Clone Turbo Tank (with Light-Up Mace Windu, Trans-Light Purple Lightsaber Blade)

About Clone Turbo Tank (with Light-Up Mace Windu, Trans-Light Purple Lightsaber Blade)

Clone Turbo Tank (with Light-Up Mace Windu, Trans-Light Purple Lightsaber Blade) (7261-1) is a LEGO Star Wars set released in 2005, currently averaging $476.44 used on BrickLink. It comes with 6 minifigures worth a combined $241.06. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 189 pieces.

Part-out value

Minifig value: $241.06 out of $476.44 total (51%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

• Clone Scout Trooper Episode 3, 'Kashyyyk Trooper' ($112.82) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
• This is a vintage set (2005). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.
• 6 minifigures at $241.06 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.

Minifigures in Clone Turbo Tank (with Light-Up Mace Windu, Trans-Light Purple Lightsaber Blade) (6)

Battle Droid - Tan, Angled Arms

sw0001b×2$1.59

Clone Trooper (Phase 2) - Black Head, Continuous Mouth

sw0126$7.94

Clone Jet Trooper, Sky Corps (Phase 2) - Black Head

sw0127$19.50

Clone Trooper, 327th Star Corps (Phase 2) - Black Head, Orange Cloth Pauldron

sw0128$25.95

Clone Scout Trooper Episode 3, 'Kashyyyk Trooper'

sw0131$112.82

Mace Windu - Trans-Light Purple Light-Up Lightsaber

sw0133$71.65

Parts (189)

Slope, Inverted 45 3 x 1 Double

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×7

Tile, Modified 1 x 2 Grille with Bottom Groove

×9

Tile, Modified 1 x 2 Grille with Bottom Groove

Wedge, Plate 3 x 6 Cut Corners

×2

Plate 2 x 2 Corner

×8

Tile 1 x 4

×3

Tile 1 x 4

×2

Bracket 1 x 2 - 1 x 4

×2

Plate 2 x 12

×2

Plate 2 x 12

×2

Brick 2 x 6

×13

Brick 1 x 16

×2

Wheel Hard Plastic Large (54mm D. x 30mm)

×10

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Tile, Modified 1 x 1 with Clip

×5

Tile, Modified 1 x 1 with Clip

×2

Tile, Modified 1 x 1 with Clip

×8

Minifigure, Shield Oval with SW Red, Gray, and Black Lines Pattern

×2

Minifigure, Shield Oval with SW Small Rocket at Top Pattern

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Technic, Brick 1 x 10 with Holes

×2

Technic, Pin with Short Friction Ridges

×30

Brick, Modified 1 x 2 with Grille / Fluted Profile

×7

Brick, Modified 2 x 2 with Pins and Axle Hole

×3

Brick 2 x 4

×2

Brick 2 x 3

×6

Brick 2 x 2

×2

Brick 2 x 2

×3

Minifigure, Utensil Handlebars

Brick 1 x 2

×6

Plate, Modified 4 x 5 with Trap Door Hinge

×7

Minifigure, Weapon Gun, Pistol Revolver - Large Barrel and Solid Handle

×2

Brick, Modified 1 x 2 with Log Profile

×4

Minifigure, Utensil Binoculars Town

×4

Plate 2 x 4

×5

Plate 2 x 3

×8

Plate 2 x 2

×16

Plate 1 x 2

×6

Plate 1 x 2

×11

Brick, Modified 1 x 2 with Bar Handle on Side

Plate 6 x 16

×3

Plate 6 x 12

×2

Minifigure, Utensil Binoculars Space

Plate 4 x 6

×7

Plate 2 x 8

×3

Plate 2 x 8

Plate 4 x 8

×8

Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)

×2

Plate 6 x 8

Cylinder 3 x 6 x 2 2/3 Horizontal - Round Connections Between Interior Studs

Bar 4L (Lightsaber Blade / Wand)

×2

Bar 4L (Lightsaber Blade / Wand)

×11

Arm Mechanical, Battle Droid

Slope 45 2 x 2

×2

Slope 45 2 x 1

×2

Slope 45 2 x 1 Triple with Inside Bar

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

Plate, Round Corner 4 x 4

×2

Slope, Curved 2 x 2 Lip with Dark Red Panels, Black Grille, SW Republic Insignia Pattern

Brick, Round 1 x 1

Brick, Round 1 x 1

×12

Tile 2 x 2

×7

Tile 1 x 2

×14

Tile 1 x 2

×9

Technic, Brick 1 x 2 with Holes

×2

Technic, Axle and Pin Connector Angled #1

×4

Technic, Brick 1 x 14 with Holes

×2

Technic, Axle Connector with Axle Hole

×8

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Technic, Axle 2L Notched

×9

Technic, Brick 1 x 2 with Axle Hole

×5

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×4

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×4

Technic, Liftarm Thick 1 x 15

×4

Technic, Axle and Pin Connector Perpendicular Double

×4

Technic, Liftarm Thick 1 x 5

×4

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 7

×3

Technic, Liftarm Thick 1 x 7

×4

Technic, Liftarm Thick 1 x 11

×4

Technic, Pin 3L without Friction Ridges

×10

Technic, Pin Connector Perpendicular Double 3L

×4

Slope 33 3 x 2

Slope 33 3 x 2

×4

Slope 33 3 x 2

Plate 1 x 8

×2

Plate 1 x 8

×8

Plate 1 x 8

×3

Brick 1 x 3

×4

Plate 1 x 3

×4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Plate 1 x 6

×9

Technic, Pin without Friction Ridges

×14

Turntable 2 x 2 Plate with Light Bluish Gray Top (3680 / 3679)

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

×8

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×4

Technic, Axle 12L

Technic, Plate 2 x 4 with 3 Holes

×7

Plate 1 x 4

×3

Technic, Plate 2 x 8 with 7 Holes

Slope, Inverted 33 3 x 2 with Flat Bottom Pin without Connections between Studs

×2

Slope, Inverted 33 3 x 2 with Flat Bottom Pin without Connections between Studs

×11

Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)

Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)

×4

Plate 2 x 6

×4

Technic, Brick 1 x 6 with Holes

×7

Technic, Brick 1 x 12 with Holes

×2

Hinge Brick 1 x 2 Base

Hinge Brick 1 x 2 Base

×3

Hinge Brick 1 x 2 Top Plate

×4

Brick, Round 2 x 2 with Axle Hole

Brick, Round 2 x 2 with Axle Hole

×2

Plate 6 x 6

Dish 4 x 4 Inverted (Radar) with Solid Stud

Dish 4 x 4 Inverted (Radar) with Solid Stud

×5

Plate, Round 2 x 2 with Axle Hole

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

Minifigure, Utensil Seat / Chair 2 x 2

×2

Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)

×2

Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole

×12

Tile, Round 2 x 2

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Round Hole and Friction Ridges on Ends

×12

Tile 1 x 8

×8

Technic, Liftarm Thin 1 x 2 - Axle Holes

Wedge, Plate 4 x 2 Right

×4

Wedge, Plate 4 x 2 Left

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides, Lip End

Plate, Modified 2 x 2 with Vents

×2

Technic Bush 1/2 Smooth

×4

Technic, Axle 1L with Pin with Friction Ridges

×20

Minifigure, Utensil Loudhailer / Megaphone / SW Blaster

×3

Minifigure, Utensil Camera with Side Sight (Space Gun)

Wedge 4 x 2 Triple Left

×2

Wedge 4 x 2 Triple Right

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove

×3

Hinge Plate 1 x 4 Locking Dual 1 Finger on Side

Hinge Plate 3 x 4 Locking Dual 2 Fingers

Slope 75 2 x 1 x 3 - Open Stud

×6

Slope, Curved 2 x 2 with Debossed Side Ports

Bracket 1 x 2 - 2 x 2

×4

Plate, Modified 1 x 8 with Door Rail

Technic, Axle 3L

×8

Cone 1 x 1

×6

Cone 1 x 1

Cone 1 x 1

×4

Cone 1 x 1

×5

Antenna Small Base with Black Lever (4592 / 4593)

×4

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Bracket 8 x 2 x 1 1/3

Brick, Modified 1 x 1 with Studs on 4 Sides

Bar 1 x 3 with Clip and Stud Holder (Robot Arm)

×2

Dish 2 x 2 Inverted (Radar)

×5

Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End

Slope, Curved 1 x 2 x 2/3 Wing End

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Socket

×3

Wedge, Plate 8 x 3 Pentagonal Right

×5

Wedge, Plate 8 x 3 Pentagonal Left

×5

Wedge, Plate 2 x 4

×3

Brick, Round 2 x 2 Dome Top

×2

Plate, Modified 1 x 1 with U Clip (Horizontal Grip)

×16

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Brick 1 x 12

×2

Tile, Modified 4 x 4 with Studs on Edge

Bar 1 x 3 with 2 Stud Receptacles (Radio Handle / Telephone Handset)

×6

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Cylinder Half 2 x 4 x 4

×2

Technic, Axle and Pin Connector Perpendicular

×9

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×7

Technic, Axle 3L with Stud

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×3

Tile 1 x 6

×10

Tile 1 x 6

Technic, Shock Absorber 6.5L with Black Piston Rod - Soft Spring, Standard Coils

×2

Technic, Pin Connector Round 2L without Slot (Pin Joiner Round)

×2

Common questions about Clone Turbo Tank (with Light-Up Mace Windu, Trans-Light Purple Lightsaber Blade)

Explore more