brick'em
The Orc Forge

The Orc Forge

9476-1·Lord of the Rings·2012·4 minifigs·109 parts

Used Avg
$183.99
New Avg
$246.69
Add to your inventoryScan the minifigs

About The Orc Forge

The Orc Forge (9476-1) is a LEGO Lord of the Rings set released in 2012, currently averaging $183.99 used on BrickLink. It comes with 4 minifigures worth a combined $85.97. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 109 pieces.

Part-out value

The minifigures account for about 47% of the set's value ($85.97 out of $183.99). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Seller notes

  • Uruk-hai - Handprint Helmet ($37.71) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.

Minifigures in The Orc Forge (4)

Uruk-hai - Handprint Helmet
Uruk-hai - Handprint Helmet
lor022$37.71
Mordor Orc - Dark Tan
Mordor Orc - Dark Tan
lor023$18.29
Mordor Orc - Bald
Mordor Orc - Bald
lor024$13.01
Lurtz
Lurtz
lor025$16.95

Parts (109)

Minifigure, Shield Broad Spiked Bottom and Cutout Corner (Uruk-hai Shield) with White Handprint Pattern
Minifigure, Shield Broad Spiked Bottom and Cutout Corner (Uruk-hai Shield) with White Handprint Pattern
×2
Minifigure, Weapon Sword, Uruk-hai
Minifigure, Weapon Sword, Uruk-hai
×4
Minifigure, Headgear Helmet Castle with Lateral Comb and Handprint Pattern
Minifigure, Headgear Helmet Castle with Lateral Comb and Handprint Pattern
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×4
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Tile 1 x 4
Tile 1 x 4
×4
Tile 1 x 4 with Wood Grain and 4 Nails Pattern
Tile 1 x 4 with Wood Grain and 4 Nails Pattern
×2
Minifigure Armor Breastplate with Leg Protection
Minifigure Armor Breastplate with Leg Protection
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×7
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×9
Brick 2 x 3
Brick 2 x 3
×2
Brick 1 x 2
Brick 1 x 2
×3
Brick 1 x 1
Brick 1 x 1
×8
Brick 1 x 1
Brick 1 x 1
×2
Brick 1 x 4
Brick 1 x 4
×6
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
×7
Plate 2 x 4
Plate 2 x 4
×6
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×4
Plate 1 x 1
Plate 1 x 1
×2
Plate 6 x 12
Plate 6 x 12
×4
Plate 4 x 4
Plate 4 x 4
Plate 4 x 6
Plate 4 x 6
Tile, Modified 2 x 3 with 2 U Clips
Tile, Modified 2 x 3 with 2 U Clips
Hook with Tow Ball
Hook with Tow Ball
Slope 45 2 x 1
Slope 45 2 x 1
×16
Slope 45 2 x 1
Slope 45 2 x 1
×2
Slope 45 2 x 2 Double Convex Corner
Slope 45 2 x 2 Double Convex Corner
×2
Slope 45 2 x 2 Double Concave
Slope 45 2 x 2 Double Concave
×13
Brick, Modified 1 x 2 with Pins
Brick, Modified 1 x 2 with Pins
Brick, Round  1 x 1
Brick, Round 1 x 1
×7
Brick 1 x 2 without Bottom Tube
Brick 1 x 2 without Bottom Tube
×2
Tile 2 x 2
Tile 2 x 2
×3
Tile 1 x 2
Tile 1 x 2
×4
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
String Reel 3 x 2 x 3 Drum with Axle Hole
String Reel 3 x 2 x 3 Drum with Axle Hole
Technic, Axle  2L Notched
Technic, Axle 2L Notched
Technic, Axle  5.5L with Stop
Technic, Axle 5.5L with Stop
Technic, Liftarm Thick 1 x 15
Technic, Liftarm Thick 1 x 15
×2
Technic, Pin Connector Block 1 x 5 x 3
Technic, Pin Connector Block 1 x 5 x 3
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 3
Brick 1 x 3
Brick 1 x 3
Brick 1 x 3
Brick 1 x 3
Plate 1 x 3
Plate 1 x 3
×12
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×16
Plate 1 x 6
Plate 1 x 6
×8
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×2
Plate 1 x 4
Plate 1 x 4
Plate 1 x 4
Plate 1 x 4
×2
Technic Bush
Technic Bush
×2
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate 2 x 6
Plate 2 x 6
×2
Plate 2 x 6
Plate 2 x 6
Minifigure, Utensil Shovel / Spade - Handle with Round End
Minifigure, Utensil Shovel / Spade - Handle with Round End
Technic, Brick 1 x 6 with Holes
Technic, Brick 1 x 6 with Holes
Support 2 x 2 x 2 Stand with Complete Hole
Support 2 x 2 x 2 Stand with Complete Hole
Plate 6 x 6
Plate 6 x 6
×2
Plate 6 x 6
Plate 6 x 6
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 1 x 1
Plate, Round 1 x 1
×4
Plate, Round 1 x 1
Plate, Round 1 x 1
×14
Tile, Round 2 x 2
Tile, Round 2 x 2
Minifigure, Utensil Pot Cauldron 3 x 3 x 1 & 3/4 with Handles
Minifigure, Utensil Pot Cauldron 3 x 3 x 1 & 3/4 with Handles
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×2
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
×2
Support 1 x 1 x 6 Solid Pillar
Support 1 x 1 x 6 Solid Pillar
×4
Dish 3 x 3 Inverted (Radar)
Dish 3 x 3 Inverted (Radar)
×2
Plate 1 x 10
Plate 1 x 10
×2
Plate 1 x 10
Plate 1 x 10
Minifigure, Utensil Tool Mallet / Hammer
Minifigure, Utensil Tool Mallet / Hammer
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×4
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Rock Panel 2 x 4 x 6
Rock Panel 2 x 4 x 6
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Panel 1 x 2 x 1
Panel 1 x 2 x 1
×4
Panel 1 x 2 x 1
Panel 1 x 2 x 1
×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×21
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
×3
Electric, Light Brick 2 x 3 x 1 1/3 with Trans-Red Top and Red LED Light
Electric, Light Brick 2 x 3 x 1 1/3 with Trans-Red Top and Red LED Light
Slope 18 4 x 1
Slope 18 4 x 1
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
×4
Plate 1 x 12
Plate 1 x 12
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×17
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×4
Technic, Axle  9L
Technic, Axle 9L
Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)
Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)
×4
Tile 1 x 3
Tile 1 x 3
×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×2
Support 1 x 6 x 5 Girder Rectangular
Support 1 x 6 x 5 Girder Rectangular
×3
Technic, Plate Rotor 6 Blade with Clip Ends Connected (Water Wheel) - Hollow Studs
Technic, Plate Rotor 6 Blade with Clip Ends Connected (Water Wheel) - Hollow Studs
×2
Minifigure, Utensil Telescope
Minifigure, Utensil Telescope
×2
Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin
Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin
×3
Container, Barrel Half Large with Axle Hole
Container, Barrel Half Large with Axle Hole
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder
Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×2
Brick, Modified Facet 2 x 2
Brick, Modified Facet 2 x 2
×6
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Clip with Center Cut on Top
×2
Plate, Modified 1 x 4 with 2 Studs without Groove
Plate, Modified 1 x 4 with 2 Studs without Groove
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
×2
Brick and Axle Separator
Brick and Axle Separator
Tile, Round 1 x 1
Tile, Round 1 x 1
×7
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×2
String, Cord Thin    50cm
String, Cord Thin 50cm

Common questions about The Orc Forge

How much is LEGO The Orc Forge (9476-1) worth?

The Orc Forge sells for an average of $183.99 used and $246.69 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 9476-1?

This set includes 4 minifigures: Uruk-hai - Handprint Helmet ($37.71), Mordor Orc - Dark Tan ($18.29), Mordor Orc - Bald ($13.01), Lurtz ($16.95). The minifigures have a combined BrickLink value of $85.97. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Orc Forge?

The minifigures make up about 47% of the set value ($85.97 out of $183.99). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Orc Forge (9476-1) retired?

Yes, The Orc Forge was released in 2012 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my The Orc Forge set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Lord of the Rings setsLord of the Rings minifiguresMost valuable Lord of the Rings figsFree scanner