LEGO Prince of Persia minifigure prices mostly run between $3 and $15 today, with common figures like Dastan trading closer to $3 and rarer Hassansin assassins and Alamut guards pushing toward $12 to $19 depending on condition and completeness. From what I've seen pulling numbers out of brick'em's BrickLink-integrated pricing data, values swing a lot by exact variant, so checking the specific figure matters more than going off the set name alone.
Prince of Persia was a one-wave LEGO theme released in 2010 to tie into the Disney movie Prince of Persia: The Sands of Time. It never got a second wave, so the entire lineup is capped at a small handful of minifigures spread across four sets. That fixed supply is a big part of why resellers still ask about this theme more than a decade later. I pulled current figures from brick'em's database below so you can see exactly where the value sits before you buy, sell, or price out a lot.
- Most Prince of Persia minifigures average $3 to $14, based on current brick'em pricing data.
- The Hassansin assassins are the most valuable figure group, with Gool averaging over $14.
- The theme ran for one year only (2010), so total supply is fixed and will not grow.
- Four sets make up the whole wave: 7570, 7571, 7572, and 7573.
- Battle of Alamut (set 7573) is the priciest set in the theme, averaging around $132.
What Made LEGO Prince of Persia a One-Wave Theme?
LEGO Prince of Persia launched in 2010 alongside the Disney film Prince of Persia: The Sands of Time, and it never got a second wave. The movie underperformed relative to its budget, LEGO didn't bring the theme back for 2011, and that locked the entire minifigure lineup into a single, permanently limited run.
That's actually good news if you're a collector or reseller looking at this theme today. A one-wave licensed theme means the pool of figures is fixed forever. Nobody is printing a new Dastan or a new Hassansin assassin. In my experience, that kind of hard cap is exactly what makes a niche theme worth tracking on BrickEconomy over the years, even when the individual figures aren't headline grabbers like a Star Wars or Marvel exclusive.
The whole theme consists of four sets, all released in 2010: The Ostrich Race (7570), The Fight for the Dagger (7571), Quest Against Time (7572), and Battle of Alamut (7573). If you're trying to complete the set or figure out what you have in a bulk lot, those four numbers are the entire universe you're working with.
Which LEGO Prince of Persia Minifigures Are Worth the Most Right Now?
The most valuable Prince of Persia minifigures right now are the Hassansin assassins, particularly Gool, the Scimitar Hassansin, which averages around $14 according to brick'em's pricing data. The Alamut Guards and Zolm, the Hassansin Leader, also sit in the $7 to $13 range, while the base Dastan figure is the cheapest at under $3.
Here's a snapshot of current average prices across the theme. I'm sharing these as approximate figures pulled from brick'em's database at the time of writing since secondhand prices move, so treat this as a starting point and verify current sold prices before you lock in an offer.
| Minifigure | BrickLink ID | Avg Price | Typical Range |
|---|---|---|---|
| Gool, Scimitar Hassansin | pop015 | $14.12 | $10.00 to $18.61 |
| Alamut Guard 2 | pop014 | $12.51 | $6.30 to $19.26 |
| Dastan, Shirtless with Scabbard | pop007 | $12.34 | $8.62 to $18.00 |
| Alamut Guard 1 | pop013 | $11.10 | $4.59 to $19.70 |
| Alamut Merchant | pop001 | $7.16 | $3.02 to $10.07 |
| Zolm, Hassansin Leader | pop012 | $6.90 | $2.70 to $13.01 |
| Princess Tamina | pop003 | $6.39 | $2.97 to $10.42 |
| Tamah, Razor Glove Hassansin | pop016 | $5.47 | $3.45 to $9.30 |
| Setam, Claw Hassansin | pop006 | $4.74 | $1.75 to $7.17 |
| Ghazab, Hatchet Hassansin | pop005 | $3.53 | $1.47 to $6.46 |
| Dastan, Scabbard | pop004 | $3.08 | $0.75 to $6.98 |
| Dastan (standard) | pop017 | $2.70 | $0.78 to $5.80 |
You can look up any of these figures, along with photos and variant details, in brick'em's LEGO minifigure database if you want to double check a specific piece before listing it.
Why Is Dastan the Cheapest Figure in the Theme?
Dastan is the cheapest Prince of Persia minifigure because he's also the most common. He appears in more sets and more variations than any other character, so supply outpaces demand for the base version, which averages under $3 in brick'em's data.
Not every Dastan is worth the same, though. The standard version with his scabbard piece averages around $2.70 to $3.08, but the shirtless variant with scabbard, which shows up in only one set, averages closer to $12.34. That's a big gap for what looks like the same character at a glance. When I sort through bulk lots, this is exactly the kind of detail that separates a $3 figure from a $12 figure, and it's easy to miss if you're moving fast.
If you're not sure which Dastan you're holding, torso printing and head sculpt are the fastest tells. I recommend photographing the figure from the front and side before you list it, since buyers on BrickLink and eBay will ask about the exact variant if the listing photo is unclear.
What Are the Hassansin Assassin Minifigures Worth?
The Hassansin assassins are the villain faction from Prince of Persia, and they're the most consistently valuable minifigures in the theme, averaging $3.53 to $14.12 depending on the character. Each Hassansin has a signature weapon printed into their design, which is a big part of why collectors chase specific ones.
Zolm, the Hassansin Leader, sits at the top of the leadership tier, averaging $6.90. Below him are four assassins named for their weapons: Ghazab (hatchet), Setam (claw), Tamah (razor glove), and Gool (scimitar). Gool is the standout here, averaging $14.12, which from what I've noticed usually comes down to strong demand from Assassin's Creed and video game crossover collectors as much as LEGO collectors specifically, since the Prince of Persia franchise overlaps with that audience.
If you're building a complete Hassansin set to sell as a group, I'd check each figure individually in the database rather than pricing the group off one number. A seller I know learned that lesson the hard way after underpricing a Gool figure inside a mixed lot because he assumed all four assassins were worth roughly the same.
How Much Are the Four Prince of Persia LEGO Sets Worth Today?
The four Prince of Persia sets range from about $40 to $132 in average resale value, with Battle of Alamut (7573) as the clear high end because it includes the most minifigures and the largest build. Smaller sets like The Ostrich Race (7570) sit closer to $40.
| Set | Number | Year | Avg Price | Typical Range |
|---|---|---|---|---|
| Battle of Alamut | 7573 | 2010 | $131.98 | $106.21 to $167.81 |
| The Fight for the Dagger | 7571 | 2010 | $67.59 | $58.60 to $79.21 |
| Quest Against Time | 7572 | 2010 | $47.49 | $40.00 to $59.27 |
| The Ostrich Race | 7570 | 2010 | $40.34 | $30.00 to $46.02 |
Battle of Alamut being worth roughly three times The Ostrich Race isn't just about part count. It's the set most Hassansin figures ship in, so buyers who want the assassins complete tend to buy the whole set rather than hunt figures individually. If you've got a sealed copy sitting around, it's worth running it through brick'em's LEGO collection value calculator to see where it lands against your other inventory.
Is Prince of Persia LEGO a Good Investment in 2026?
Heads up: This is not financial or legal advice. We're sharing what we've learned from the LEGO reselling community.
Prince of Persia LEGO can be a reasonable niche investment, but it's not a theme I'd call a slam dunk. It's a discontinued, one-wave license with a small, loyal following, which supports slow, steady appreciation rather than the kind of explosive growth you see in bigger licensed lines like Star Wars or Marvel.
In my view, the case for Prince of Persia comes down to scarcity plus a real fan base that spans both LEGO collectors and Assassin's Creed and Prince of Persia game fans. Sealed sets, especially Battle of Alamut, tend to hold up better long term than used ones, which lines up with what a lot of sellers I know have found across other retired themes too. Used sets generally lag sealed sets and rare minifigures on appreciation.
Before you treat this as a real investment position rather than a fun collecting niche, I'd pull current sold comps on BrickEconomy and cross-check against brick'em's pricing data. A lot of sellers I know use brick'em's LEGO investment calculator to model out appreciation scenarios on a specific set or figure before committing real money to a bulk buy.
Where Should You Buy or Sell Prince of Persia Minifigures?
BrickLink is the best place to buy or sell individual Prince of Persia minifigures because it's the deepest marketplace for piece-level LEGO trading and the closest thing the hobby has to a real pricing benchmark. eBay and Whatnot work better when you're moving a full set or a themed lot rather than a single figure.
I've sold plenty of niche theme figures over the years, and BrickLink is where I'd start for something like this. It's basically the Wall Street of LEGO for figuring out what a specific variant is actually worth, and buyers there already know what they're looking at, so you don't have to educate them on why the shirtless Dastan costs more than the regular one.
eBay is stronger when you want maximum eyeballs on a complete set like Battle of Alamut, since it puts the listing in front of a much bigger, more casual buyer pool. Whatnot can work too, especially if you already run shows with a nostalgia or retired-theme audience, though a narrow theme like this will sell better folded into a broader LEGO show than as its own dedicated stream. Facebook Marketplace and Mercari are worth checking locally if someone's clearing out an old collection, since sellers there often don't realize what a complete Prince of Persia lot is worth and price it well under market.
How Do You Spot Dastan Variants and Avoid Overpaying?
You can tell Prince of Persia minifigure variants apart by checking torso printing, whether the figure includes the scabbard accessory, and head sculpt details, since these differences are exactly what separates a $3 figure from a $12 one in this theme.
- Check the torso print closely. Shirtless versus clothed is the single biggest price driver for Dastan.
- Confirm accessories are present. A missing scabbard or weapon piece can cut resale value significantly.
- Compare head sculpts against reference photos, since Hassansin figures can look similar at a glance but carry different values.
- Look up the exact BrickLink ID before pricing anything, rather than pricing off the character name alone.
- Photograph front and back before listing so buyers can confirm the variant themselves.
When I sort through a bulk lot that might include Prince of Persia pieces, I run anything I'm unsure about through brick'em's scanner first rather than guessing off memory. If you're regularly buying lots that could include incomplete sets, brick'em's haul calculator is worth using to estimate what a whole box is worth before you commit to buying it.
Frequently Asked Questions
Is LEGO Prince of Persia still sold new?
No. LEGO Prince of Persia was a one-wave theme released only in 2010 and was discontinued after that year. All four sets, 7570 through 7573, are retired, so the only way to get them today is on the secondhand market through places like BrickLink, eBay, or Facebook Marketplace.
What is the rarest LEGO Prince of Persia minifigure?
Based on brick'em's current pricing data, Gool, the Scimitar Hassansin, is the most valuable at around $14 average, followed closely by the shirtless Dastan variant and the Alamut Guards. Rarity in this theme tracks closely with which single set a figure appeared in.
Why do Dastan prices vary so much?
Dastan prices vary because there are multiple torso and accessory variants sharing the same character name. The common version with scabbard averages under $3, while the shirtless version from a single set averages over $12, so the specific variant matters far more than the character.
Should I buy Prince of Persia sets sealed or used?
If you're buying for potential appreciation, sealed generally holds value better than used, which matches the broader pattern across most retired LEGO themes. If you mainly want the minifigures for a collection or to complete a display, a well cared for used set can be the more cost effective route.
Where can I check current Prince of Persia minifigure prices?
Brick'em's LEGO minifigure database pulls current BrickLink-integrated pricing so you can look up any Prince of Persia figure by name and see average, low, and high prices before you buy or sell. Cross checking with BrickEconomy is a good second opinion for sold comps.
.png)
