brick'em
T-6 Jedi Shuttle

T-6 Jedi Shuttle

7931-1·Star Wars·2011·4 minifigs·106 parts

Used Avg
$91.12
New Avg
$243.04
Add to your inventoryScan the minifigs

About T-6 Jedi Shuttle

T-6 Jedi Shuttle (7931-1) is a LEGO Star Wars set from 2011 that sells for around $91.12 used on BrickLink. It includes 4 minifigures with a combined resale value of $62.85 — that's 69% of the set's price in figures alone. The most valuable is Shaak Ti at $40.36. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

Minifig value: $62.85 out of $91.12 total (69%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • Sealed copies sell for $243.04 vs $91.12 used — a 167% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Shaak Ti ($40.36) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2011). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in T-6 Jedi Shuttle (4)

Anakin Skywalker - Large Eyes, Reddish Brown Arms
Anakin Skywalker - Large Eyes, Reddish Brown Arms
sw0183$4.98
Obi-Wan Kenobi - Clone Wars, Large Eyes
Obi-Wan Kenobi - Clone Wars, Large Eyes
sw0197$6.38
Saesee Tiin
Saesee Tiin
sw0308$11.12
Shaak Ti
Shaak Ti
sw0309$40.36

Parts (106)

Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×3
Plate 2 x 12
Plate 2 x 12
×6
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 3 Cut Corner
×4
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×2
Technic, Disk 3 x 3
Technic, Disk 3 x 3
Technic, Brick 1 x 10 with Holes
Technic, Brick 1 x 10 with Holes
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×7
Technic Turntable 56 Tooth Extended Arms, Top
Technic Turntable 56 Tooth Extended Arms, Top
Technic Turntable 56 Tooth Extended Arms, Base
Technic Turntable 56 Tooth Extended Arms, Base
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×10
Brick 2 x 4
Brick 2 x 4
×2
Brick 2 x 3
Brick 2 x 3
Brick 2 x 2
Brick 2 x 2
×4
Brick 1 x 2
Brick 1 x 2
×6
Brick 1 x 1
Brick 1 x 1
×4
Brick 1 x 1
Brick 1 x 1
×8
Brick 2 x 8
Brick 2 x 8
Brick 1 x 6
Brick 1 x 6
×2
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
×4
Plate 2 x 4
Plate 2 x 4
×8
Plate 2 x 3
Plate 2 x 3
×8
Plate 1 x 2
Plate 1 x 2
×7
Plate 1 x 2
Plate 1 x 2
×8
Plate 1 x 2
Plate 1 x 2
×8
Plate 4 x 12
Plate 4 x 12
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 4
Plate 4 x 4
×3
Plate 2 x 8
Plate 2 x 8
×2
Plate 4 x 8
Plate 4 x 8
Wedge, Plate 12 x 6 Left
Wedge, Plate 12 x 6 Left
Wedge, Plate 12 x 6 Right
Wedge, Plate 12 x 6 Right
Plate 6 x 8
Plate 6 x 8
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×3
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Slope 45 2 x 2
Slope 45 2 x 2
×3
Slope 45 2 x 1
Slope 45 2 x 1
×2
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×12
Slope 45 2 x 1 Triple with Inside Bar
Slope 45 2 x 1 Triple with Inside Bar
×2
Wedge, Plate 4 x 4 Cut Corner
Wedge, Plate 4 x 4 Cut Corner
×14
Wedge, Plate 8 x 8 Cut Corner
Wedge, Plate 8 x 8 Cut Corner
×2
Brick, Modified 1 x 2 with Pins
Brick, Modified 1 x 2 with Pins
Brick, Round  1 x 1
Brick, Round 1 x 1
×2
Tile 2 x 2
Tile 2 x 2
×3
Tile 1 x 2
Tile 1 x 2
×5
Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern
Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
Technic, Pin 3L with Friction Ridges and Stop Bush
Technic, Pin 3L with Friction Ridges and Stop Bush
×5
Technic, Axle  5L
Technic, Axle 5L
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
×2
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 3
×2
Plate 1 x 3
Plate 1 x 3
×2
Technic, Gear 8 Tooth
Technic, Gear 8 Tooth
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×2
Plate 1 x 6
Plate 1 x 6
×10
Slope 65 2 x 2 x 2 with Bottom Tube
Slope 65 2 x 2 x 2 with Bottom Tube
×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×5
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×3
Technic, Axle  4L
Technic, Axle 4L
Plate 1 x 4
Plate 1 x 4
×4
Plate 1 x 4
Plate 1 x 4
×13
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
×4
Plate 2 x 6
Plate 2 x 6
×5
Technic, Brick 1 x 12 with Holes
Technic, Brick 1 x 12 with Holes
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×3
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×17
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×2
Technic Bush 1/2 Smooth
Technic Bush 1/2 Smooth
×2
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
Engine, Large
Engine, Large
×3
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
×2
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
×4
Plate 1 x 10
Plate 1 x 10
×3
Technic, Axle  3L
Technic, Axle 3L
Windscreen 10 x 6 x 2 Curved with Frame Pattern
Windscreen 10 x 6 x 2 Curved with Frame Pattern
Cockpit 10 x 6 x 2 Curved
Cockpit 10 x 6 x 2 Curved
Wedge, Plate 3 x 4 with Stud Notches
Wedge, Plate 3 x 4 with Stud Notches
×3
Wedge, Plate 8 x 3 Pentagonal Right
Wedge, Plate 8 x 3 Pentagonal Right
×2
Wedge, Plate 8 x 3 Pentagonal Left
Wedge, Plate 8 x 3 Pentagonal Left
×2
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×8
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×2
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
Technic, Axle  8L with Stop
Technic, Axle 8L with Stop
×2
Arch 1 x 3 x 2 Curved Top
Arch 1 x 3 x 2 Curved Top
×4
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×2
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×2
Technic, Liftarm, Modified T-Shape Thick 3 x 3
Technic, Liftarm, Modified T-Shape Thick 3 x 3
×2
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
×2
Tile, Modified 6 x 12 with Studs on Edges
Tile, Modified 6 x 12 with Studs on Edges
×2
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
×4
Tile, Modified 4 x 6 with Studs on Edges
Tile, Modified 4 x 6 with Studs on Edges
×4
Arch 1 x 6 x 2 Curved Top
Arch 1 x 6 x 2 Curved Top
×10
Brick, Modified 2 x 2 with Pin and Axle Hole
Brick, Modified 2 x 2 with Pin and Axle Hole
×5
Tile 1 x 3
Tile 1 x 3
×2
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
×4
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
×4
Tile 1 x 6
Tile 1 x 6
×6
Sticker Sheet for Set 7931 - (4610894/93580)
Sticker Sheet for Set 7931 - (4610894/93580)
Tile 2 x 4
Tile 2 x 4
×6
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
×6

Common questions about T-6 Jedi Shuttle

How much is LEGO T-6 Jedi Shuttle (7931-1) worth?

T-6 Jedi Shuttle sells for an average of $91.12 used and $243.04 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7931-1?

This set includes 4 minifigures: Anakin Skywalker - Large Eyes, Reddish Brown Arms ($4.98), Obi-Wan Kenobi - Clone Wars, Large Eyes ($6.38), Saesee Tiin ($11.12), Shaak Ti ($40.36). The minifigures have a combined BrickLink value of $62.85. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO T-6 Jedi Shuttle?

The minifigures alone are worth $62.85 (69% of the $91.12 set price), so parting out the figs individually on BrickLink can be profitable. Start with Shaak Ti at $40.36 — it's the highest-value figure in the set.

Is LEGO T-6 Jedi Shuttle (7931-1) retired?

Yes, T-6 Jedi Shuttle was released in 2011 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my T-6 Jedi Shuttle set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner