How much is LEGO Pigsy’s Noodle Tank (80026-1) worth?

Pigsy’s Noodle Tank sells for an average of $60.00 used and $81.72 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 80026-1?

This set includes 4 minifigures: Lee - Panda Costume ($3.00), Mr. Tang - Dark Red Legs ($2.81), Pan ($4.49), Pigsy - Medium Blue Utility Harness with Pig Head Buckle, Dark Tan Medium Legs with Pockets ($7.19). The minifigures have a combined BrickLink value of $17.49. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Pigsy’s Noodle Tank?

The minifigures make up about 29% of the set value ($17.49 out of $60.00). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Pigsy’s Noodle Tank (80026-1) retired?

Yes, Pigsy’s Noodle Tank was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Pigsy’s Noodle Tank set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Pigsy’s Noodle Tank

80026-1·Ninjago Dragons Rising·2021·4 minifigs·267 parts

Used Avg

$60.00

New Avg

$81.72

Add to your inventory Scan the minifigs

About Pigsy’s Noodle Tank

Pigsy’s Noodle Tank (80026-1) is a LEGO Ninjago Dragons Rising set released in 2021, currently averaging $60.00 used on BrickLink. It comes with 4 minifigures worth a combined $17.49. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 267 pieces.

Parts (267)

Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Technic, Axle 1L with Pin 2L with Friction Ridges

Minifigure Footgear Roller Skate

Plate, Round 4 x 4 with 2 x 2 Round Open Center

×2

Wedge 2 x 2 (Slope 45 Corner)

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

×2

Tile, Round 2 x 2 with Bottom Stud Holder with Fried Egg, Ramen Noodles and Vegetables Pattern

×2

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3

×5

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×3

Brick, Round 2 x 2 Dome Bottom

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×2

Plate, Round 1 x 1 with Vertical Swirl / Twist

×4

Minifigure, Headgear Mask Bear Rounded with Panda Black Eye Patches, Ears, Nose, and Mouth Pattern

Tile, Round 2 x 2 with Hole

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Modified 1 x 1 with Open O Clip

Projectile Launcher, 1 x 4 with Inside Clips (Disk Shooter)

Projectile Launcher Part, Rapid Shooter Trigger Small

Projectile Launcher Part, Rapid Shooter Six Barrel - Angled Barrels

Plate, Round Half 3 x 6 with 1 x 2 Cutout

×4

Tile, Round 2 x 2 with Open Stud

×6

Tile, Round 2 x 2 with Open Stud

×2

Tile, Round 2 x 2 with Open Stud

×2

Panel 3 x 4 x 3 Curved with Double Clip Hinge

Technic, Driving Ring Connector 3L

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Cherries / Cherry Pair

×2

Technic, Axle and Pin Connector Hub with 1L Axle

Bar 1 x 6 x 3 with 4 Studs

Brick 2 x 2 Corner

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Plate 2 x 2 Corner

×2

Slope, Curved 2 x 1 x 2/3 Inverted

×4

Tile, Round 1 x 1 Half Circle Extended

×3

Tile, Round 1 x 1 Half Circle Extended

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×2

Tile 1 x 4

×7

Egg with Small Pin Hole

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Plate 4 x 4 Corner

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Wedge, Plate 2 x 2 Cut Corner

×2

Tile 2 x 3

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×2

Technic, Brick 1 x 10 with Holes

×2

Turntable 2 x 2 Square Base

Tile, Round Corner 4 x 4 Macaroni

×4

Technic, Pin with Short Friction Ridges

×9

Tile, Round Corner 2 x 2 Macaroni

×4

Brick 2 x 2

×2

Brick 1 x 2

×2

Brick 1 x 1

×2

Brick 1 x 1

×4

Brick 1 x 1

×2

Brick 1 x 4

Slope, Curved 2 x 2 Double with 2 Hollow Studs

Plate 2 x 4

×2

Plate 2 x 4

Plate 2 x 3

×2

Plate 2 x 3

×2

Plate 2 x 2

×3

Plate 2 x 2

×9

Plate 1 x 2

×2

Plate 1 x 2

×7

Plate 1 x 2

×5

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 2

Plate 1 x 1

×3

Plate 1 x 1 with Black Curved Eyebrow Pattern

×3

Plate, Round Corner 3 x 3

×4

Plate, Round Corner 3 x 3

×4

Brick, Modified 1 x 4 with Studs on Side

×2

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

Tile 2 x 2

Tile 1 x 2

Tile 1 x 2 with Pigsy and Dark Orange Chinese Logogram '美味至上' (Supreme Delicious) Pattern

Tile 1 x 1

×4

Tile 1 x 1

×2

Technic, Plate 2 x 6 with 5 Holes

Technic, Pin 3/4

×2

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×4

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×2

Technic, Axle Connector with Axle Hole

×4

Technic, Axle 2L Notched

×22

Technic, Brick 1 x 2 with Axle Hole

×11

Technic, Brick 1 x 2 with Axle Hole

Technic, Axle 5L

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×2

Technic, Axle 5.5L with Stop

Technic, Liftarm, Modified Bent Thick 1 x 9 (7 - 3)

×2

Technic, Liftarm Thick 1 x 5

×2

Technic, Brick 4 x 4 Open Center

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Technic Ball Joint

Technic, Brick 4 x 6 Open Center

Technic, Pin 3L without Friction Ridges

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Slope 33 3 x 2

×2

Turkey Body (No Drumsticks), Type 1

Carrot / Club

Plant Stem with Bar (Carrot Top / Twig)

×3

Slope, Curved 3 x 1 x 2 with Hollow Stud

×2

Tile, Modified 2 x 2 with Studs on Edge

Minifigure, Utensil Bowl

×2

Plate, Round 1 x 2 with Open Studs

×3

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×2

Tire 37 x 14

Container, Box 2 x 2 x 1 - Top Opening with Flat Inner Bottom

Plate 1 x 3

×2

Turntable 2 x 2 Plate, Top

Turntable 2 x 2 Plate, Base

Bracket 1 x 1 - 1 x 1 Inverted

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 8 with Holes

×2

Technic, Axle 4L

×3

Technic, Axle 6L

×2

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×3

Plate 1 x 4

×2

Plate 1 x 4

Technic Bush

×7

Technic, Plate 2 x 8 with 7 Holes

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×2

Minifigure, Utensil Candle

Plate 2 x 6

×2

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Minifigure, Weapon Lance

Minifigure, Headgear Hat, Chef Toque

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×3

Cone 2 x 2 x 2 - Open Stud

Dish 8 x 8 Inverted (Radar) - Solid Studs

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 1 x 1

×13

Plate, Round 1 x 1

×13

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×6

Plate, Round 1 x 1

×2

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Turkey Drumstick, 22mm with Oval Opening on Back

×2

Technic, Axle 1L with Pin with Friction Ridges

×3

Dish 3 x 3 Inverted (Radar)

Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove

×2

Minifigure, Utensil Frying Pan

Minifigure, Utensil Saucepan

Brick, Round 1 x 1 with Fins

Cone 1 x 1 with Top Groove

×8

Cone 1 x 1 with Top Groove

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

×2

Bracket 3 x 2 - 2 x 2 Inverted (Space Seat)

×3

Tap 1 x 1 without Hole in Nozzle End

×2

Tap 1 x 1 without Hole in Nozzle End

×3

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Dish 2 x 2 Inverted (Radar)

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

×2

Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End

×2

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Brick, Round Corner 4 x 4 Macaroni with 3 Studs

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Socket

×2

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Vertical

×2

Panel 1 x 2 x 1 with Rounded Corners

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×5

Slope, Curved 3 x 1

×4

Wedge, Plate 2 x 4

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×4

Technic, Axle 8L with Stop

×3

Brick, Round 2 x 2 Dome Top

×4

Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends without Slots

×2

Technic, Link Tread Wide with 2 Pin Holes

×38

Technic Tread Sprocket Wheel Large

×2

Technic Tread Sprocket Wheel Small

×2

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×3

Plate, Round 4 x 4 with Hole

×3

Plate, Modified 1 x 2 with Bar Handle on End

×3

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×3

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Slope 18 2 x 1 x 2/3 with Grille

×2

Turntable 4 x 4 Square Base, Locking

Tile, Modified 4 x 4 with Studs on Edge

×2

Tile 1 x 3

×2

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Wedge 4 x 3 Triple Curved No Studs

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×2

Fish

×2

Brick, Round 4 x 4 x 2/3 Dome Top with Hole

×2

Brick, Round 4 x 4 x 2/3 Dome Top with Hole

×2

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×13

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Pin 3L with Friction Ridges

×4

Technic, Axle 3L with Stud

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×2

Tile, Round 2 x 4 Oval

Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder

×4

Plate, Modified 1 x 2 with Clip on End (Vertical Grip)

×5

Sticker Sheet for Set 80026 - (78932/6349742)

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3 with Dark Red Horizon Screen and Gold Switches and Buttons Pattern

Brick, Round 4 x 4 with Hole

×3

Technic, Axle 4L with Stop

×4

Brick, Modified 1 x 1 with Stud on Side

×3

Brick, Round Corner 6 x 6 x 2

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Bar 3L (Bar Arrow)

×2

Horn, Unicorn / Spiral

×5

Plate, Modified 10 x 10 Octagonal with Hole

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

Windscreen 6 x 2 x 2 with Bar Handle

×4

Propeller 3 Blade 5 Diameter

×2

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Slope, Curved 4 x 1 x 2/3 Double

Wedge 3 x 4 x 2/3 Triple Curved

Minifigure, Utensil Pitchfork - Handle with Flat End

Brick and Axle Separator

Tile, Round 1 x 1 with Soda Pop Can Top Pattern

×3

Tile, Round 1 x 1 with Egg Yolk Pattern

×2

Minifigure, Utensil Cleaver

Technic, Axle Connector Block Round with 2 Pin Holes and 3 Axle Holes (Hero Factory Weapon Barrel)

Vehicle, Spoiler with Bar Handle

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×5

Minifigure, Utensil Ingot 1 x 2

×3

Minifigure, Utensil Ingot 1 x 2

×2

Bracket 1 x 2 - 1 x 2 Inverted

×3

Pigsy’s Noodle Tank

About Pigsy’s Noodle Tank

Part-out value

Minifigures in Pigsy’s Noodle Tank (4)

Parts (267)

Common questions about Pigsy’s Noodle Tank

How much is LEGO Pigsy’s Noodle Tank (80026-1) worth?

What minifigures come in LEGO set 80026-1?

Is it worth parting out LEGO Pigsy’s Noodle Tank?

Is LEGO Pigsy’s Noodle Tank (80026-1) retired?

How do I check if my Pigsy’s Noodle Tank set is complete?

More Ninjago Dragons Rising sets

Explore more

Company

Legal