Rivendell

About Rivendell

Rivendell (10316-1) is a LEGO Lord of the Rings set released in 2023, currently averaging $422.42 used on BrickLink. It comes with 19 minifigures worth a combined $248.09. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 893 pieces.

Part-out value

Minifig value: $248.09 out of $422.42 total (59%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

• Peregrin Took (Pippin) - Dark Blue Jacket, Reddish Brown Cape ($20.38) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
• 19 minifigures at $248.09 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
• 893 parts makes this a substantial set. If selling used, confirm completeness before listing — incomplete large sets sell at a steep discount. Use the parts list on this page to check.

Minifigures in Rivendell (19)

Frodo Baggins - Reddish Brown Jacket, Light Nougat Feet, Dark Green Cape

lor112$14.99

Samwise Gamgee (Sam) - Dark Tan Jacket, Sand Blue Cape

lor113$14.31

Elf Statue - Straight Hair, Skirt

lor114×2$4.19

Elf Statue - Wavy Hair, Legs

lor115×2$4.01

Elf Statue - Straight Hair, Legs

lor116$4.44

Bilbo Baggins - White Hair

lor117$9.26

Gloin the Dwarf - White Hair

lor118$10.10

Gimli - Medium Legs

lor119$17.34

Rivendell Elf - Female, Dark Bluish Gray Robe

lor120$12.64

Arwen - White Dress

lor121$15.07

Rivendell Elf - Male, Dark Bluish Gray Shirt and Legs

lor122$11.12

Peregrin Took (Pippin) - Dark Blue Jacket, Reddish Brown Cape

lor123$20.38

Meriadoc Brandybuck (Merry) - Dark Green Jacket, Medium Nougat Hair

lor124$20.37

Gandalf the Grey - Wizard / Witch Hat, Robe, Spongy Cape

lor125$14.27

Boromir - Dark Blue Legs

lor126$16.18

Legolas - Black Boots

lor127$15.95

Elrond - Dark Red Robe

lor128$15.90

Aragorn - Dark Brown Legs

lor129$15.43

Elf Statue - Wavy Hair, Skirt

lor130$3.92

Parts (893)

Sticker Sheet for Set 10316, Sheet 1 - (10102114/6422763)

Sticker Sheet for Set 10316, Sheet 2 - (10103464/6435497)

Minifigure, Utensil Ring 1 x 1

×3

Bar Holder with Clip

Bar Holder with Clip

×2

Bar Holder with Clip

×2

Bar Holder with Clip

×16

Brick, Modified 1 x 2 with Studs on 1 Side

×5

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Brick, Modified 1 x 2 with Studs on 1 Side

Plate 3 x 3

×5

Plate 3 x 3

×7

Plate 3 x 3

Plate 3 x 3

×3

Technic, Axle 1L with Pin 2L with Friction Ridges

Tile, Round 1 x 2 Oval

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×7

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 2 x 1 x 2/3

×10

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×10

Wedge 2 x 2 (Slope 45 Corner)

×23

Cattle Horn, Long

×3

Cattle Horn, Long

×4

Arch 1 x 3 x 3

Brick, Modified Facet 4 x 4

Brick, Modified Facet 4 x 4

×2

Plate, Modified 1 x 2 with Tow Ball on Side

×3

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

×3

Brick 1 x 1 x 3

×12

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Tile 2 x 2 Corner

×2

Tile 2 x 2 Corner

×4

Tile, Round 2 x 2 with Bottom Stud Holder

Tile, Round 2 x 2 with Bottom Stud Holder

×8

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×21

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3

×8

Slope, Curved 2 x 2 x 2/3

×7

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3 with Robe, Light Bluish Gray Center Panel and Copper Sash with Silver Filigree Pattern (Elrond Robe)

Slope, Curved 2 x 2 x 2/3 with Robe, Dark Brown Pouch, and Reddish Brown Belt Pattern (Gandalf Robe)

Road Sign 2 x 2 Square with Open O Clip

×23

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×2

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×11

Brick, Modified 1 x 4 with Masonry Profile

×3

Tile, Round 2 x 2 with Hole

Tile, Round 2 x 2 with Hole

×4

Slope 45 2 x 1 Triple with Bottom Stud Holder

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×35

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×16

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×6

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×5

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×7

Wedge, Plate A-Shape with 2 Rows of 4 Studs

Tile, Modified 1 x 1 with Open O Clip

×6

Tile, Modified 1 x 1 with Open O Clip

Tile, Modified 1 x 1 with Open O Clip

×11

Tile, Modified 1 x 1 with Open O Clip

Arch 1 x 8 x 2 Raised

Arch 1 x 8 x 2 Raised

×3

Plate, Round 1 x 2 Half with 1 Stud (Jumper)

×8

Tile 4 x 4

×2

Arch 1 x 3 x 2 Inverted

×3

Technic, Liftarm Thick 1 x 1 (Spacer)

×7

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Tile, Round 2 x 2 with Open Stud

×2

Tile, Round 2 x 2 with Open Stud

Tile, Round 2 x 2 with Open Stud

×3

Plate, Modified 1 x 2 with Pin Hole on Bottom

×11

Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports

×2

Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports

×7

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×2

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×11

Tile, Round 1 x 1 with Bar and Small Pin Hole

×4

Tile, Round 1 x 1 with Bar and Small Pin Hole

×4

Tile, Round 1 x 1 with Bar and Small Pin Hole

×9

Tile, Round 1 x 1 with Bar and Small Pin Hole

×26

Brick, Round 1 1/2 x 1 1/2 x 2/3 Dome Top

×4

Tile, Modified 2 x 3 Pentagonal

Tile, Modified 2 x 3 Pentagonal

Tile, Modified 2 x 3 Pentagonal

×2

Tile, Modified 2 x 3 Pentagonal with Dark Orange, Olive Green, Nougat, and Sand Blue Angular Shapes Pattern

×7

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×20

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Plate, Round Half 4 x 8

Plate, Round Half 4 x 8

×6

Technic, Axle and Pin Connector Hub with 1L Axle

×7

Technic, Axle and Pin Connector Hub with 1L Axle

×3

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×2

Arch 1 x 5 x 4 - Continuous Bow

Arch 1 x 5 x 4 - Continuous Bow

×18

Minifigure, Utensil Goblet

×2

Bar Holder with Handle

×12

Bar Holder with Handle

×5

Bar Holder with Handle

×9

Brick 2 x 2 Corner

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×12

Panel 1 x 2 x 1 with Rounded Corners and 2 Sides

Minifigure, Utensil Book Cover

Minifigure, Utensil Book Cover

Technic, Axle Connector Hub with 2 Bar Holders Perpendicular

×8

Plant Leaves 6 x 5

×4

Plant Leaves 6 x 5

×2

Plant Leaves 6 x 5

×6

Plant Leaves 6 x 5

×14

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×9

Plate 2 x 2 Corner

×5

Plate 2 x 2 Corner

×2

Slope, Curved 2 x 1 x 2/3 Inverted

×18

Slope, Curved 2 x 1 x 2/3 Inverted

×3

Slope, Curved 2 x 1 x 2/3 Inverted

Slope, Curved 2 x 1 x 2/3 Inverted

×2

Plant Leaves 4 x 3

×16

Tile, Round 1 x 1 Half Circle Extended

×10

Tile, Round 1 x 1 Half Circle Extended

×2

Tile, Round 1 x 1 Half Circle Extended

×27

Wedge, Plate 2 x 2 Left

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Wedge, Plate 2 x 2 Right

×2

Slope, Curved 3 x 2

×6

Tile 1 x 4

×7

Tile 1 x 4

×10

Tile 1 x 4

×5

Tile 1 x 4

×17

Tile 1 x 4

×2

Tile 1 x 4

×8

Tile 1 x 4

×7

Tile 1 x 4

×26

Tile 1 x 4

×10

Technic, Axle 3L with Stop

×3

Tile, Modified 1 x 2 with Bar Handle

×2

Minifigure, Utensil Book Binding with 2 Studs

Minifigure, Utensil Book Binding with 2 Studs

Plate 2 x 12

×5

Plate 2 x 12

×3

Plate 2 x 12

×2

Minifigure, Weapon Spear Tip with Fins

×3

Wedge, Plate 3 x 3 Cut Corner

×3

Wedge, Plate 3 x 3 Cut Corner

×8

Brick 1 x 1 x 5 - Solid Stud

Brick 1 x 1 x 5 - Solid Stud

Brick 1 x 2 x 5

×3

Brick 1 x 2 x 5

×4

Brick 1 x 2 x 5

Brick 2 x 6

×2

Brick 2 x 6

Brick 2 x 6

×2

Brick 2 x 6

Brick 2 x 6

×4

Tile, Modified 2 x 2 with Pin

×2

Brick 1 x 16

×2

Brick 1 x 16

×2

Plant Flower Stem with Bar Holder, Bar, and 3 Stems

×4

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×50

Container, Barrel 2 x 2 x 2

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×19

Tile, Round 1 x 1 Quarter

×2

Tile, Round 1 x 1 Quarter

×17

Tile, Round 1 x 1 Quarter

×8

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×23

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 1 x 1 with Bar Handle

×4

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Wedge, Plate 2 x 2 Cut Corner

Wedge, Plate 2 x 2 Cut Corner

×9

Wedge, Plate 2 x 2 Cut Corner

×5

Wedge, Plate 2 x 2 Cut Corner

×2

Tile 2 x 3

Tile 2 x 3

Tile 2 x 3

×3

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×3

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×12

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×4

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×4

Minifigure, Weapon Pack The Lord of the Rings, 16 in Bag (Multipack)

Plant Plate, Round 1 x 1 with Curved, Upright Leaf

×34

Tile, Modified Facet 2 x 2

×18

Tile, Round Corner 4 x 4 Macaroni

Tile, Round Corner 4 x 4 Macaroni

×5

Tile, Round Corner 4 x 4 Macaroni

×2

Technic, Pin with Short Friction Ridges

×6

Tile, Round Corner 2 x 2 Macaroni

×3

Tile, Round Corner 2 x 2 Macaroni

×4

Tile, Round Corner 2 x 2 Macaroni

×17

Slope 45 2 x 1 with Cutout without Stud

×4

Slope 45 2 x 1 with Cutout without Stud

×20

Slope 45 2 x 1 with Cutout without Stud

×14

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×6

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

Plant Stem, Curved with Bar, Thorns, and Swirls

×30

Plant Stem, Curved with Bar, Thorns, and Swirls

×4

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick, Modified 1 x 1 with Bar Handle

×4

Brick 2 x 4

×16

Brick 2 x 4

×2

Brick 2 x 4

×18

Brick 2 x 4

×4

Brick 2 x 4

×20

Brick 2 x 3

×2

Brick 2 x 3

×19

Brick 2 x 3

×14

Brick 2 x 2

×2

Brick 2 x 2

×4

Brick 2 x 2

×25

Brick 2 x 2

Brick 2 x 2

×37

Brick 2 x 2

Brick 1 x 2

×10

Brick 1 x 2

×2

Brick 1 x 2

×11

Brick 1 x 2

×3

Brick 1 x 2

×47

Plate, Modified 1 x 4 with Bar Arm Down

×7

Window 1 x 2 x 2 2/3 with Rounded Top

×4

Brick 1 x 1

×7

Brick 1 x 1

×2

Brick 1 x 1

×15

Brick 1 x 1

×46

Brick 1 x 1

×12

Brick 1 x 1

×17

Brick 2 x 10

×4

Brick 2 x 10

Brick 2 x 8

×9

Brick 2 x 8

Brick 1 x 8

Brick 1 x 8

×3

Brick 1 x 8

Brick 1 x 8

×4

Brick 1 x 8

×3

Brick 1 x 8

×2

Brick 1 x 8

×4

Brick 1 x 6

×3

Brick 1 x 6

Brick 1 x 6

×7

Brick 1 x 6

×8

Brick 1 x 4

×9

Brick 1 x 4

×7

Brick 1 x 4

Brick 1 x 4

×4

Brick 1 x 4

×4

Brick 1 x 4

×4

Brick 1 x 4

×30

Brick 1 x 4

×6

Brick, Modified 1 x 2 with Log Profile

×5

Brick, Modified 1 x 2 with Log Profile

×16

Brick, Modified 1 x 2 with Log Profile

×6

Brick, Modified 1 x 2 with Log Profile

×8

Brick, Modified 1 x 4 with Log Profile

Minifigure, Utensil Sextant / Quadrant

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

×4

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

×2

Plate 2 x 4

×4

Plate 2 x 4

Plate 2 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

×11

Plate 2 x 4

Plate 2 x 4

×2

Plate 2 x 4

×17

Plate 2 x 4

×7

Plate 2 x 4

×6

Plate 2 x 3

Plate 2 x 3

×6

Plate 2 x 3

×2

Plate 2 x 3

×2

Plate 2 x 3

×11

Plate 2 x 3

×4

Plate 2 x 3

×4

Plate 2 x 2

×7

Plate 2 x 2

×3

Plate 2 x 2

×3

Plate 2 x 2

×6

Plate 2 x 2

×19

Plate 2 x 2

Plate 2 x 2

Plate 2 x 2

×8

Ice Pop (Freezer / Lollipop / Lolly / Pole / Popsicle / Stick)

×7

Plate 1 x 2

×3

Plate 1 x 2

×12

Plate 1 x 2

×9

Plate 1 x 2

×2

Plate 1 x 2

×13

Plate 1 x 2

×7

Plate 1 x 2

×19

Plate 1 x 2

×3

Plate 1 x 2

×2

Plate 1 x 2

×2

Plate 1 x 2

×3

Plate 1 x 2

×3

Plate 1 x 2

×123

Plate 1 x 2

×11

Plate 1 x 2

×15

Plate 1 x 2

×27

Plate 1 x 1

×8

Plate 1 x 1

×2

Plate 1 x 1

×3

Plate 1 x 1

×13

Plate 1 x 1

×4

Plate 1 x 1

×3

Plate 1 x 1

×18

Plate 1 x 1

×3

Plate 1 x 1

×59

Plate 1 x 1

×5

Plate 1 x 1

×3

Plate 4 x 12

×3

Flag 7 x 3 with Bar Handle

Plate 4 x 10

×3

Plate 4 x 4

×2

Plate 4 x 4

×2

Plate 4 x 6

×3

Plate 4 x 6

×2

Plate 6 x 10

×3

Plate 2 x 8

Plate 2 x 8

×3

Plate 2 x 8

×4

Plate 2 x 8

×3

Plate 2 x 8

×4

Plate 2 x 8

×2

Plate 2 x 8

×2

Plate 2 x 8

×3

Minifigure, Utensil Flotation Ring (Life Preserver)

×12

Plate 4 x 8

×2

Plate 4 x 8

×2

Plate 4 x 8

×4

Plate 4 x 8

Plate 4 x 8

×9

Plate, Round Corner 3 x 3

Plate 6 x 8

×2

Plate 6 x 8

Plate 6 x 8

×2

Plate 6 x 8

×2

Plate 6 x 8

×3

Slope 18 4 x 2

Slope 45 2 x 4

×4

Bar 4L (Lightsaber Blade / Wand)

×6

Bar 4L (Lightsaber Blade / Wand)

×4

Bar 4L (Lightsaber Blade / Wand)

×4

Arm Mechanical, Battle Droid

×3

Hinge Plate 1 x 2 Locking with 1 Finger on Top

Slope 45 2 x 1

×16

Slope 45 2 x 1

×8

Slope 45 2 x 1

×47

Brick, Modified 1 x 4 with Studs on Side

×9

Slope 45 2 x 2 Double

×2

Slope 45 2 x 2 Double Convex Corner

×2

Plate, Round Corner 4 x 4

Brick, Round 1 x 1

×4

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×33

Brick, Round 1 x 1

×24

Brick, Round 1 x 1

×12

Brick, Round 1 x 1

×5

Brick, Round 1 x 1

×6

Brick, Round 1 x 1

×8

Brick 1 x 2 without Bottom Tube

Tile 2 x 2

×3

Tile 2 x 2

×2

Tile 2 x 2

×4

Tile 2 x 2

×3

Tile 2 x 2

×25

Tile 2 x 2

Tile 2 x 2 with Dark Orange, Olive Green, Nougat, and Sand Blue Angular Shapes Pattern

×6

Tile 2 x 2 with Dark Orange Pointed Ovals in Nougat and Olive Green Quarters Pattern

×64

Tile 1 x 2

×9

Tile 1 x 2

×2

Tile 1 x 2

Tile 1 x 2

×3

Tile 1 x 2

Tile 1 x 2

×2

Tile 1 x 2

×4

Tile 1 x 2

×23

Tile 1 x 2

×47

Tile 1 x 2

×2

Tile 1 x 2

×12

Tile 1 x 2 with Reddish Brown Text and Plant Pattern

Tile 1 x 1

×5

Tile 1 x 1

×135

Tile 1 x 1

×131

Tile 1 x 1

×97

Tile 1 x 1

×98

Tile 1 x 1

×3

Tile 1 x 1

×3

Tile 1 x 1

×26

Container, Box 2 x 2 x 1 Half with Stud and 4 Corner Supports

×3

Plate, Modified 2 x 3 with Hole

×38

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×6

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×3

Technic, Axle Connector with Axle Hole

×4

Technic, Axle 2L Notched

×18

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Axle 5L

×2

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Liftarm Thin 1 x 4 - Axle Holes

×2

Brick 1 x 2 x 2 with Inside Stud Holder

×5

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×72

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×18

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×15

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×54

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×15

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×41

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×3

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×12

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×18

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×10

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Slope 33 3 x 2

×2

Hot Dog / Sausage

×17

Carrot / Club

Plant Stem with Bar (Carrot Top / Twig)

×6

Tile, Modified 2 x 2 with Studs on Edge

×6

Tile, Modified 2 x 2 with Studs on Edge

×11

Tile, Modified 2 x 2 with Studs on Edge

×22

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×11

Plate 1 x 8

Plate 1 x 8

×7

Plate 1 x 8

×7

Plate 1 x 8

×3

Plate 1 x 8

×5

Brick, Modified 1 x 2 with Bar Handle on End - Bar Flush with Edge

Tile, Modified 1 x 3 Inverted with Hole

×2

Slope 45 1 x 1 x 2/3 Double

×37

Plate, Round 1 x 2 with Open Studs

×27

Plate, Round 1 x 2 with Open Studs

×37

Plate, Round 1 x 2 with Open Studs

Minifigure, Weapon Hoop Blade / Chakram

Tile, Modified 2 x 2 Triangular

×8

Brick 1 x 3

×13

Brick 1 x 3

×19

Brick 1 x 3

×8

Plate 1 x 3

Plate 1 x 3

×3

Plate 1 x 3

×2

Plate 1 x 3

×2

Plate 1 x 3

×9

Plate 1 x 3

Plate 1 x 3

×23

Plate 1 x 3

Plate 1 x 3

Arch 1 x 4

Arch 1 x 4

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Slope, Inverted 45 2 x 1

×2

Slope, Inverted 45 2 x 1

×7

Slope, Inverted 45 2 x 1

×11

Slope, Inverted 45 2 x 1

×13

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

×6

Plate 1 x 6

×7

Plate 1 x 6

×2

Plate 1 x 6

×7

Plate 1 x 6

Plate 1 x 6

×3

Plate 1 x 6

×2

Plate 1 x 6

×20

Plate 1 x 6

Plate 1 x 6

×2

Slope, Inverted 45 2 x 2 Double Convex

×6

Slope 65 2 x 2 x 2 with Bottom Tube

Minifigure, Hair Long, Parted in Center

Minifigure, Hair Long, Parted in Center

Bracket 1 x 1 - 1 x 1 Inverted

×2

Slope 75 2 x 2 x 3 Double Convex

×8

Slope 75 2 x 2 x 2 Quadruple Convex

×2

Technic, Brick 1 x 2 with Hole

×4

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

×7

Technic, Brick 1 x 8 with Holes

Technic, Axle 4L

×5

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Plate 1 x 4

×2

Plate 1 x 4

×5

Plate 1 x 4

×6

Plate 1 x 4

×4

Plate 1 x 4

×4

Plate 1 x 4

×8

Plate 1 x 4

×42

Plate 1 x 4

×10

Plate 1 x 4

×7

Slope, Curved 1 x 2 with Bottom Stud Holder

Slope, Curved 1 x 2 with Bottom Stud Holder

×3

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×5

Plant Stem with Bar, 3 Leaves, and Small Pin Hole

×2

Plant Stem with Bar, 3 Leaves, and Small Pin Hole

×6

Minifigure, Utensil Candle

×91

Minifigure, Utensil Candle

×6

Wave Rounded Straight Single with Small Pin End (Candle Flame)

×21

Minifigure, Utensil Lantern

×2

Plate 2 x 6

Plate 2 x 6

×3

Plate 2 x 6

Plate 2 x 6

×4

Plate 2 x 6

×2

Plate 2 x 6

×2

Plate 2 x 6

×7

Plate 2 x 6

×4

Plate 2 x 6

×5

Hinge Brick 1 x 4 Swivel Top

×2

Hinge Brick 1 x 4 Swivel Base

×2

Plate 2 x 10

×2

Plate 2 x 10

×6

Plate 2 x 10

×4

Minifigure, Utensil Shovel / Spade - Handle with Round End

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

×8

Arch 1 x 2 Jumper

×6

Hinge Brick 1 x 2 Base

×4

Hinge Brick 1 x 2 Base

×2

Hinge Brick 1 x 2 Top Plate

×4

Support 2 x 2 x 2 Stand with Complete Hole

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

Brick, Round 2 x 2 with Axle Hole

×14

Brick, Round 2 x 2 with Axle Hole

×2

Plate 6 x 6

×2

Plate 6 x 6

Plate 6 x 6

Door, Frame 1 x 6 x 7 Arched with Notches and Rounded Pillars

×4

Door, Frame 1 x 6 x 7 Arched with Notches and Rounded Pillars

×4

Plate, Round 2 x 2 with Axle Hole

×21

Plate, Round 2 x 2 with Axle Hole

×9

Plate, Round 2 x 2 with Axle Hole

Plate, Round 2 x 2 with Axle Hole

×5

Plate, Round 2 x 2 with Axle Hole

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

×6

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

×10

Dinosaur Tail End Section / Horn

×10

Dinosaur Tail End Section / Horn

×19

Brick, Modified 1 x 1 with Headlight

×2

Brick, Modified 1 x 1 with Headlight

×4

Brick, Modified 1 x 1 with Headlight

×11

Brick, Modified 1 x 1 with Headlight

×2

Brick, Modified 1 x 1 with Headlight

×3

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×6

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×44

Plate, Round 1 x 1

×32

Plate, Round 1 x 1

×46

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×4

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×5

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×18

Tile 1 x 8

Tile 1 x 8

×5

Tile 1 x 8

×4

Technic, Liftarm Thin 1 x 2 - Axle Holes

×6

Bracket 2 x 2 - 1 x 2 Centered

×2

Bracket 2 x 2 - 1 x 2 Centered

×6

Bracket 2 x 2 - 1 x 2 Centered

×18

Bracket 2 x 2 - 1 x 2 Centered

×2

Bracket 2 x 2 - 1 x 2 Centered

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×10

Wedge 6 x 2 Right

Wedge 6 x 2 Left

Wedge, Plate 4 x 2 Right

×3

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Right

×3

Wedge, Plate 4 x 2 Left

×3

Wedge, Plate 4 x 2 Left

Wedge, Plate 4 x 2 Left

×3

Bird, Small

×2

Vehicle, Mudguard 2 x 4 with Flared Wings

Technic Bush 1/2 Smooth

×13

Technic, Pin 1/2 without Friction Ridges

×2

Plate 2 x 16

×4

Plate 2 x 16

×2

Slope 33 3 x 1

×11

Slope 33 3 x 1

×21

Wedge 3 x 3 Sloped Left

×5

Slope, Inverted 33 3 x 1

Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom

×3

Technic, Axle 1L with Pin with Friction Ridges

Wedge, Plate 3 x 2 Right

×4

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

×4

Wedge, Plate 3 x 2 Left

Support 1 x 1 x 6 Solid Pillar

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

Bracket 1 x 2 - 2 x 2

Bracket 1 x 2 - 2 x 2

×3

Bracket 1 x 2 - 2 x 2

×7

Bracket 1 x 2 - 2 x 2

×11

Plate 1 x 10

×2

Plate 1 x 10

×6

Plate 1 x 10

Plate 1 x 10

×6

Plate 1 x 10

×4

Plate 1 x 10

Plate 1 x 10

×2

Plate, Modified 1 x 2 with Open O Clip on Top

×2

Plate, Modified 1 x 2 with Open O Clip on Top

×2

Plate, Modified 1 x 2 with Open O Clip on Top

×7

Brick, Modified 1 x 2 with Pin and Bottom Stud Holder

Arch 1 x 3

×3

Minifigure, Plume Feather Small

×4

Technic, Axle 3L

×13

Minifigure, Utensil Tool Mallet / Hammer

Minifigure, Utensil Frying Pan

Cone 1 x 1 with Top Groove

×21

Cone 1 x 1 with Top Groove

Cone 1 x 1 with Top Groove

×2

Cone 1 x 1 with Top Groove

Cone 1 x 1 with Top Groove

×4

Cone 1 x 1 with Top Groove

×4

Cone 1 x 1 with Top Groove

×9

Plate, Modified 1 x 4 Offset

×4

Tap 1 x 1 without Hole in Nozzle End

×13

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×16

Brick, Modified 1 x 1 with Studs on 4 Sides

×8

Brick, Modified 1 x 1 with Studs on 4 Sides

Container, Treasure Chest Bottom with Slots in Back

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Left

×2

Wedge, Plate 12 x 3 Right

Wedge, Plate 12 x 3 Right

×2

Container, Treasure Chest Lid Curved with Thick Hinge

Dish 2 x 2 Inverted (Radar)

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×14

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×2

Wedge 3 x 3 Sloped Right

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Panel 1 x 2 x 1 with Rounded Corners

Panel 1 x 2 x 1 with Rounded Corners

×4

Panel 1 x 2 x 1 with Rounded Corners

×6

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×4

Vehicle, Mudguard 3 x 3 x 1 with Arch Round

×6

Slope, Curved 1 x 1 x 2/3 Double

×13

Slope, Curved 1 x 1 x 2/3 Double

×4

Slope, Curved 1 x 1 x 2/3 Double

×2

Slope, Curved 1 x 1 x 2/3 Double

×2

Wedge, Plate 8 x 3 Pentagonal Right

×3

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

×3

Wedge, Plate 8 x 3 Pentagonal Left

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×5

Slope, Curved 3 x 1

×7

Brick, Modified 1 x 2 with Studs on 2 Sides

×4

Brick, Modified 1 x 2 with Studs on 2 Sides

×6

Barb / Claw / Horn / Tooth - Small

×13

Barb / Claw / Horn / Tooth - Small

×7

Barb / Claw / Horn / Tooth - Small

×6

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×6

Slope 30 1 x 1 x 2/3

×15

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×13

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Brick, Round 2 x 2 Dome Top

×3

Technic, Axle Connector Hub with 3 Axles

×5

Technic, Axle Connector Hub with 3 Axles

×12

Panel 1 x 6 x 5

Panel 1 x 6 x 5

×3

Arch 1 x 3 x 2 Curved Top

×6

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×6

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Round 4 x 4 with Hole

×2

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×12

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×4

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate, Modified 1 x 2 with Bar Handle on End

×6

Plate, Modified 1 x 2 with Bar Handle on End

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate 1 x 12

×7

Plate 1 x 12

Plate 1 x 12

×4

Slope 65 2 x 1 x 2

×3

Slope 65 2 x 1 x 2

Slope 65 2 x 1 x 2

×19

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Window 1 x 2 x 2 Flat Front

×3

Panel 1 x 4 x 5 Wall with Window

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×8

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×6

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Wedge, Plate 6 x 6 Cut Corner

×2

Wedge, Plate 6 x 6 Cut Corner

×6

Brick 1 x 10

×2

Brick 1 x 10

Brick 1 x 10

Brick 1 x 12

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×8

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Hinge Brick 2 x 2 Top Plate

×2

Turntable 4 x 4 Square Base, Locking

Slope, Curved 4 x 1

×16

Slope, Curved 4 x 1

×16

Tile, Modified 4 x 4 with Studs on Edge

Tile, Modified 4 x 4 with Studs on Edge

Tile, Modified 4 x 6 with Studs on Edges

×2

Arch 1 x 4 x 2

×2

Slope, Curved 1 x 4 x 1 1/3

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×6

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×9

Tile 1 x 3

Tile 1 x 3

×4

Tile 1 x 3

Tile 1 x 3

×6

Tile 1 x 3

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×30

Bar 6L with Stop Ring

Minifigure, Utensil Telescope

×41

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×3

Plate, Modified 4 x 4 with 2 x 2 Open Center

Plate, Modified 4 x 4 with 2 x 2 Open Center

Glass for Door Frame 1 x 6 x 7 Arched with Notches and Rounded Pillars

Rock 1 x 1 Jewel Octagonal

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×6

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×20

Technic, Brick 1 x 1 with Hole

Wedge, Plate 4 x 2 Right, Pointed

Wedge, Plate 4 x 2 Left, Pointed

Brick, Round 2 x 2 D. 45 degrees Elbow (25.5mm Standing Height)

×2

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

Bar 1L with Angled Hollow Stud

×3

Technic, Pin 3L with Friction Ridges

×9

Slope, Curved 4 x 1 x 2 2/3 with Stud

×2

Tile 1 x 6

×4

Tile 1 x 6

×3

Tile 1 x 6

×3

Tile, Round 2 x 4 Oval

Wedge 2 x 2 x 2/3 Pointed

×2

Tile 2 x 6

Arch 1 x 3 Inverted

×9

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×2

Minifigure, Utensil Candlestick / Candelabra

×2

Technic, Brick 1 x 1 with Axle Hole

×12

Technic, Brick 1 x 1 with Axle Hole

×12

Technic, Brick 1 x 1 with Axle Hole

×12

Technic, Brick 1 x 1 with Axle Hole

×3

Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder

×5

Bracket 1 x 1 - 1 x 2 Inverted

×4

Plate, Modified 2 x 3 with 1 x 1 Cutout

×2

Minifigure, Shield Circular / Round Convex Face with Silver, Gold, and Dark Brown Concentric Rings Pattern

Hose, Rigid 3mm D. 10L / 8.0cm

×2

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×2

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×6

Technic, Pin 3L without Friction Ridges with Stop

×2

Plate, Modified 1 x 2 with Clip on End (Vertical Grip)

×2

Bar 2L with Stop Ring

×12

Bar 2L with Stop Ring

×7

Plate 1 x 5

Plate 1 x 5

Wedge, Plate 6 x 2 Left

×3

Wedge, Plate 6 x 2 Left

Wedge, Plate 6 x 2 Right

×3

Wedge, Plate 6 x 2 Right

Arch 1 x 2 Inverted

Arch 1 x 2 Inverted

×5

Bracket 1 x 1 - 1 x 2

×22

Tile, Round Corner 3 x 3 Macaroni

×10

Minifigure, Utensil Cupcake Liner - Flat Top

×6

Slope, Curved 1 x 4 x 2/3 Double

×2

Elephant Tail / Trunk with Bar End - Long Straight Tip

×6

Arch 1 x 4 x 3

×2

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×6

Plate, Round 1 x 1 with Open Stud

×5

Plate, Round 1 x 1 with Open Stud

×3

Plate, Round 1 x 1 with Open Stud

×33

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

×5

Slope 30 1 x 2 x 2/3

×4

Slope 30 1 x 2 x 2/3

×6

Slope 30 1 x 2 x 2/3

Slope 30 1 x 2 x 2/3

×6

Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder

×8

Brick, Modified 1 x 1 x 2/3 with Open Stud

×6

Brick, Modified 1 x 1 x 2/3 with Open Stud

×2

Brick, Modified 1 x 1 x 2/3 with Open Stud

×16

Brick, Modified 1 x 1 x 2/3 with Open Stud

×7

Tile 2 x 4

×3

Tile 2 x 4

Tile 2 x 4

×4

Tile 2 x 4

×30

Tile 2 x 4

Tile 2 x 4

Tile 2 x 4

×2

Tile 2 x 4

×2

Brick, Round 4 x 4 with Hole

Technic, Axle 4L with Stop

×3

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×8

Brick, Modified 1 x 1 with Stud on Side

×2

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×3

Brick, Round Corner 6 x 6 x 2

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×6

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

×4

Brick, Modified Facet 2 x 2

×4

Brick, Modified Facet 2 x 2

×8

Bar 3L (Bar Arrow)

×2

Technic, Pin 1/2 with Friction Ridges

×3

Technic, Pin 1/2 with Friction Ridges

×3

Window 1 x 2 x 2 Castle

×2

Window 1 x 2 x 2 Castle

×6

Minifigure, Utensil Statuette / Trophy

×2

Plate 16 x 16

×2

Plate 16 x 16

Plate 2 x 14

×5

Plate 2 x 14

×2

Plate 8 x 16

Plate 8 x 16

×2

Windscreen 6 x 2 x 2 with Bar Handle

×3

Slope 45 2 x 1 with 2/3 Cutout

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope 45 2 x 1 with 2/3 Cutout

×31

Slope 45 2 x 1 with 2/3 Cutout

×4

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Arch 1 x 6 Raised Arch

Arch 1 x 6 Raised Arch

×2

Minifigure, Weapon Bow, Recurve with Round Limbs, Arrow Drawn

×2

Slope, Curved 4 x 1 x 2/3 Double

×4

Slope, Curved 4 x 1 x 2/3 Double

Bracket 1 x 2 - 2 x 4

×4

Bracket 1 x 2 - 2 x 4

Slope, Curved 4 x 2

×5

Arm Skeleton, Bent with Clips (Horizontal Grip)

×6

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×7

Brick, Modified 1 x 2 with Masonry Profile

×63

Pneumatic Hose Connector with Axle Connector

×15

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×15

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×10

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×4

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×5

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×7

Bracket 1 x 2 - 2 x 2 Inverted

Bracket 1 x 2 - 2 x 2 Inverted

Bracket 1 x 2 - 2 x 2 Inverted

×10

Bracket 1 x 2 - 2 x 2 Inverted

×21

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

Bracket 1 x 2 - 1 x 2

×4

Bracket 1 x 2 - 1 x 2

Frog

Common questions about Rivendell

Explore more