Holes and Long Curved Beak

Minifigure, Headgear Helmet Castle / Fantasy with Rivets, Mask with Eye Holes and Long Nose Protection

Electric, Light Brick 2 x 3 x 1 1/3 with Trans-Red Top and Red LED Light

Panel 1 x 6 x 5

×3

Panel 1 x 6 x 5

×5

Panel 1 x 6 x 5

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Round 4 x 4 with Hole

×2

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Slope 18 4 x 1

×6

Slope 18 4 x 1

Slope 18 4 x 1

×2

Slope 18 4 x 1

×6

Plate 1 x 12

×9

Plate 1 x 12

×5

Plate 1 x 12

×2

Plate 1 x 12

Technic, Liftarm, Modified T-Shape Thick 3 x 3

Technic, Axle 9L

Arch 1 x 6 x 3 1/3 Curved Top

×4

Glass for Window 1 x 2 x 2 Flat Front with Tan Parchment Scrolls Pattern

×3

Wedge, Plate 6 x 6 Cut Corner

×2

Wedge, Plate 6 x 6 Cut Corner

×2

Brick 1 x 10

×3

Hinge Brick 2 x 2 Top Plate

×7

Hinge Brick 2 x 2 Top Plate

Plate, Modified 1 x 2 with Angular Extension with Molded Flexible Rubber Orange Tip Pattern

×2

Turntable 4 x 4 Square Base, Locking

×2

Tile, Modified 4 x 4 with Studs on Edge

×5

Tile, Modified 4 x 4 with Studs on Edge

Bar 1 x 4 x 3 Grille with End Protrusions

Vehicle, Mudguard 1 1/2 x 6 x 1 with Arch

×2

Tile 1 x 3

×4

Tile 1 x 3

×6

Tile 1 x 3

Tile 1 x 3

×3

Tile 1 x 3

×11

Tile 1 x 3

×6

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×5

Bar 6L with Stop Ring

×7

Bar 6L with Stop Ring

×6

Minifigure, Weapon Lightsaber Hilt Straight

×3

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×17

Fish

Technic, Gear Rack 1 x 13 with Axle and Pin Holes

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

×2

Technic, Axle 2L with Pin without Friction Ridges

×3

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×10

Technic, Brick 1 x 1 with Hole

×6

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×2

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

Bar 1L with Angled Hollow Stud

×3

Technic, Pin 3L with Friction Ridges

×6

Slope, Curved 4 x 1 x 2 2/3 with Stud

×4

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×2

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Tile 1 x 6

×2

Tile 1 x 6

Tile 1 x 6

×11

Minifigure, Weapon Hilt Smooth Extended

×5

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

×4

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

×4

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

×14

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

×2

Plant Flower Stem with Bar and 3 Stems Short

×2

Plant Flower Stem with Bar and 3 Stems Short

×2

Wedge, Plate 4 x 8 Cut Corners

Wedge, Plate 4 x 8 Cut Corners

Plate, Round Corner 3 x 3 with 2 x 2 Curved Cutout

×6

Tile 2 x 6

×10

Tile 2 x 6

×7

Tile 2 x 6

×6

Arch 1 x 3 Inverted

×14

Technic, Brick 1 x 1 with Axle Hole

×2

Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder

×2

Bracket 1 x 1 - 1 x 2 Inverted

×6

Bracket 1 x 1 - 1 x 2 Inverted

×2

Window 3 x 3 x 2 Round Corner

×3

Minifigure, Utensil Tool Sledgehammer (Mjolnir, Hammer)

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

×2

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×3

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×2

Plate 3 x 3 Corner

×2

Bar 2L with Stop Ring

×4

Plate 1 x 5

×17

Plate 1 x 5

×15

Plate 1 x 5

×9

Tile, Round Corner 3 x 3 Macaroni

×2

Tile, Round Corner 3 x 3 Macaroni

×2

Minifigure, Utensil Fork

×3

Wedge 3 x 2 Left No Studs

Wedge 3 x 2 Right No Studs

Slope 45 2 x 4 x 1 1/3 Double, Tapered

×7

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×2

Plate, Round 1 x 1 with Open Stud

×7

Plate, Round 1 x 1 with Open Stud

×9

Plate, Round 1 x 1 with Open Stud

×60

Plate, Round 1 x 1 with Open Stud

×9

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×34

Slope 30 1 x 2 x 2/3

×4

Slope 30 1 x 2 x 2/3

×21

Slope 30 1 x 2 x 2/3

×59

Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder

×18

Brick, Modified 1 x 1 x 2/3 with Open Stud

×21

Tile 2 x 4

×29

Tile 2 x 4

×21

Tile 2 x 4

Tile 2 x 4

×4

Tile 2 x 4

×5

Brick, Modified 1 x 1 with Stud on Side

×3

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×7

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×12

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×5

Brick, Modified Facet 2 x 2

×2

Bar 3L (Bar Arrow)

×4

Minifigure Armor Shoulder Pads with Spikes on Top

×2

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×18

Brick, Modified 2 x 2 with Channels and Axle Hole

Plate 2 x 14

×5

Chain 5 Links

Bone, Long

Slope 45 2 x 1 with 2/3 Cutout

×13

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope 45 2 x 1 with 2/3 Cutout

×2

Bone, Short

×5

Slope, Curved 4 x 1 x 2/3 Double

×3

Slope, Curved 4 x 1 x 2/3 Double

×2

Minifigure, Weapon Pike / Spear - Handle with Flat End

×8

Minifigure, Weapon Pike / Spear - Handle with Flat End

Minifigure, Utensil Bucket 1 x 1 x 1 Tapered with Handle Holders

Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand

×2

Brick and Axle Separator

Propeller 1 Blade 10L with Bar (Sword Blade)

×6

Tile, Round 1 x 1

×5

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×2

Brick, Modified 1 x 2 with Masonry Profile

×5

Plate, Round 2 x 2 with Pin Hole and 4 Bar Arms Up

×7

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Minifigure, Utensil Cleaver

Pneumatic Hose Connector with Axle Connector

Bracket 1 x 2 - 2 x 2 Inverted

×6

Bracket 1 x 2 - 2 x 2 Inverted

Minifigure, Utensil Ingot 1 x 2

×3

Bracket 1 x 2 - 1 x 2 Inverted

×5

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2

×4

Common questions about Barad-dûr

Explore more