brick'em
The Bat-Tank: The Riddler and Bane's Hideout

The Bat-Tank: The Riddler and Bane's Hideout

7787-1·Batman·2007·3 minifigs·139 parts

Used Avg
$690.29
New Avg
$1374.99
Add to your inventoryScan the minifigs

About The Bat-Tank: The Riddler and Bane's Hideout

The Bat-Tank: The Riddler and Bane's Hideout (7787-1) is a LEGO Batman set from 2007 that sells for around $690.29 used on BrickLink. It includes 3 minifigures with a combined resale value of $449.84 — that's 65% of the set's price in figures alone. The most valuable is Bane at $283.65. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

Minifig value: $449.84 out of $690.29 total (65%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • Sealed copies sell for $1374.99 vs $690.29 used — a 99% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Bane ($283.65) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2007). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in The Bat-Tank: The Riddler and Bane's Hideout (3)

Bane
Bane
bat021$283.65
Batman - Light Bluish Gray Suit, Dark Blue Mask
Batman - Light Bluish Gray Suit, Dark Blue Mask
bat022$133.21
The Riddler - Black Hair, Jet Pack
The Riddler - Black Hair, Jet Pack
bat023$32.99

Parts (139)

Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×6
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×7
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×2
Tile 1 x 4
Tile 1 x 4
×19
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×2
Brick 1 x 1 x 5 - Hollow Stud
Brick 1 x 1 x 5 - Hollow Stud
×4
Brick 1 x 2 x 5
Brick 1 x 2 x 5
×4
Brick, Modified 1 x 2 with Pin
Brick, Modified 1 x 2 with Pin
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×2
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
Technic, Disk 3 x 3
Technic, Disk 3 x 3
×28
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×2
Plate, Modified 2 x 2 with Pin Holes
Plate, Modified 2 x 2 with Pin Holes
Technic, Liftarm, Modified Stud Connector Thin 1 x 4
Technic, Liftarm, Modified Stud Connector Thin 1 x 4
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×5
Brick 2 x 3
Brick 2 x 3
×2
Brick 2 x 2
Brick 2 x 2
×2
Brick 1 x 2
Brick 1 x 2
×8
Brick 1 x 2
Brick 1 x 2
Brick 1 x 1
Brick 1 x 1
×2
Brick 1 x 8
Brick 1 x 8
×2
Brick 1 x 6
Brick 1 x 6
×2
Chain 21 Links (16-17L)
Chain 21 Links (16-17L)
Minifigure, Utensil Binoculars Town
Minifigure, Utensil Binoculars Town
×4
Plate 2 x 4
Plate 2 x 4
Plate 2 x 3
Plate 2 x 3
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×3
Brick, Modified 1 x 2 with Bar Handle on Side
Brick, Modified 1 x 2 with Bar Handle on Side
×6
Plate 1 x 1
Plate 1 x 1
×4
Road Sign 2 x 2 Square with Clip
Road Sign 2 x 2 Square with Clip
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 6
Plate 4 x 6
Plate 6 x 10
Plate 6 x 10
Wedge, Plate 12 x 6 Left
Wedge, Plate 12 x 6 Left
×2
Wedge, Plate 12 x 6 Right
Wedge, Plate 12 x 6 Right
×2
Plate, Round Corner 3 x 3
Plate, Round Corner 3 x 3
×2
Hinge Brick 1 x 2 Locking with 1 Finger Vertical End
Hinge Brick 1 x 2 Locking with 1 Finger Vertical End
×2
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End
×2
Slope 45 2 x 2
Slope 45 2 x 2
×2
Slope 45 2 x 1
Slope 45 2 x 1
×4
Brick, Round  1 x 1
Brick, Round 1 x 1
×2
Brick, Round  1 x 1
Brick, Round 1 x 1
×2
Tile 2 x 2
Tile 2 x 2
Tile 1 x 2
Tile 1 x 2
×3
Tile 1 x 2
Tile 1 x 2
×9
Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern
Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern
Tile 1 x 2 with Currency / Money, 100 Bill / Note Pattern
Tile 1 x 2 with Currency / Money, 100 Bill / Note Pattern
×2
Tile 1 x 1
Tile 1 x 1
×3
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
Technic, Pin 3/4
Technic, Pin 3/4
×3
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
×4
Technic, Liftarm Thin 1 x 5
Technic, Liftarm Thin 1 x 5
×8
Technic, Axle  2L Notched
Technic, Axle 2L Notched
×3
Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports
Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports
×2
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
×4
Technic, Axle  5.5L with Stop
Technic, Axle 5.5L with Stop
Technic, Liftarm Thick 1 x 15
Technic, Liftarm Thick 1 x 15
×2
Technic, Axle and Pin Connector Perpendicular Double
Technic, Axle and Pin Connector Perpendicular Double
Technic, Liftarm Thick 1 x 5
Technic, Liftarm Thick 1 x 5
×6
Technic, Liftarm Thick 1 x 5
Technic, Liftarm Thick 1 x 5
×2
Technic, Liftarm Thin 1 x 4 - Axle Holes
Technic, Liftarm Thin 1 x 4 - Axle Holes
×4
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 3
×4
Technic, Liftarm Thick 1 x 7
Technic, Liftarm Thick 1 x 7
×2
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
×4
Technic, Brick 6 x 8 Open Center
Technic, Brick 6 x 8 Open Center
Brick 1 x 3
Brick 1 x 3
×4
Plate 1 x 6
Plate 1 x 6
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×2
Turntable 2 x 2 Plate, Top
Turntable 2 x 2 Plate, Top
×2
Turntable 2 x 2 Plate, Base
Turntable 2 x 2 Plate, Base
×2
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×2
Plate 1 x 4
Plate 1 x 4
×2
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×2
Plate 2 x 6
Plate 2 x 6
×2
Technic, Link Tread
Technic, Link Tread
×158
Technic, Brick 1 x 6 with Holes
Technic, Brick 1 x 6 with Holes
×2
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
×2
Hinge Brick 1 x 2 Top Plate
Hinge Brick 1 x 2 Top Plate
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Plate 6 x 6
Plate 6 x 6
×4
Dish 4 x 4 Inverted (Radar) with Solid Stud
Dish 4 x 4 Inverted (Radar) with Solid Stud
Support 1 x 1 x 5 1/3 Spiral Staircase Axle
Support 1 x 1 x 5 1/3 Spiral Staircase Axle
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Technic, Liftarm Thick 1 x 9
Technic, Liftarm Thick 1 x 9
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
Plate, Round 1 x 1
Plate, Round 1 x 1
×6
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
×6
Technic, Liftarm Thick 1 x 13
Technic, Liftarm Thick 1 x 13
×2
Tile 1 x 8
Tile 1 x 8
×4
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×2
Wheel 11mm D. x 8mm with Center Groove, 4 Spokes
Wheel 11mm D. x 8mm with Center Groove, 4 Spokes
Tire 17.5mm D. x 6mm with Shallow Staggered Treads
Tire 17.5mm D. x 6mm with Shallow Staggered Treads
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×24
Slope 33 3 x 1
Slope 33 3 x 1
×4
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×5
Technic, Axle  3L
Technic, Axle 3L
×18
Wedge 16 x 4 Triple Curved with Reinforcements
Wedge 16 x 4 Triple Curved with Reinforcements
×2
Technic, Axle Connector Double - Flexible Rubber
Technic, Axle Connector Double - Flexible Rubber
Windscreen 10 x 6 x 2 Curved
Windscreen 10 x 6 x 2 Curved
Cone 1 x 1
Cone 1 x 1
×2
Cone 1 x 1
Cone 1 x 1
×3
Cone 1 x 1
Cone 1 x 1
×2
Antenna Small Base with Black Lever (4592 / 4593)
Antenna Small Base with Black Lever (4592 / 4593)
×5
Tap 1 x 1 with Hole in Nozzle End
Tap 1 x 1 with Hole in Nozzle End
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
×2
Brick, Modified 1 x 1 with Studs on 4 Sides
Brick, Modified 1 x 1 with Studs on 4 Sides
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Plate, Modified 1 x 1 with Tooth Horizontal
Plate, Modified 1 x 1 with Tooth Horizontal
×6
Motorcycle Chassis, Short Fairing Mounts and Foot Pegs
Motorcycle Chassis, Short Fairing Mounts and Foot Pegs
Motorcycle Fairing, Dirt Bike
Motorcycle Fairing, Dirt Bike
Tire 21mm D. x 6mm City Motorcycle
Tire 21mm D. x 6mm City Motorcycle
×2
Wheel 15mm D. x 6mm City Motorcycle
Wheel 15mm D. x 6mm City Motorcycle
×2
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×4
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×22
Brick, Round 2 x 2 Dome Top
Brick, Round 2 x 2 Dome Top
Dragon Wing 8 x 10
Dragon Wing 8 x 10
×2
Minifigure, Weapon Pack Batman, 8 in Bag (Multipack)
Minifigure, Weapon Pack Batman, 8 in Bag (Multipack)
Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern
Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern
Projectile Launcher, Cannon, Flat Bottom
Projectile Launcher, Cannon, Flat Bottom
Support 2 x 2 x 10 Girder Triangular Vertical - Type 3 - 3 Posts, 2 Sections
Support 2 x 2 x 10 Girder Triangular Vertical - Type 3 - 3 Posts, 2 Sections
×2
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
×2
Bar 9 x 13 Grille
Bar 9 x 13 Grille
×2
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×2
Wedge, Plate 6 x 6 Cut Corner
Wedge, Plate 6 x 6 Cut Corner
×4
Technic, Axle and Pin Connector Perpendicular
Technic, Axle and Pin Connector Perpendicular
×2
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
×44
Technic, Axle  3L with Stud
Technic, Axle 3L with Stud
×4
Technic, Liftarm Thin 1 x 3 - Axle Holes
Technic, Liftarm Thin 1 x 3 - Axle Holes
Sticker Sheet for Set 7787 - (60401/4511973)
Sticker Sheet for Set 7787 - (60401/4511973)

Common questions about The Bat-Tank: The Riddler and Bane's Hideout

How much is LEGO The Bat-Tank: The Riddler and Bane's Hideout (7787-1) worth?

The Bat-Tank: The Riddler and Bane's Hideout sells for an average of $690.29 used and $1374.99 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7787-1?

This set includes 3 minifigures: Bane ($283.65), Batman - Light Bluish Gray Suit, Dark Blue Mask ($133.21), The Riddler - Black Hair, Jet Pack ($32.99). The minifigures have a combined BrickLink value of $449.84. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Bat-Tank: The Riddler and Bane's Hideout?

The minifigures alone are worth $449.84 (65% of the $690.29 set price), so parting out the figs individually on BrickLink can be profitable. Start with Bane at $283.65 — it's the highest-value figure in the set.

Is LEGO The Bat-Tank: The Riddler and Bane's Hideout (7787-1) retired?

Yes, The Bat-Tank: The Riddler and Bane's Hideout was released in 2007 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my The Bat-Tank: The Riddler and Bane's Hideout set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Batman setsBatman minifiguresMost valuable Batman figsFree scanner