Volvo Concept Wheel Loader ZEUX

About Volvo Concept Wheel Loader ZEUX

Volvo Concept Wheel Loader ZEUX (42081-1) is a LEGO LEGO set from 2018 valued at $104.64 on BrickLink. It contains 145 cataloged parts. This set has been retired and is only available on the secondary market.

Parts (145)

Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles

×4

Technic, Axle 1L with Pin 2L with Friction Ridges

×24

Technic, Liftarm Thin 1 x 5 - Axle Holes

×7

Technic, Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

Wheel 56mm D. x 34mm Technic Racing Medium, 6 Pin Holes

×4

Technic, Pin with Friction Ridges and Pin Hole

×10

Technic Digger Bucket 15 x 23

Technic, Panel Plate 3 x 11 x 1

×2

Technic, Panel Plate 3 x 11 x 1

Technic, Panel Plate 3 x 11 x 1

×4

Technic, Pin Connector 3L with 2 Pins and Center Hole

Technic, Axle 5L with Stop

×2

Technic, Axle 2L with Pin with Friction Ridges

×7

Technic, Liftarm Thick 1 x 1 (Spacer)

×23

Technic, Gear Rack 1 x 14 x 2 Housing

Technic, Gear Rack 1 x 14 x 2 with Axle and Pin Holes

Technic, Panel Curved 3 x 13

Technic, Panel Plate 5 x 11 x 1 Tapered

×4

Large Figure Weapon, Lightsaber Hilt Half 2L with Axle Hole

×3

Technic, Axle and Pin Connector Hub with 1L Axle

×4

Tire 107 x 44R Tractor

×4

Technic, Steering, Wheel Hub Holder with 2 Pin Holes and 2 Arms with Axle Holes with Slots

×4

Technic, Panel Curved 3 x 5 x 3

Technic, Panel Curved 3 x 5 x 3

×6

Technic, Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface

×2

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

×4

Technic, Axle Connector 3L

×2

Technic, Axle 1L with Tow Ball

Technic, Pin with Short Friction Ridges

×154

Technic, Gear Worm Screw, Short

Technic, Axle and Pin Connector Hub with 2 Axles on Opposite Sides

×3

Large Figure Armor Plate Small

×15

Plate 1 x 2

×3

Tile 1 x 2

×4

Technic, Pin 3/4

×7

Technic, Axle and Pin Connector Angled #1

×2

Technic, Axle and Pin Connector Angled #6 - 90 degrees

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

Technic, Pin 3L with Friction Ridges and Stop Bush

×30

Technic, Pin 3L with Friction Ridges and Stop Bush

×20

Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3

×2

Technic, Axle 2L Notched

×31

Technic, Axle 5L

×15

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×18

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×14

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×6

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×4

Technic, Gear 20 Tooth Bevel

×2

Hose, Soft Axle 12L

×2

Technic, Liftarm, Modified L-Shape Quarter Ellipse Thin 3 x 5

×4

Technic, Gear 20 Tooth Double Bevel

Technic, Gear 12 Tooth Double Bevel

×11

Technic, Liftarm, Modified Bent Thick 1 x 9 (7 - 3)

×6

Technic, Liftarm Thick 1 x 15

×8

Technic, Liftarm Thick 1 x 15

×17

Technic, Axle and Pin Connector Perpendicular Double

×12

Technic, Liftarm Thick 1 x 5

×10

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×6

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×10

Technic, Liftarm Thin 1 x 4 - Axle Holes

×2

Technic, Liftarm Thick 1 x 3

×9

Technic, Liftarm Thick 1 x 3

×3

Technic, Liftarm Thick 1 x 7

×12

Technic, Liftarm Thick 1 x 7

×24

Technic, Liftarm Thick 1 x 11

×2

Technic, Liftarm Thick 1 x 11

×13

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×8

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×6

Technic, Pin 3L without Friction Ridges

×4

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes

×3

Technic, Pin without Friction Ridges

×13

Technic, Axle 6L

×7

Technic, Axle 12L

×2

Plate 1 x 4

×2

Plate 1 x 4

×2

Technic Bush

×14

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×4

Technic, Liftarm Thick 1 x 9

×3

Technic, Liftarm Thick 1 x 13

Technic, Liftarm Thin 1 x 2 - Axle Holes

×4

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×14

Sticker Sheet for Set 42081 - (38959/6228528)

Technic Bush 1/2 Smooth

×12

Technic, Pin 1/2 without Friction Ridges

×81

Technic, Pin 1/2 without Friction Ridges

×11

Technic, Axle 1L with Pin with Friction Ridges

×54

Technic, Axle 7L

×11

Dish 6 x 6 Inverted (Radar) - Solid Studs

×4

Technic, Axle 3L

×15

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×6

Technic, Pin Connector Perpendicular 3L with 4 Pins

×6

Slope 30 1 x 1 x 2/3

×9

Technic, Axle 8L with Stop

×3

Technic, Axle Connector Hub with 3 Axles

×4

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×22

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

Technic, Axle 9L

×7

Slope 18 2 x 1 x 2/3 with Grille

×4

Technic, Axle and Pin Connector Block 4 x 3 x 2 1/2 (Linear Actuator Holder)

×3

Technic Linear Actuator with Dark Bluish Gray Ends, Type 1

×3

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Technic, Universal Joint 3L

×3

Technic, Axle and Pin Connector Perpendicular Triple

×2

Technic, Liftarm, Modified Frame Thick 5 x 7 Open Center

×8

Technic, Liftarm, Modified Ball Joint Straight 1 x 2 with 1 Hole in Ball

×2

Technic, Panel Fairing # 4 Small Smooth Long, Side B

×2

Technic, Panel Fairing # 4 Small Smooth Long, Side B

Technic, Panel Fairing # 3 Small Smooth Long, Side A

×2

Technic, Panel Fairing # 3 Small Smooth Long, Side A

Technic, Gear Rack 1 x 13 with Axle and Pin Holes

Technic, Panel Plate 5 x 11 x 1

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×11

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×6

Technic, Pin 3L with Friction Ridges

×88

Technic, Axle 3L with Stud

×8

Technic, Gear 12 Tooth Bevel

×4

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×4

Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)

×2

Tile 1 x 6

×2

Hose, Ribbed 7mm D. 3L / 2.4cm

Technic, Panel Fairing # 1 Small Smooth Short, Side A

×2

Technic, Pin 3L with Friction Ridges and Center Pin Hole

×6

Technic, Axle 4L with Stop

×5

Technic, Panel Fairing # 2 Small Smooth Short, Side B

×2

Technic, Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

×2

Propeller 7 Blade 6 Diameter

×2

Technic, Gear Rack 1 x 7 with Axle and Pin Holes

Bar 3L (Bar Arrow)

×3

Propeller 3 Blade 5 Diameter

×4

Technic, Axle and Pin Connector Perpendicular Split

×9

Technic, Steering, Wheel Hub 3 Pins Round

×4

Minifigure, Weapon Sword, Foil / Épée {Epee}

×2

Technic, Axle Connector 2 x 3 with Ball Joint Socket - Closed Sides, Straight Forks with Open Axle Holes

×2

Tile, Round 1 x 1

×10

Tile, Round 1 x 1

×10

Tile, Round 1 x 1

×3

Vehicle, Spoiler with Bar Handle

×2

Technic, Axle 4L with Center Stop

Minifigure, Utensil Ingot 1 x 2

×2

Technic, Liftarm, Modified Triangle Thin 3 x 5 with Short Supports

String with End Studs (10L Overall) with (Same Color) Studs Pattern

Common questions about Volvo Concept Wheel Loader ZEUX

Explore more