Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles
×4 Technic, Axle 1L with Pin 2L with Friction Ridges
×15 Technic, Pin Connector Perpendicular 2 x 4 Bent
×8 Technic, Liftarm Thin 1 x 5 - Axle Holes
×2 Technic, Panel Fairing #21 Very Small Smooth, Side B
×2 Technic, Panel Fairing #22 Very Small Smooth, Side A
×2 Technic, Liftarm, Modified H-Shape Thick 3 x 5 Perpendicular
×3 Technic, Pin with Friction Ridges and Pin Hole
×3 Tire 49.5 x 20
×4 Technic, Panel Plate 3 x 11 x 1
×3 Technic, Pin Connector 3L with 2 Pins and Center Hole
×6 Technic, Axle 5L with Stop
×6 Hose, Pneumatic 4mm D. V2 Precut 18L / 14.4cm
×2 Hose, Pneumatic 4mm D. V2 Precut 24L / 19.2cm
Hose, Pneumatic 4mm D. V2 Precut 29L / 23.2cm
×3 Technic, Liftarm Thick 1 x 1 (Spacer)
×15 Technic Turntable 60 Tooth, Base
Technic, Panel Curved 3 x 13
Pneumatic Cylinder V2 2 x 11
×2 Pneumatic Cylinder V2 1 x 5
Technic Grabber Arm Claw / Hook with 3L Liftarm Thick Type 2
×4 Hose, Pneumatic 4mm D. V2 Precut 9L / 7.2cm
×2 Hose, Pneumatic 4mm D. V2 Precut 37L / 29.6cm
×2 Technic, Panel Curved 3 x 5 x 3
Technic, Panel Curved 3 x 5 x 3
Technic, Axle 3L with Stop
×7 Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole
×2 Technic, Axle Connector 3L
×5 Pneumatic Pump Large (11L) with 1 x 3 Liftarm
Technic, Pin with Short Friction Ridges
×123 Technic, Gear Worm Screw, Short
Technic, Axle and Pin Connector Hub with 2 Axles on Opposite Sides
×5 Technic, Liftarm, Modified Stud Connector Thin 1 x 4
×6 Technic, Pin 3/4
×3 Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double
×2 Technic, Axle and Pin Connector Angled #1
×3 Technic, Liftarm Thin 1 x 5
×2 Technic, Axle and Pin Connector Angled #2 - 180 degrees
×5 Technic, Pin 3L with Friction Ridges and Stop Bush
×5 Technic, Pin 3L with Friction Ridges and Stop Bush
×15 Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3
×4 Technic, Axle 2L Notched
×12 Technic, Liftarm Thin 1 x 6
×2 Technic, Axle 5L
×9 Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
×10 Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
×8 Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
×6 Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
×8 Technic, Axle 5.5L with Stop
×3 Technic, Gear 20 Tooth Double Bevel
Technic, Gear 12 Tooth Double Bevel
×7 Technic, Liftarm Thick 1 x 15
×6 Technic, Liftarm Thick 1 x 15
×6 Technic, Liftarm Thick 1 x 15
Technic, Axle and Pin Connector Perpendicular Double
×4 Technic, Liftarm Thick 1 x 5
×7 Technic, Liftarm Thick 1 x 5
×4 Technic, Liftarm Thick 1 x 3
×15 Technic, Liftarm Thick 1 x 7
×8 Technic, Liftarm Thick 1 x 7
×4 Technic, Liftarm Thick 1 x 11
×10 Technic, Liftarm Thick 1 x 11
×3 Technic, Liftarm Thick 1 x 11
×8 Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
Technic, Pin 3L without Friction Ridges
×3 Hose, Soft Axle 7L
×2 Technic, Axle 4L
×2 Technic Bush
×8 Technic Bush
×5 Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Plate, Round 1 x 1
×4 Technic, Liftarm Thick 1 x 13
×3 Technic, Liftarm Thick 1 x 13
×6 Technic, Liftarm Thin 1 x 2 - Axle Holes
×4 Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
×9 Sticker Sheet for Set 42144 - (10080233/6362712)
Technic Bush 1/2 Smooth
×12 Technic, Pin 1/2 without Friction Ridges
×8 Technic, Axle 1L with Pin with Friction Ridges
×42 Technic, Liftarm Thick 1 x 2
×5 Technic, Axle 7L
×2 Technic, Pin Connector Perpendicular 2 x 2 Bent
×3 Technic, Pin Connector Perpendicular 2 x 2 Bent
×4 Technic, Axle 3L
×19 Pneumatic T Piece Second Version (T Bar with Ball in Center)
×3 Technic, Pin Connector Perpendicular 3L with 4 Pins
×2 Slope 30 1 x 1 x 2/3
×3 Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim
×4 Technic, Liftarm Thick 1 x 2 - Axle Hole
×8 Technic, Liftarm, Modified T-Shape Thick 3 x 3
×7 Technic, Liftarm, Modified T-Shape Thick 3 x 3
×8 Technic, Axle 9L
×2 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole
Slope 18 2 x 1 x 2/3 with Grille
×2 Technic, Axle and Pin Connector Perpendicular Triple
Technic, Liftarm, Modified Frame Thick 5 x 11 Open Center
×3 Technic, Liftarm, Modified Frame Thick 5 x 7 Open Center
Technic, Panel Plate 5 x 11 x 1
Technic, Axle 2L with Pin without Friction Ridges
×8 Technic, Axle and Pin Connector Perpendicular
×22 Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
×3 Technic, Brick 1 x 1 with Hole
×2 Technic, Pin 3L with Friction Ridges
×103 Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)
×2 Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)
×2 Technic, Liftarm Thin 1 x 3 - Axle Holes
×2 Technic, Axle and Pin Connector Perpendicular Double Split, Reinforced Sides
×4 Technic, Panel Curved 2 x 3 x 1
×3 Technic, Liftarm, Modified L-Shape Quarter Ellipse Thick 2 x 3
×5 Technic, Liftarm, Modified L-Shape Quarter Ellipse Thick 2 x 3
×10 Technic, Liftarm, Modified Perpendicular Holes Thick 1 x 15
×4 Technic, Liftarm, Modified Perpendicular Holes Thick 1 x 11
×3 Technic, Pin 3L without Friction Ridges with Stop
×13 Hose, Pneumatic 4mm D. V2 Precut 5L / 4.0cm
×5 Hose, Pneumatic 4mm D. V2 Precut 16L / 12.8cm
×2 Technic, Pin 3L with Friction Ridges and Center Pin Hole
×7 Technic, Axle 4L with Stop
×9 Technic, Gear Rack 1 x 7 with Axle and Pin Holes
Technic Turntable 60 Tooth Straight, Top
Technic, Axle and Pin Connector Perpendicular Split
×4 Technic, Axle 4L with Center Stop
Pneumatic Hose Connector with Axle Connector
×6 Technic, Liftarm, Modified Triangle Thin 3 x 5 with Short Supports
×2 Pneumatic Switch with Pin Holes and Axle Hole
×3 Bionicle 1 x 3 Tooth with Axle Hole (Bohrok Eye)
×3