How accurate is the brick'em scanner?

brick'em is trained on 18,600+ minifigures using BrickLink's complete catalog. You get the exact BrickLink ID, name, and market price for every figure scanned.

Do I need a credit card to start?

No. Start your 14-day free trial with no payment due today. Cancel anytime during the trial and you won't be charged.

What platforms can I export to?

Whatnot, eBay, BrickLink, Shopify, BrickStore, and generic CSV. Each export is formatted specifically for that platform so you can bulk upload immediately.

Is brick'em just for minifigures?

No. brick'em identifies both minifigures and individual parts. The parts scanner identifies pieces by color and looks up prices per variant.

Can I cancel anytime?

Yes. Cancel or downgrade from your settings page. No contracts, no cancellation fees, no questions asked.

I already have a system that works. Why switch?

If your current process handles 200+ figures a week without eating your weekends, keep it. But if you're spending hours on manual lookups, brick'em does the same work in minutes. Most sellers try the 14-day free trial and never go back.

TIE Fighter with Imperial Hangar Rack

40771-1·Star Wars·2025·3 minifigs·76 parts

Used Avg

$118.07

New Avg

$166.01

Add to your inventory Scan the minifigs

About TIE Fighter with Imperial Hangar Rack

TIE Fighter with Imperial Hangar Rack (40771-1) is a LEGO Star Wars set released in 2025, currently averaging $118.07 used on BrickLink. It comes with 3 minifigures worth a combined $23.98. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 76 pieces.

Part-out value

The minifigures make up only 20% of this set's value ($23.98 out of $118.07). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Minifigures in TIE Fighter with Imperial Hangar Rack (3)

Imperial Stormtrooper - Male, Dual Molded Helmet with Light Bluish Gray Panels on Back, Shoulder Belts, Medium Nougat Head

sw1455$4.74

Imperial Stormtrooper - Female, Dual Molded Helmet with Light Bluish Gray Panels on Back, Shoulder Belts, Light Nougat Head

sw1456$5.16

Imperial TIE Fighter Pilot - Medium Tan Head

sw1484$14.09

Parts (76)

Plate, Round 6 x 6 with Hole

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Plate, Round 1 x 2 Half with 1 Stud (Jumper)

×4

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Round 2 x 2 with Open Stud

×2

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×16

Tile 1 x 4

Plate, Modified 2 x 2 with Pin on Bottom

×2

Tile, Round 1 x 1 Quarter

×5

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×4

Technic, Brick 1 x 10 with Holes

Technic, Pin with Short Friction Ridges

×9

Slope 45 2 x 1 with Cutout without Stud

×4

Container, Box 2 x 2 x 1 - Top Opening with Raised Inner Bottom with Dark Bluish Gray SW Imperial Logo and Aurebesh Characters 'CARGO' Pattern

×2

Plate 2 x 2

×4

Plate 1 x 2

×4

Plate 1 x 2

×2

Plate 4 x 12

×2

Plate 4 x 6

Bar 4L (Lightsaber Blade / Wand)

×8

Tile 1 x 2 with SW Dark Red Target Screen, Dark Red and Silver Buttons Pattern

Tile 1 x 1

×2

Technic, Brick 1 x 2 with Holes

Technic, Brick 4 x 4 Open Center

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×5

Slope 33 2 x 2 Double

×6

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×4

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×8

Tile, Modified 2 x 2 with Studs on Edge

Dish 4 x 4 Inverted (Radar) with Open Stud with Silver Radial TIE Bomber / Fighter Cockpit Pattern

Plate, Round 1 x 2 with Open Studs

Plate 1 x 3

×4

Arch 1 x 4

×2

Plate 1 x 6

×4

Technic, Pin without Friction Ridges

×5

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Minifigure, Utensil Tea Saucer with Hollow Stud

×3

Technic, Brick 1 x 6 with Holes

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

×6

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×2

Bar 1 x 4 x 2 with Open Studs

Dish 3 x 3 Inverted (Radar)

Dish 6 x 6 Inverted (Radar) - Solid Studs

×2

Bracket 1 x 2 - 2 x 2

×4

Wedge, Plate 2 x 4

Wedge, Plate 6 x 3 Right

×4

Wedge, Plate 6 x 3 Left

×4

Brick, Round 2 x 2 Dome Top

×2

Minifigure, Weapon Gun, Blaster SW Standard

×2

Plate, Round 4 x 4 with Hole

Slope 18 2 x 1 x 2/3 with Grille

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Link 1 x 9 Bent (6 - 4)

×2

Technic, Pin 3L with Friction Ridges

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

Plate, Round Corner 3 x 3 with 2 x 2 Curved Cutout

×8

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×2

Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder

×4

Plate 3 x 3 Corner

×4

Slope 30 1 x 2 x 2/3

×2

Tile 2 x 4

×3

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Minifigure, Weapon Whip Bent Flexible

×3

Technic, Pin 1/2 with Friction Ridges

×7

Minifigure, Weapon Gun, Blaster SW Small with Scope

×2

Tile, Round 1 x 1 with SW Thermal Detonator with Red Button Pattern

×3

Minifigure, Utensil Ingot 1 x 2

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×2

Common questions about TIE Fighter with Imperial Hangar Rack

How much is LEGO TIE Fighter with Imperial Hangar Rack (40771-1) worth?

TIE Fighter with Imperial Hangar Rack sells for an average of $118.07 used and $166.01 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 40771-1?

This set includes 3 minifigures: Imperial Stormtrooper - Male, Dual Molded Helmet with Light Bluish Gray Panels on Back, Shoulder Belts, Medium Nougat Head ($4.74), Imperial Stormtrooper - Female, Dual Molded Helmet with Light Bluish Gray Panels on Back, Shoulder Belts, Light Nougat Head ($5.16), Imperial TIE Fighter Pilot - Medium Tan Head ($14.09). The minifigures have a combined BrickLink value of $23.98. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO TIE Fighter with Imperial Hangar Rack?

The minifigures make up about 20% of the set value ($23.98 out of $118.07). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO TIE Fighter with Imperial Hangar Rack (40771-1) retired?

TIE Fighter with Imperial Hangar Rack was released in 2025. It should still be widely available at retail from LEGO and authorized retailers.

How do I check if my TIE Fighter with Imperial Hangar Rack set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars sets Star Wars minifigures Most valuable Star Wars figs Free scanner