How much is LEGO Republic Gunship - UCS (75309-1) worth?

Republic Gunship - UCS sells for an average of $339.84 used and $457.11 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75309-1?

This set includes 2 minifigures: Clone Trooper Commander (Phase 1) - Bright Light Orange Arms, Nougat Head ($6.43), Mace Windu (Dark Tan Legs, Open Mouth) ($15.22). The minifigures have a combined BrickLink value of $21.65. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Republic Gunship - UCS?

The minifigures make up about 6% of the set value ($21.65 out of $339.84). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Republic Gunship - UCS (75309-1) retired?

Yes, Republic Gunship - UCS was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Republic Gunship - UCS set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Republic Gunship - UCS

75309-1·Star Wars·2021·2 minifigs·529 parts

Used Avg

$339.84

New Avg

$457.11

Add to your inventory Scan the minifigs

About Republic Gunship - UCS

Republic Gunship - UCS (75309-1) is a LEGO Star Wars set released in 2021, currently averaging $339.84 used on BrickLink. It comes with 2 minifigures worth a combined $21.65. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 529 pieces.

Parts (529)

Tile 6 x 6 with Bottom Tubes, Textured Surface

×10

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×12

Windscreen 10 x 6 x 3 Bubble Canopy Double Tapered with Square Front Cutout with Dark Red, Black and Light Bluish Gray Republic Gunship Cockpit Frame Pattern

Windscreen 10 x 6 x 3 Bubble Canopy Double Tapered with Square Front Cutout with Dark Red, Black and Light Bluish Gray Republic Gunship Dual Cockpit Frame Pattern

Tile, Modified 2 x 2 Inverted

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Plate 3 x 3

×6

Plate 3 x 3

×6

Plate 3 x 3

×6

Technic, Axle 1L with Pin 2L with Friction Ridges

×8

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 4 x 1 Inverted

×4

Slope, Curved 4 x 1 Inverted

×2

Brick 1 x 1 x 3

×2

Tile 2 x 2 Corner

×16

Tile 2 x 2 Corner

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×4

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×14

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

×10

Technic, Pin with Friction Ridges and Pin Hole

×8

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×3

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×2

Tile, Round 2 x 2 with Hole

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×6

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Plate, Round Half 3 x 6 with 1 x 2 Cutout

Arch 1 x 3 x 2 Inverted

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×28

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×4

Tile, Round 2 x 2 with Open Stud

×2

Plate, Modified 1 x 2 with Pin Hole on Bottom

×4

Plate, Modified 1 x 2 with Pin Hole on Bottom

×12

Plate, Modified 1 x 2 with Pin Hole on Bottom

×6

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×14

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

×4

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×8

Panel 1 x 3 x 1

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×7

Tile, Modified 1 x 2 Grille with Bottom Groove

×20

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Plate 2 x 2 Corner

×8

Plate 2 x 2 Corner

×8

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×8

Slope, Curved 2 x 1 x 2/3 Inverted

×12

Slope, Curved 2 x 1 x 2/3 Inverted

×2

Wedge, Plate 2 x 2 Left

×13

Wedge, Plate 2 x 2 Left

×2

Wedge, Plate 2 x 2 Left

×2

Wedge, Plate 2 x 2 Right

×13

Wedge, Plate 2 x 2 Right

×2

Wedge, Plate 2 x 2 Right

×2

Slope, Curved 3 x 2

×4

Tile 1 x 4

×12

Tile 1 x 4

×4

Tile 1 x 4

×5

Tile 1 x 4

×9

Tile 1 x 4

×2

Tile 1 x 4

×10

Tile, Modified 1 x 2 with Bar Handle

×2

Plate 2 x 12

×8

Plate 2 x 12

×8

Slope, Inverted 75 2 x 1 x 3

×2

Slope, Inverted 75 2 x 1 x 3

×8

Wedge, Plate 3 x 3 Cut Corner

×8

Wedge, Plate 3 x 3 Cut Corner

×2

Wedge, Plate 3 x 3 Cut Corner

×4

Wedge, Plate 3 x 3 Cut Corner

×2

Wedge, Plate 3 x 3 Cut Corner

×12

Brick 2 x 6

×2

Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout

×4

Brick 1 x 16

×4

Brick 1 x 16

×2

Bar 1 x 8 x 2

×4

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×4

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 1 x 1 with Bar Handle

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×23

Wedge, Plate 2 x 2 Cut Corner

×4

Wedge, Plate 2 x 2 Cut Corner

×6

Wedge, Plate 2 x 2 Cut Corner

×6

Tile 2 x 3

×21

Tile 2 x 3

×6

Bar 8L with Stop Rings and Pin (Technic, Figure Accessory Ski Pole) - Flat End

×2

Tile, Modified Facet 2 x 2

×8

Technic Slope 6 x 1 x 1 2/3

×4

Technic, Pin with Short Friction Ridges

×142

Tile, Round Corner 2 x 2 Macaroni

×2

Plate, Modified 2 x 2 with Pin Holes

Brick, Modified 1 x 2 with Grille / Fluted Profile

×4

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×10

Wedge 2 x 1 x 2/3 Right

×5

Wedge 2 x 1 x 2/3 Left

×5

Brick 2 x 4

×3

Brick 2 x 4

×5

Brick 2 x 3

×4

Brick 2 x 3

×6

Brick 2 x 2

×2

Brick 2 x 2

×5

Brick 2 x 2

×3

Brick 2 x 2

×4

Brick 2 x 2

×9

Brick 1 x 2

×12

Brick 1 x 2

×4

Brick 1 x 2

×2

Brick 1 x 2

×4

Brick 1 x 1

×6

Brick 1 x 1

×2

Brick 1 x 8

×2

Brick 1 x 8

×2

Brick 1 x 8

×2

Brick 1 x 6

×4

Brick 1 x 6

×2

Brick 1 x 6

×10

Brick 1 x 4

×4

Brick 1 x 4

Slope, Curved 2 x 2 Double with 2 Hollow Studs

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

×2

Plate 2 x 4

×10

Plate 2 x 4

×8

Plate 2 x 4

×4

Plate 2 x 4

×5

Plate 2 x 4

×2

Plate 2 x 4

×4

Plate 2 x 4

×32

Plate 2 x 3

×16

Plate 2 x 3

×18

Plate 2 x 3

×2

Plate 2 x 3

×7

Plate 2 x 2

×11

Plate 2 x 2

×15

Plate 2 x 2

×25

Plate 2 x 2

×3

Plate 2 x 2

×12

Plate 2 x 2

×2

Plate 1 x 2

×68

Plate 1 x 2

×10

Plate 1 x 2

×3

Plate 1 x 2

×16

Plate 1 x 2

×6

Plate 1 x 2

×4

Plate 1 x 2

×12

Plate 1 x 2

×10

Plate 1 x 2

×12

Plate 1 x 1

×37

Plate 1 x 1

×13

Plate 1 x 1

×15

Plate 4 x 12

×24

Plate 4 x 12

×9

Plate 4 x 10

×4

Plate 4 x 10

×2

Plate 4 x 4

×6

Plate 4 x 4

×4

Plate 4 x 6

×8

Plate 4 x 6

×2

Plate 4 x 6

×5

Plate 6 x 10

×2

Plate 2 x 8

×12

Plate 2 x 8

×4

Plate 2 x 8

×13

Plate 2 x 8

×4

Plate 4 x 8

×5

Tile, Modified 2 x 3 with 2 Open O Clips

×8

Wedge, Plate 12 x 6 Left

Wedge, Plate 12 x 6 Right

Plate 6 x 8

×2

Plate 6 x 8

×2

Slope 45 2 x 4

×2

Bar 4L (Lightsaber Blade / Wand)

×12

Bar 4L (Lightsaber Blade / Wand)

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×8

Slope 45 2 x 2

×2

Slope 45 2 x 1

×14

Brick, Modified 1 x 4 with Studs on Side

×4

Wedge, Plate 4 x 4 Cut Corner

×6

Wedge 3 x 3 Facet

×2

Tile 2 x 2

×9

Tile 2 x 2

×3

Tile 2 x 2

×2

Tile 2 x 2

×10

Tile 1 x 2

×48

Tile 1 x 2

×6

Tile 1 x 2

×8

Tile 1 x 1

×23

Tile 1 x 1

×3

Tile 1 x 1

×3

Tile 1 x 1

×8

Technic, Brick 1 x 2 with Holes

×6

Technic, Brick 1 x 2 with Holes

×4

Technic, Pin 3/4

×13

Technic, Brick 1 x 14 with Holes

×4

Plate, Modified 1 x 2 with Door Rail

×16

Plate, Modified 1 x 2 with Door Rail

×3

Plate, Modified 1 x 2 with Door Rail

×3

Technic, Pin 3L with Friction Ridges and Stop Bush

×5

Technic, Pin 3L with Friction Ridges and Stop Bush

×5

Technic, Pin 3L with Friction Ridges and Stop Bush

×17

Wedge, Plate 4 x 6 Cut Corners

×2

Technic, Axle 2L Notched

×2

Technic, Liftarm Thick 1 x 15

×2

Technic, Axle and Pin Connector Perpendicular Double

×2

Technic, Liftarm Thick 1 x 5

×3

Technic, Liftarm Thick 1 x 5

×2

Brick 1 x 2 x 2 with Inside Stud Holder

Technic, Liftarm Thick 1 x 3

×6

Technic, Liftarm Thick 1 x 7

×4

Technic, Liftarm Thick 1 x 11

×6

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×4

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×4

Slope, Curved 2 x 2 x 2/3 Inverted

×10

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×8

Slope 33 3 x 4

×4

Slope 33 3 x 2

×2

Slope, Curved 3 x 1 x 2 with Hollow Stud

×2

Tile, Modified 2 x 2 with Studs on Edge

×12

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Plate 1 x 8

×6

Plate 1 x 8

×10

Plate 1 x 8

×2

Technic Driving Ring Extension with 8 Teeth Inside and Outside

×2

Technic Driving Ring Extension with 8 Teeth Inside and Outside

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×10

Tile, Modified 2 x 2 Triangular

×2

Tile, Modified 2 x 2 Triangular

×2

Tile, Modified 2 x 2 Triangular

×4

Tile, Modified 2 x 2 Triangular

×2

Brick 1 x 3

×6

Brick 1 x 3

×2

Brick 1 x 3

×2

Plate 1 x 3

×18

Plate 1 x 3

×4

Plate 1 x 3

×2

Plate 1 x 3

×10

Plate 1 x 3

×18

Slope, Inverted 45 2 x 1

×8

Plate 1 x 6

×20

Plate 1 x 6

×2

Plate 1 x 6

×3

Plate 1 x 6

×4

Plate 1 x 6

×3

Plate 1 x 6

×5

Plate 1 x 6

×4

Slope 65 2 x 2 x 2 with Bottom Tube

Bracket 1 x 1 - 1 x 1 Inverted

×2

Bracket 1 x 1 - 1 x 1

×4

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×14

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×4

Technic, Brick 1 x 8 with Holes

×12

Technic, Brick 1 x 16 with Holes

×2

Technic, Brick 1 x 16 with Holes

×6

Technic, Axle 4L

×3

Technic, Axle 6L

Technic, Axle 12L

×2

Technic, Plate 2 x 4 with 3 Holes

×4

Plate 1 x 4

×41

Plate 1 x 4

×6

Plate 1 x 4

×18

Plate 1 x 4

×19

Slope, Curved 1 x 2 with Bottom Stud Holder

×10

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×6

Plate 2 x 6

×7

Plate 2 x 6

×4

Plate 2 x 6

×7

Plate 2 x 6

×11

Plate 2 x 6

×2

Plate 2 x 6

×9

Plate 2 x 10

×10

Plate 2 x 10

×5

Plate 2 x 10

×4

Plate 2 x 10

×4

Technic, Brick 1 x 6 with Holes

×6

Technic, Brick 1 x 6 with Holes

×6

Technic, Brick 1 x 12 with Holes

×2

Technic, Brick 1 x 12 with Holes

Hinge Brick 1 x 2 Base

×4

Hinge Brick 1 x 2 Base

×12

Hinge Brick 1 x 2 Base

×4

Hinge Brick 1 x 2 Base

×2

Hinge Brick 1 x 2 Top Plate

×4

Support 2 x 2 x 2 Stand with Complete Hole

Brick, Round 2 x 2 with Axle Hole

×14

Brick, Round 2 x 2 with Axle Hole

Bracket 2 x 2 - 2 x 2 with 2 Holes

Plate 6 x 6

×2

Technic, Brick 2 x 4 with 3 Axle Holes

×2

Plate, Round 2 x 2 with Axle Hole

×2

Brick, Modified 1 x 1 with Headlight

×10

Plate, Round 1 x 1

×13

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Tile 1 x 8

×8

Tile 1 x 8

×8

Tile 1 x 8

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×6

Plate, Modified 1 x 4 with 2 Studs with Groove

Wedge, Plate 4 x 2 Right

×2

Wedge, Plate 4 x 2 Left

×2

Technic Wedge Belt Wheel (Pulley)

×2

Plate, Modified 2 x 2 with Vents

×2

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Technic Bush 1/2 Smooth

×5

Technic, Pin 1/2 without Friction Ridges

×21

Plate 2 x 16

×18

Plate 2 x 16

×2

Plate 2 x 16

×3

Plate 2 x 16

×4

Slope 33 3 x 1

×2

Slope 33 3 x 1

×24

Slope, Curved 8 x 2

×4

Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Top

×2

Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom

×2

Technic, Axle 1L with Pin with Friction Ridges

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Left

×3

Wedge, Plate 3 x 2 Left

×2

Wedge, Plate 3 x 2 Left

×3

Dish 3 x 3 Inverted (Radar)

×2

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×8

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×6

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Cylinder Hemisphere 3 x 3 Ball Turret Socket with 2 x 2 Base

×3

Cylinder Hemisphere 3 x 3 Ball Turret

×6

Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove

×8

Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove

×4

Slope 75 2 x 1 x 3 - Hollow Stud

×2

Minifigure, Weapon Gun, Blaster with Studs on Sides, Bottom, and Front

×4

Bracket 1 x 2 - 2 x 2

×19

Bracket 1 x 2 - 2 x 2

×7

Bracket 1 x 2 - 2 x 2

×2

Plate 1 x 10

×2

Plate 1 x 10

×4

Plate 1 x 10

×7

Plate, Modified 1 x 8 with Door Rail

×15

Technic, Axle 3L

×2

Wedge 16 x 4 Triple Curved with Reinforcements

×4

Cone 1 x 1 with Top Groove

×24

Wedge, Plate 12 x 3 Left

×15

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Right

×15

Wedge, Plate 12 x 3 Right

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×2

Wedge, Plate 6 x 4 Right

×8

Wedge, Plate 6 x 4 Right

×2

Wedge, Plate 6 x 4 Right

×4

Wedge, Plate 6 x 4 Left

×8

Wedge, Plate 6 x 4 Left

×2

Wedge, Plate 6 x 4 Left

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×8

Panel 1 x 2 x 1 with Rounded Corners

×8

Engine, Smooth Large, Center with Fan/Gear and Axle End

×12

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×5

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

Technic, Axle 32L

×2

Slope, Curved 3 x 1

×6

Wedge 10 x 3 Left

×2

Wedge 10 x 3 Left

×2

Wedge 10 x 3 Right

×2

Wedge 10 x 3 Right

×2

Slope 30 1 x 1 x 2/3

×7

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×7

Slope 30 1 x 1 x 2/3

×5

Wedge, Plate 6 x 3 Right

×6

Wedge, Plate 6 x 3 Right

×2

Wedge, Plate 6 x 3 Right

×6

Wedge, Plate 6 x 3 Left

×6

Wedge, Plate 6 x 3 Left

×2

Wedge, Plate 6 x 3 Left

×6

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×2

Minifigure, Weapon Gun, Blaster SW Standard

Panel 1 x 6 x 5

×2

Arch 1 x 3 x 2 Curved Top

×30

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Plate, Round 4 x 4 with Hole

×8

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×4

Plate 1 x 12

×9

Plate 1 x 12

×2

Plate 1 x 12

×4

Plate 1 x 12

×2

Slope 65 2 x 1 x 2

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×4

Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs

×10

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×8

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×20

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Wedge, Plate 6 x 6 Cut Corner

×2

Wedge, Plate 6 x 6 Cut Corner

×2

Brick 1 x 10

×2

Brick 1 x 10

Brick 1 x 12

×4

Hinge Brick 2 x 2 Top Plate

×6

Hinge Brick 2 x 2 Top Plate

×4

Hinge Brick 2 x 2 Top Plate

×14

Slope 18 2 x 1 x 2/3 with Grille

×2

Door, Frame 1 x 4 x 4 Lift

×2

Tile, Modified 4 x 4 with Studs on Edge

×4

Tile, Modified 4 x 4 with Studs on Edge

×2

Tile, Modified 4 x 4 with Studs on Edge

×2

Tile, Modified 4 x 6 with Studs on Edges

×13

Tile, Modified 4 x 6 with Studs on Edges

Slope, Curved 1 x 4 x 1 1/3

×2

Cone 3 x 3 x 2

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×12

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×6

Cylinder Half 2 x 4 x 4

×2

Tile 1 x 3

×18

Tile 1 x 3

×2

Tile 1 x 3

×10

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×8

Wedge 4 x 3 Triple Curved No Studs

×2

Technic, Link 1 x 9 Bent (6 - 4)

×12

Minifigure, Weapon Lightsaber Hilt Straight

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×4

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×12

Technic, Brick 1 x 1 with Hole

×6

Technic, Pin 3L with Friction Ridges

×12

Brick, Round Corner 3 x 3 without Studs

×8

Technic, Axle 3L with Stud

×14

Technic, Gear 12 Tooth Bevel

×4

Tile 1 x 6

×16

Tile 1 x 6

×7

Tile 1 x 6

×2

Tile 1 x 6

×6

Tile 1 x 6

×2

Tile, Round 3 x 3

×2

Slope, Inverted 60 4 x 1 x 3

×2

Tile 2 x 6

×11

Sticker Sheet for Set 75309, Sheet 1 - (78793/6347356)

Sticker Sheet for Set 75309, Sheet 2 - (80308/6362614)

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

×8

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×2

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×32

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×14

Plate, Round 1 x 1 with Open Stud

×16

Slope 30 1 x 2 x 2/3

×18

Slope 30 1 x 2 x 2/3

×18

Slope 30 1 x 2 x 2/3

×11

Slope 30 1 x 2 x 2/3

×4

Slope 30 1 x 2 x 2/3 with Red, White, and Silver Buttons, Dark Red Screens Pattern

×4

Tile 2 x 4

×20

Tile 2 x 4

×5

Tile 2 x 4

×24

Tile 2 x 4

×4

Brick, Round 4 x 4 with Hole

×12

Technic, Axle 4L with Stop

Brick, Modified 1 x 1 with Stud on Side

×16

Brick, Modified 1 x 1 with Stud on Side

×2

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Brick, Modified Facet 2 x 2

×2

Tile, Modified 3 x 4 with 4 Studs in Center

×4

Tile, Modified 3 x 4 with 4 Studs in Center

×2

Tile, Modified 3 x 4 with 4 Studs in Center

×4

Brick, Modified 2 x 2 with Channels and Axle Hole

×4

Tile 8 x 16 with Bottom Tubes, Textured Surface

Plate 2 x 14

×4

Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)

Slope 45 2 x 1 with 2/3 Cutout

×16

Slope, Curved 4 x 1 x 2/3 Double

×4

Slope, Curved 4 x 1 x 2/3 Double

×2

Bracket 1 x 2 - 2 x 4

×6

Slope, Curved 4 x 2

×3

Slope, Curved 4 x 2

×2

Windscreen 8 x 8 x 3 Canopy Dome Half Sphere with Dual 2 Fingers with White, Light Bluish Gray and Bright Light Orange Republic Gunship Cockpit Pattern

×4