brick'em
Wiggler's Poison Swamp - Expansion Set

Wiggler's Poison Swamp - Expansion Set

71383-1·Super Mario·2021·3 minifigs·94 parts

Used Avg
$26.41
New Avg
$33.23
Add to your inventoryScan the minifigs

About Wiggler's Poison Swamp - Expansion Set

Wiggler's Poison Swamp - Expansion Set (71383-1) is a LEGO Super Mario set from 2021 that sells for around $26.41 used on BrickLink. It includes 3 minifigures with a combined resale value of $20.58 — that's 78% of the set's price in figures alone. The most valuable is Wiggler - Plate, Modified with Bar Arm Connections at $14.72. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

Minifig value: $20.58 out of $26.41 total (78%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Minifigures in Wiggler's Poison Swamp - Expansion Set (3)

Koopa Troopa, Paratroopa - Scanner Code with Yellow Lines
Koopa Troopa, Paratroopa - Scanner Code with Yellow Lines
mar0043$3.88
Goomba (Dark Bluish Gray Interior Pieces) - Angry, Looking Left
Goomba (Dark Bluish Gray Interior Pieces) - Angry, Looking Left
mar0051$1.97
Wiggler - Plate, Modified with Bar Arm Connections
Wiggler - Plate, Modified with Bar Arm Connections
mar0052$14.72

Parts (94)

Plant Leaves 6 x 5 Swordleaf with Open O Clip Thick
Plant Leaves 6 x 5 Swordleaf with Open O Clip Thick
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
×2
Plate, Modified 1 x 2 with Tow Ball on Side
Plate, Modified 1 x 2 with Tow Ball on Side
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder
×3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×2
Plate, Modified 1 x 2 with Tow Ball on End
Plate, Modified 1 x 2 with Tow Ball on End
×2
Arch 1 x 5 x 4 - Continuous Bow
Arch 1 x 5 x 4 - Continuous Bow
Brick 2 x 2 Corner
Brick 2 x 2 Corner
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Tile 1 x 4
Tile 1 x 4
×2
Plate 2 x 12
Plate 2 x 12
×2
Plate, Round 1 x 1 with Flower Edge (5 Petals)
Plate, Round 1 x 1 with Flower Edge (5 Petals)
×12
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×5
Tile 2 x 3
Tile 2 x 3
×2
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
×4
Brick 2 x 4
Brick 2 x 4
Brick 1 x 2
Brick 1 x 2
×4
Brick 1 x 2 with Yellow Star with Black Eyes Pattern
Brick 1 x 2 with Yellow Star with Black Eyes Pattern
×2
Brick 1 x 1
Brick 1 x 1
Brick 1 x 4
Brick 1 x 4
Plate 2 x 4
Plate 2 x 4
×5
Plate 2 x 4
Plate 2 x 4
×4
Plate 2 x 4
Plate 2 x 4
×4
Plate 2 x 4
Plate 2 x 4
Plate 2 x 3
Plate 2 x 3
×3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 2
Plate 2 x 2
×4
Plate 2 x 2
Plate 2 x 2
Plate 1 x 2
Plate 1 x 2
×7
Plate 1 x 2
Plate 1 x 2
×2
Plate 4 x 4
Plate 4 x 4
×5
Plate 4 x 6
Plate 4 x 6
Plate 2 x 8
Plate 2 x 8
×6
Slope 45 2 x 2
Slope 45 2 x 2
×3
Panel 1 x 4 x 1
Panel 1 x 4 x 1
Tile 2 x 2 with Super Mario Scanner Code Super Star Block Pattern (Sticker) - Sets 30389 / 71367 / 71377 / 71383 / 71388 / 71400 / 71419 / 71435 / 71437 / 71441
Tile 2 x 2 with Super Mario Scanner Code Super Star Block Pattern (Sticker) - Sets 30389 / 71367 / 71377 / 71383 / 71388 / 71400 / 71419 / 71435 / 71437 / 71441
Tile 2 x 2 with Super Mario Scanner Code Double Arrows Pattern (Sticker) - Set 71383
Tile 2 x 2 with Super Mario Scanner Code Double Arrows Pattern (Sticker) - Set 71383
Tile 1 x 2
Tile 1 x 2
×7
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
Technic, Liftarm Thick 1 x 5
Technic, Liftarm Thick 1 x 5
Plant Flower with Bar and Small Pin Hole
Plant Flower with Bar and Small Pin Hole
Plant Plate, Round 1 x 1 with 3 Layered Leaves
Plant Plate, Round 1 x 1 with 3 Layered Leaves
×3
Tile, Modified 2 x 2 with Studs on Edge
Tile, Modified 2 x 2 with Studs on Edge
×3
Plate 1 x 8
Plate 1 x 8
×2
Plate, Round 4 x 4 Gear 10 Tooth
Plate, Round 4 x 4 Gear 10 Tooth
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
×2
Brick 1 x 3
Brick 1 x 3
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
Plate 1 x 6
Plate 1 x 6
×2
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×6
Turntable 2 x 2 Plate, Top
Turntable 2 x 2 Plate, Top
Turntable 2 x 2 Plate, Base
Turntable 2 x 2 Plate, Base
Slope, Curved 1 x 2 with Bottom Stud Holder
Slope, Curved 1 x 2 with Bottom Stud Holder
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×6
Antenna 4H - Flat Top
Antenna 4H - Flat Top
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×3
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Tile 1 x 8
Tile 1 x 8
×4
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom
×6
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×2
Plate 1 x 10
Plate 1 x 10
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Bar   1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Slope, Curved 1 x 1 x 2/3 Double
Slope, Curved 1 x 1 x 2/3 Double
×8
Technic, Liftarm, Modified Ball Joint Angled 1 x 2
Technic, Liftarm, Modified Ball Joint Angled 1 x 2
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×2
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
Turntable 4 x 4 Square Base, Locking
Turntable 4 x 4 Square Base, Locking
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Tile 1 x 3
Tile 1 x 3
×2
Tile 1 x 3
Tile 1 x 3
Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
×2
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
×4
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with Super Mario Scanner Code Raft Pattern (Sticker) - Set 71383
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with Super Mario Scanner Code Raft Pattern (Sticker) - Set 71383
Tile, Round 2 x 4 Oval
Tile, Round 2 x 4 Oval
×3
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
×2
Plate, Round 4 x 8 x 2/3, Raised 2 x 8 and 2 x 2 Cutout
Plate, Round 4 x 8 x 2/3, Raised 2 x 8 and 2 x 2 Cutout
×3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×3
Tile 2 x 4
Tile 2 x 4
×3
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×2
Tile 8 x 16 with Bottom Tubes, Textured Surface
Tile 8 x 16 with Bottom Tubes, Textured Surface
×2
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Brick, Modified 1 x 2 with Masonry Profile
Brick, Modified 1 x 2 with Masonry Profile
×4
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted
×2

Common questions about Wiggler's Poison Swamp - Expansion Set

How much is LEGO Wiggler's Poison Swamp - Expansion Set (71383-1) worth?

Wiggler's Poison Swamp - Expansion Set sells for an average of $26.41 used and $33.23 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 71383-1?

This set includes 3 minifigures: Koopa Troopa, Paratroopa - Scanner Code with Yellow Lines ($3.88), Goomba (Dark Bluish Gray Interior Pieces) - Angry, Looking Left ($1.97), Wiggler - Plate, Modified with Bar Arm Connections ($14.72). The minifigures have a combined BrickLink value of $20.58. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Wiggler's Poison Swamp - Expansion Set?

The minifigures alone are worth $20.58 (78% of the $26.41 set price), so parting out the figs individually on BrickLink can be profitable. Start with Wiggler - Plate, Modified with Bar Arm Connections at $14.72 — it's the highest-value figure in the set.

Is LEGO Wiggler's Poison Swamp - Expansion Set (71383-1) retired?

Yes, Wiggler's Poison Swamp - Expansion Set was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Wiggler's Poison Swamp - Expansion Set set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Super Mario setsSuper Mario minifiguresMost valuable Super Mario figsFree scanner