brick'em
The Tumbler: Joker's Ice Cream Surprise

The Tumbler: Joker's Ice Cream Surprise

7888-1·Batman·2008·3 minifigs·163 parts

Used Avg
$351.93
New Avg
$411.62
Add to your inventoryScan the minifigs

About The Tumbler: Joker's Ice Cream Surprise

The Tumbler: Joker's Ice Cream Surprise (7888-1) is a LEGO Batman set released in 2008, currently averaging $351.93 used on BrickLink. It comes with 3 minifigures worth a combined $102.86. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 163 pieces.

Part-out value

The minifigures account for about 29% of the set's value ($102.86 out of $351.93). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Seller notes

  • The Joker - Orange Vest ($77.55) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2008). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in The Tumbler: Joker's Ice Cream Surprise (3)

The Joker - Orange Vest
The Joker - Orange Vest
bat005$77.55
The Joker's Henchman
The Joker's Henchman
bat007$9.93
Batman - Dark Bluish Gray Suit, Black Mask
Batman - Dark Bluish Gray Suit, Black Mask
bat024$15.38

Parts (163)

Flag 2 x 2 Square
Flag 2 x 2 Square
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×5
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×16
Wedge, Plate 3 x 6 Cut Corners
Wedge, Plate 3 x 6 Cut Corners
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Tile 1 x 4
Tile 1 x 4
×2
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
×2
Plate 2 x 12
Plate 2 x 12
Brick 2 x 6
Brick 2 x 6
Brick 2 x 6
Brick 2 x 6
×2
Brick 2 x 6
Brick 2 x 6
×2
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
×6
Technic, Brick 1 x 10 with Holes
Technic, Brick 1 x 10 with Holes
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×21
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×4
Brick, Modified 1 x 1 with Bar Handle
Brick, Modified 1 x 1 with Bar Handle
×2
Brick 2 x 4
Brick 2 x 4
Brick 2 x 3
Brick 2 x 3
×2
Brick 2 x 2
Brick 2 x 2
×2
Brick 1 x 2
Brick 1 x 2
×3
Brick 1 x 2
Brick 1 x 2
×4
Brick 1 x 2
Brick 1 x 2
×4
Brick 1 x 1
Brick 1 x 1
×4
Brick 1 x 8
Brick 1 x 8
×2
Brick 1 x 6
Brick 1 x 6
×2
Brick 1 x 4
Brick 1 x 4
×5
Brick 1 x 4
Brick 1 x 4
×2
Plate 2 x 4
Plate 2 x 4
Plate 2 x 4
Plate 2 x 4
×4
Plate 2 x 3
Plate 2 x 3
×3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
×2
Ice Pop (Freezer / Lollipop / Lolly / Pole / Popsicle / Stick)
Ice Pop (Freezer / Lollipop / Lolly / Pole / Popsicle / Stick)
×2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
×6
Plate 1 x 2
Plate 1 x 2
×2
Plate 6 x 16
Plate 6 x 16
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 6
Plate 4 x 6
Plate 4 x 8
Plate 4 x 8
×2
Plate 4 x 8
Plate 4 x 8
Plate 6 x 8
Plate 6 x 8
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Slope 45 2 x 2
Slope 45 2 x 2
×8
Slope 45 2 x 2 with Radar and Disk Slot Pattern
Slope 45 2 x 2 with Radar and Disk Slot Pattern
Slope 45 2 x 1
Slope 45 2 x 1
×16
Wedge, Plate 4 x 4 Cut Corner
Wedge, Plate 4 x 4 Cut Corner
×2
Brick, Modified 1 x 2 with Pins
Brick, Modified 1 x 2 with Pins
Brick, Round  1 x 1
Brick, Round 1 x 1
×8
Brick, Round  1 x 1
Brick, Round 1 x 1
×2
Tile 2 x 2
Tile 2 x 2
×4
Tile 1 x 2
Tile 1 x 2
×10
Tile 1 x 1
Tile 1 x 1
×3
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
×2
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Brick 1 x 14 with Holes
Technic, Brick 1 x 14 with Holes
×2
Technic, Axle  2L Notched
Technic, Axle 2L Notched
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
×2
Technic, Axle  5.5L with Stop
Technic, Axle 5.5L with Stop
×2
Technic, Gear 12 Tooth Double Bevel
Technic, Gear 12 Tooth Double Bevel
×2
Brick 1 x 2 x 2 with Inside Axle Holder
Brick 1 x 2 x 2 with Inside Axle Holder
×2
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 3
×2
Technic, Brick 4 x 6 Open Center
Technic, Brick 4 x 6 Open Center
×2
Technic, Brick 6 x 8 Open Center
Technic, Brick 6 x 8 Open Center
×2
Technic, Pin 3L without Friction Ridges
Technic, Pin 3L without Friction Ridges
Slope 33 3 x 4
Slope 33 3 x 4
×2
Slope 33 3 x 2
Slope 33 3 x 2
×5
Slope 33 3 x 2
Slope 33 3 x 2
×2
Plate 1 x 8
Plate 1 x 8
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×4
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×2
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
×2
Plate 1 x 6
Plate 1 x 6
×2
Slope 33 3 x 3 Double Convex Corner
Slope 33 3 x 3 Double Convex Corner
×2
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×2
Technic, Brick 1 x 8 with Holes
Technic, Brick 1 x 8 with Holes
×2
Technic, Axle  4L
Technic, Axle 4L
Plate 1 x 4
Plate 1 x 4
×3
Plate 1 x 4
Plate 1 x 4
Plate 1 x 4
Plate 1 x 4
×2
Technic Bush
Technic Bush
×6
Plate 2 x 6
Plate 2 x 6
×3
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
×2
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Cone 2 x 2 x 2 - Open Stud
Cone 2 x 2 x 2 - Open Stud
Plate 6 x 6
Plate 6 x 6
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×6
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
×6
Windscreen 2 x 6 x 2
Windscreen 2 x 6 x 2
Wedge 4 x 2 Right
Wedge 4 x 2 Right
Wedge 4 x 2 Left
Wedge 4 x 2 Left
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Panel 1 x 4 x 3 - Hollow Studs
Panel 1 x 4 x 3 - Hollow Studs
×2
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×5
Plate 2 x 16
Plate 2 x 16
Slope 33 3 x 1
Slope 33 3 x 1
×6
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×4
Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
×3
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
×2
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×2
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
×2
Tire 43.2 x 22 ZR
Tire 43.2 x 22 ZR
×2
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
×4
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
×3
Plate, Modified 2 x 2 with Wheel Holder
Plate, Modified 2 x 2 with Wheel Holder
×4
Technic, Axle Connector Double - Flexible Rubber
Technic, Axle Connector Double - Flexible Rubber
Cone 1 x 1
Cone 1 x 1
×2
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×4
Panel 1 x 2 x 2 - Hollow Studs
Panel 1 x 2 x 2 - Hollow Studs
×2
Panel 1 x 2 x 1
Panel 1 x 2 x 1
Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round
Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round
×4
Vehicle, Air Scoop Engine Top 2 x 2
Vehicle, Air Scoop Engine Top 2 x 2
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×2
Wedge 4 x 6 x 2/3 Triple Curved
Wedge 4 x 6 x 2/3 Triple Curved
×2
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×21
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
Technic, Axle  8L with Stop
Technic, Axle 8L with Stop
×2
Brick, Round 2 x 2 Dome Top
Brick, Round 2 x 2 Dome Top
×2
Brick, Round 2 x 2 Dome Top
Brick, Round 2 x 2 Dome Top
×2
Minifigure, Weapon Pack Batman, 8 in Bag (Multipack)
Minifigure, Weapon Pack Batman, 8 in Bag (Multipack)
Tire 56 x 26 Balloon
Tire 56 x 26 Balloon
×4
Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim
Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim
×6
Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern
Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern
×2
Projectile Launcher, Cannon, Flat Bottom
Projectile Launcher, Cannon, Flat Bottom
Projectile Launcher, Cannon, Flat Bottom
Projectile Launcher, Cannon, Flat Bottom
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
×4
Tire 21mm D. x 12mm - Offset Tread Small Wide
Tire 21mm D. x 12mm - Offset Tread Small Wide
×4
Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip)
×2
Slope 18 4 x 1
Slope 18 4 x 1
×6
Door 1 x 3 x 3 Right - Open Between Top and Bottom Hinge
Door 1 x 3 x 3 Right - Open Between Top and Bottom Hinge
Door 1 x 3 x 3 Left - Open Between Top and Bottom Hinge
Door 1 x 3 x 3 Left - Open Between Top and Bottom Hinge
Windscreen 5 x 2 x 1 2/3
Windscreen 5 x 2 x 1 2/3
×3
Windscreen 5 x 2 x 1 2/3
Windscreen 5 x 2 x 1 2/3
×3
Brick 1 x 10
Brick 1 x 10
Brick 1 x 10
Brick 1 x 10
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
×2
Slope, Curved 3 x 2 with 4 Studs
Slope, Curved 3 x 2 with 4 Studs
×2
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×2
Wedge 3 x 2  Right
Wedge 3 x 2 Right
Wedge 3 x 2  Left
Wedge 3 x 2 Left
Tile 1 x 6
Tile 1 x 6
×2
Sticker Sheet for Set 7888 - (62882/4525909)
Sticker Sheet for Set 7888 - (62882/4525909)

Common questions about The Tumbler: Joker's Ice Cream Surprise

How much is LEGO The Tumbler: Joker's Ice Cream Surprise (7888-1) worth?

The Tumbler: Joker's Ice Cream Surprise sells for an average of $351.93 used and $411.62 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7888-1?

This set includes 3 minifigures: The Joker - Orange Vest ($77.55), The Joker's Henchman ($9.93), Batman - Dark Bluish Gray Suit, Black Mask ($15.38). The minifigures have a combined BrickLink value of $102.86. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Tumbler: Joker's Ice Cream Surprise?

The minifigures make up about 29% of the set value ($102.86 out of $351.93). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Tumbler: Joker's Ice Cream Surprise (7888-1) retired?

Yes, The Tumbler: Joker's Ice Cream Surprise was released in 2008 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my The Tumbler: Joker's Ice Cream Surprise set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Batman setsBatman minifiguresMost valuable Batman figsFree scanner