brick'em
Sign inStart free
The Goonies

The Goonies

21363-1·Twilight·2025·13 minifigs·741 parts

Used Avg
$275.00
New Avg
$269.78
Add to your inventoryScan the minifigs

About The Goonies

The Goonies (21363-1) is a LEGO Twilight set released in 2025, currently averaging $275.00 used on BrickLink. It comes with 13 minifigures worth a combined $142.27. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 741 pieces.

Part-out value

Minifig value: $142.27 out of $275.00 total (52%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • One-Eyed Willie ($25.90) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • 13 minifigures at $142.27 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
  • 741 parts makes this a substantial set. If selling used, confirm completeness before listing — incomplete large sets sell at a steep discount. Use the parts list on this page to check.

Minifigures in The Goonies (13)

Skeleton - Standard Skull, Bent Arms Horizontal Grip, Single Leg
Skeleton - Standard Skull, Bent Arms Horizontal Grip, Single Leg
bdp169$1.48
Michael Walsh (Mikey)
Michael Walsh (Mikey)
idea258$8.04
Lotney Fratelli (Sloth)
Lotney Fratelli (Sloth)
idea259$19.05
Mama Fratelli
Mama Fratelli
idea260$16.77
Brandon Walsh (Brand)
Brandon Walsh (Brand)
idea261$11.12
Stephanie Steinbrenner (Stef)
Stephanie Steinbrenner (Stef)
idea262$7.55
Lawrence Cohen (Chunk)
Lawrence Cohen (Chunk)
idea263$10.01
Clark Devereaux (Mouth)
Clark Devereaux (Mouth)
idea264$9.81
Richard Wang (Data)
Richard Wang (Data)
idea265$10.88
Jake Fratelli
Jake Fratelli
idea266$7.69
Francis Fratelli
Francis Fratelli
idea267$4.73
Andrea Theresa Carmichael (Andy)
Andrea Theresa Carmichael (Andy)
idea268$9.25
One-Eyed Willie
One-Eyed Willie
idea269$25.90

Parts (741)

Minifigure, Utensil Sack / Bag with Handle
Minifigure, Utensil Sack / Bag with Handle
Minifigure, Weapon Bladed Claw, Spread
Minifigure, Weapon Bladed Claw, Spread
×3
Tile, Modified 2 x 2 Inverted
Tile, Modified 2 x 2 Inverted
×2
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
×2
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
×4
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
×2
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
×5
Plate 3 x 3
Plate 3 x 3
×2
Plate 3 x 3
Plate 3 x 3
Plate 3 x 3
Plate 3 x 3
×6
Technic, Axle 1L with Pin 2L with Friction Ridges
Technic, Axle 1L with Pin 2L with Friction Ridges
Minifigure Footgear Roller Skate
Minifigure Footgear Roller Skate
×3
Tile, Round 1 x 2 Oval
Tile, Round 1 x 2 Oval
×3
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Cloth Sail 24 x 16 Tattered with Vertical Slit (Main Sail)
Cloth Sail 24 x 16 Tattered with Vertical Slit (Main Sail)
Cloth Sail 21 x 8 Tattered (Mizzen Sail)
Cloth Sail 21 x 8 Tattered (Mizzen Sail)
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×8
Cone 1 x 1 Inverted with Bar
Cone 1 x 1 Inverted with Bar
×2
Plate, Round 4 x 4 with 2 x 2 Round Open Center
Plate, Round 4 x 4 with 2 x 2 Round Open Center
Slope, Curved 4 x 1 Inverted
Slope, Curved 4 x 1 Inverted
×2
Wedge 2 x 2 (Slope 45 Corner)
Wedge 2 x 2 (Slope 45 Corner)
×30
Wedge 2 x 2 (Slope 45 Corner)
Wedge 2 x 2 (Slope 45 Corner)
Cattle Horn, Long
Cattle Horn, Long
×2
Arch 1 x 3 x 3
Arch 1 x 3 x 3
×3
Brick 1 x 1 x 3
Brick 1 x 1 x 3
×2
Brick 1 x 1 x 3
Brick 1 x 1 x 3
Brick 1 x 1 x 3
Brick 1 x 1 x 3
×5
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
×3
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
×2
Tile 2 x 2 Corner
Tile 2 x 2 Corner
×2
Tile 2 x 2 Corner
Tile 2 x 2 Corner
×3
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Plate, Modified 1 x 1 with Tooth Vertical
Plate, Modified 1 x 1 with Tooth Vertical
Technic, Pin with Friction Ridges and Pin Hole
Technic, Pin with Friction Ridges and Pin Hole
Plate, Modified 3 x 3 Cross
Plate, Modified 3 x 3 Cross
Brick, Modified 1 x 4 with Masonry Profile
Brick, Modified 1 x 4 with Masonry Profile
Tile, Round 2 x 2 with Hole
Tile, Round 2 x 2 with Hole
×3
Slope 45 2 x 1 Triple with Bottom Stud Holder
Slope 45 2 x 1 Triple with Bottom Stud Holder
×4
Slope 45 2 x 1 Triple with Bottom Stud Holder
Slope 45 2 x 1 Triple with Bottom Stud Holder
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×7
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 1 x 1 with Open O Clip
×13
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 1 x 1 with Open O Clip
×17
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 1 x 1 with Open O Clip
×4
Minifigure, Weapon Sword, Cutlass / Saber with Large Hilt and Oval Guard
Minifigure, Weapon Sword, Cutlass / Saber with Large Hilt and Oval Guard
×2
Plate, Round 1 x 2 Half with 1 Stud (Jumper)
Plate, Round 1 x 2 Half with 1 Stud (Jumper)
×4
Slope, Curved 2 x 2 Inverted with 2 Recessed Studs
Slope, Curved 2 x 2 Inverted with 2 Recessed Studs
Large Figure Hand Left, Super Mario Fist with Bar
Large Figure Hand Left, Super Mario Fist with Bar
Technic, Liftarm Thick 1 x 1 (Spacer)
Technic, Liftarm Thick 1 x 1 (Spacer)
×3
Tile, Round 2 x 2 with Open Stud
Tile, Round 2 x 2 with Open Stud
Tile, Round 2 x 2 with Open Stud
Tile, Round 2 x 2 with Open Stud
Plate, Modified 1 x 2 with Pin Hole on Bottom
Plate, Modified 1 x 2 with Pin Hole on Bottom
×3
Plate, Modified 1 x 2 with Pin Hole on Bottom
Plate, Modified 1 x 2 with Pin Hole on Bottom
×4
Minifigure, Utensil Ice Axe - 3-Rib Handle
Minifigure, Utensil Ice Axe - 3-Rib Handle
×2
Technic, Gear 16 Tooth with Clutch on Both Sides
Technic, Gear 16 Tooth with Clutch on Both Sides
Plant Grass Stem / Horn, Spiral Curve
Plant Grass Stem / Horn, Spiral Curve
×4
Brick, Modified 1 x 1 with Scroll with Hollow Stud
Brick, Modified 1 x 1 with Scroll with Hollow Stud
×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×3
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×3
Sticker Sheet for Set 21363 - (10114111/6551530)
Sticker Sheet for Set 21363 - (10114111/6551530)
Tile, Modified 2 x 3 Pentagonal
Tile, Modified 2 x 3 Pentagonal
Tile, Modified 2 x 3 Pentagonal
Tile, Modified 2 x 3 Pentagonal
×2
Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid
Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid
×2
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
×4
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Brick 1 x 2 x 3
Brick 1 x 2 x 3
Brick 1 x 2 x 3
Brick 1 x 2 x 3
Plate, Round Half 4 x 8
Plate, Round Half 4 x 8
Slope, Inverted 45 2 x 1 with 2/3 Cutout
Slope, Inverted 45 2 x 1 with 2/3 Cutout
Slope, Inverted 45 2 x 1 with 2/3 Cutout
Slope, Inverted 45 2 x 1 with 2/3 Cutout
×4
Slope, Inverted 45 2 x 1 with 2/3 Cutout
Slope, Inverted 45 2 x 1 with 2/3 Cutout
×8
Arch 1 x 5 x 4 - Continuous Bow
Arch 1 x 5 x 4 - Continuous Bow
×2
Slope, Inverted 45 3 x 1 Double
Slope, Inverted 45 3 x 1 Double
Slope, Inverted 45 3 x 1 Double
Slope, Inverted 45 3 x 1 Double
Bar Holder with Handle
Bar Holder with Handle
Brick 2 x 2 Corner
Brick 2 x 2 Corner
×16
Brick 2 x 2 Corner
Brick 2 x 2 Corner
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×10
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×6
Plate 2 x 2 Corner
Plate 2 x 2 Corner
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×14
Slope, Curved 2 x 1 x 2/3 Inverted
Slope, Curved 2 x 1 x 2/3 Inverted
×6
Slope, Curved 2 x 1 x 2/3 Inverted
Slope, Curved 2 x 1 x 2/3 Inverted
×4
Slope, Curved 2 x 1 x 2/3 Inverted
Slope, Curved 2 x 1 x 2/3 Inverted
×2
Tile, Round 1 x 1 Half Circle Extended
Tile, Round 1 x 1 Half Circle Extended
×3
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Hinge Plate 1 x 4 Swivel (2429 / 2430)
×3
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Wedge, Plate 2 x 2 Right
Wedge, Plate 2 x 2 Right
Tile 1 x 4
Tile 1 x 4
Tile 1 x 4
Tile 1 x 4
×3
Tile 1 x 4
Tile 1 x 4
×4
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4
Tile 1 x 4
×13
Plate 2 x 12
Plate 2 x 12
Plate 2 x 12
Plate 2 x 12
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×3
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×6
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×7
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 3 Cut Corner
×4
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 3 Cut Corner
Brick 1 x 1 x 5 - Solid Stud
Brick 1 x 1 x 5 - Solid Stud
Brick 1 x 2 x 5
Brick 1 x 2 x 5
×2
Brick 2 x 6
Brick 2 x 6
Brick 2 x 6
Brick 2 x 6
×4
Brick 2 x 6
Brick 2 x 6
×5
Brick 2 x 6
Brick 2 x 6
×3
Container, Barrel 2 x 2 x 2
Container, Barrel 2 x 2 x 2
×3
Minifigure, Headgear Hat, Flat Cap
Minifigure, Headgear Hat, Flat Cap
Minifigure Backpack Non-Opening
Minifigure Backpack Non-Opening
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×11
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×4
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×2
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×2
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×7
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
×6
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Technic, Axle Connector 3L
Technic, Axle Connector 3L
Hose, Flexible 21L with 2 Connector Ends and Rope Climbing Grips
Hose, Flexible 21L with 2 Connector Ends and Rope Climbing Grips
×2
Plate 4 x 4 Corner
Plate 4 x 4 Corner
Wedge, Plate 2 x 2 Cut Corner
Wedge, Plate 2 x 2 Cut Corner
×2
Tile 2 x 3
Tile 2 x 3
×2
Tile 2 x 3
Tile 2 x 3
×5
Tile 2 x 3
Tile 2 x 3
×12
Tile 2 x 3 with Treasure Map, Dark Tan Writing Lines, Dark Red Compass Rose, Medium Nougat Skull, Land Outline and Border Pattern
Tile 2 x 3 with Treasure Map, Dark Tan Writing Lines, Dark Red Compass Rose, Medium Nougat Skull, Land Outline and Border Pattern
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
Tile, Round Corner 4 x 4 Macaroni
Tile, Round Corner 4 x 4 Macaroni
Tile, Round Corner 4 x 4 Macaroni
Tile, Round Corner 4 x 4 Macaroni
Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube
Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×12
Tile, Round Corner 2 x 2 Macaroni
Tile, Round Corner 2 x 2 Macaroni
Technic, Axle and Pin Connector Hub with 2 Axles on Opposite Sides
Technic, Axle and Pin Connector Hub with 2 Axles on Opposite Sides
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
×2
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
×2
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
×3
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
×11
Minifigure Neck Bracket with Back Stud - Thick Back Wall
Minifigure Neck Bracket with Back Stud - Thick Back Wall
Minifigure Neck Bracket with Back Stud - Thick Back Wall
Minifigure Neck Bracket with Back Stud - Thick Back Wall
Wedge 2 x 1 x 2/3 Left
Wedge 2 x 1 x 2/3 Left
Brick 2 x 4
Brick 2 x 4
×2
Brick 2 x 4
Brick 2 x 4
×3
Brick 2 x 4
Brick 2 x 4
×4
Brick 2 x 4
Brick 2 x 4
Brick 2 x 3
Brick 2 x 3
×12
Brick 2 x 3
Brick 2 x 3
×5
Brick 2 x 3
Brick 2 x 3
×5
Brick 2 x 2
Brick 2 x 2
×2
Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
×3
Brick 2 x 2
Brick 2 x 2
Brick 1 x 2
Brick 1 x 2
×35
Brick 1 x 2
Brick 1 x 2
×4
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
×8
Brick 1 x 2
Brick 1 x 2
×4
Brick 1 x 1
Brick 1 x 1
Brick 1 x 1
Brick 1 x 1
×9
Brick 1 x 1
Brick 1 x 1
×20
Brick 1 x 1
Brick 1 x 1
×31
Brick 2 x 10
Brick 2 x 10
Brick 1 x 8
Brick 1 x 8
×2
Brick 1 x 8
Brick 1 x 8
Brick 1 x 6
Brick 1 x 6
Brick 1 x 6
Brick 1 x 6
×16
Brick 1 x 6
Brick 1 x 6
×2
Brick 1 x 6
Brick 1 x 6
×9
Brick 1 x 6
Brick 1 x 6
×6
Brick 1 x 4
Brick 1 x 4
×21
Brick 1 x 4
Brick 1 x 4
×8
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
×9
Brick 1 x 4
Brick 1 x 4
×3
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
×6
Brick 2 x 2 x 3
Brick 2 x 2 x 3
Rock 1 x 1 Jewel 24 Facet
Rock 1 x 1 Jewel 24 Facet
×2
Minifigure, Utensil Binoculars Town
Minifigure, Utensil Binoculars Town
×5
Plate 2 x 4
Plate 2 x 4
×4
Plate 2 x 4
Plate 2 x 4
×7
Plate 2 x 4
Plate 2 x 4
×5
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 4
Plate 2 x 4
×3
Plate 2 x 4
Plate 2 x 4
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 3
Plate 2 x 3
×6
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
×3
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 3
Plate 2 x 3
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
×9
Plate 2 x 2
Plate 2 x 2
×3
Plate 2 x 2
Plate 2 x 2
×6
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
×5
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×4
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×29
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
×70
Plate 1 x 2
Plate 1 x 2
×7
Plate 1 x 2
Plate 1 x 2
×23
Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)
Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)
Plate 1 x 1
Plate 1 x 1
×5
Plate 1 x 1
Plate 1 x 1
×3
Plate 1 x 1
Plate 1 x 1
×3
Plate 1 x 1
Plate 1 x 1
×12
Plate 1 x 1
Plate 1 x 1
×12
Plate 1 x 1
Plate 1 x 1
×15
Plate 1 x 1
Plate 1 x 1
×44
Plate 1 x 1
Plate 1 x 1
×15
Plate 1 x 1
Plate 1 x 1
×2
Plate 6 x 12
Plate 6 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 10
Plate 4 x 10
×2
Plate 4 x 10
Plate 4 x 10
Plate 4 x 10
Plate 4 x 10
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 4
Plate 4 x 4
Plate 4 x 6
Plate 4 x 6
Plate 4 x 6
Plate 4 x 6
×2
Plate 4 x 6
Plate 4 x 6
×3
Plate 4 x 6
Plate 4 x 6
Plate 2 x 8
Plate 2 x 8
Plate 2 x 8
Plate 2 x 8
×2
Plate 2 x 8
Plate 2 x 8
Plate 2 x 8
Plate 2 x 8
Plate 4 x 8
Plate 4 x 8
×11
Plate, Round Corner 3 x 3
Plate, Round Corner 3 x 3
×2
Plate, Round Corner 3 x 3
Plate, Round Corner 3 x 3
×3
Plate 6 x 8
Plate 6 x 8
×2
Slope 45 2 x 4
Slope 45 2 x 4
Bar 4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Arm Mechanical, Battle Droid
Arm Mechanical, Battle Droid
×2
Slope 45 2 x 2
Slope 45 2 x 2
×2
Slope 45 2 x 2
Slope 45 2 x 2
Slope 45 2 x 1
Slope 45 2 x 1
×2
Slope 45 2 x 1
Slope 45 2 x 1
×11
Slope 45 2 x 1
Slope 45 2 x 1
×14
Slope 45 2 x 1
Slope 45 2 x 1
×14
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×2
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×5
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×8
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×2
Wedge, Plate 4 x 4 Cut Corner
Wedge, Plate 4 x 4 Cut Corner
×2
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
×2
Brick, Round 1 x 1
Brick, Round 1 x 1
×19
Brick, Round 1 x 1
Brick, Round 1 x 1
×4
Brick, Round 1 x 1
Brick, Round 1 x 1
×3
Brick, Round 1 x 1
Brick, Round 1 x 1
×2
Brick, Round 1 x 1
Brick, Round 1 x 1
×2
Brick, Round 1 x 1
Brick, Round 1 x 1
×4
Brick 1 x 2 without Bottom Tube
Brick 1 x 2 without Bottom Tube
×4
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
×2
Tile 2 x 2 with Red and Green Stripes and Dark Green 'PIZZA' Pattern (Pizza Box)
Tile 2 x 2 with Red and Green Stripes and Dark Green 'PIZZA' Pattern (Pizza Box)
Tile 1 x 2
Tile 1 x 2
×5
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
×4
Tile 1 x 2
Tile 1 x 2
×2
Tile 1 x 2
Tile 1 x 2
×15
Tile 1 x 2
Tile 1 x 2
×5
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
×2
Tile 1 x 2 with Candy Bar Chocolate Blocks and Gold Bow Pattern
Tile 1 x 2 with Candy Bar Chocolate Blocks and Gold Bow Pattern
Tile 1 x 2 with Medium Azure 'Guble Bubble', White Number 8 in Green Circle, and Bright Pink Bubble with Face Pattern
Tile 1 x 2 with Medium Azure 'Guble Bubble', White Number 8 in Green Circle, and Bright Pink Bubble with Face Pattern
Tile 1 x 2 with Copper Skull with Teeth on Dark Brown Background Pattern (The Goonies Copper Bones Skeleton Key)
Tile 1 x 2 with Copper Skull with Teeth on Dark Brown Background Pattern (The Goonies Copper Bones Skeleton Key)
Tile 1 x 2 with Currency / Money, 100 Bill / Note Pattern
Tile 1 x 2 with Currency / Money, 100 Bill / Note Pattern
Tile 1 x 1
Tile 1 x 1
×6
Tile 1 x 1
Tile 1 x 1
×3
Tile 1 x 1
Tile 1 x 1
×4
Tile 1 x 1
Tile 1 x 1
×8
Tile 1 x 1
Tile 1 x 1
×4
Tile 1 x 1
Tile 1 x 1
×2
Plate, Modified 2 x 3 with Hole
Plate, Modified 2 x 3 with Hole
×2
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
×3
Technic, Pin 3/4
Technic, Pin 3/4
×3
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
×4
Technic, Axle and Pin Connector Angled #6 - 90 degrees
Technic, Axle and Pin Connector Angled #6 - 90 degrees
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
×2
Technic, Liftarm Thin 1 x 5
Technic, Liftarm Thin 1 x 5
Technic, Brick 1 x 14 with Holes
Technic, Brick 1 x 14 with Holes
×3
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Technic, Axle and Pin Connector Angled #2 - 180 degrees
×2
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Technic, Axle and Pin Connector Angled #2 - 180 degrees
×4
Technic, Axle Connector with Axle Hole
Technic, Axle Connector with Axle Hole
Wedge, Plate 4 x 6 Cut Corners
Wedge, Plate 4 x 6 Cut Corners
Technic, Axle 2L Notched
Technic, Axle 2L Notched
×20
Technic, Axle 2L Notched
Technic, Axle 2L Notched
×5
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
×4
Technic, Axle 5L
Technic, Axle 5L
Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
Technic, Gear 20 Tooth Double Bevel
Technic, Gear 20 Tooth Double Bevel
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
×3
Technic Ball Joint
Technic Ball Joint
×3
Technic Ball Joint
Technic Ball Joint
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Pin 3L without Friction Ridges
Technic, Pin 3L without Friction Ridges
×2
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with 1 x 1 Round Plate with Hollow Stud
×2
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with 1 x 1 Round Plate with Hollow Stud
×3
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with 1 x 1 Round Plate with Hollow Stud
×4
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with 1 x 1 Round Plate with Hollow Stud
×3
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×9
Slope 33 3 x 2
Slope 33 3 x 2
Cone 1 1/2 x 1 1/2 x 2/3 Truncated
Cone 1 1/2 x 1 1/2 x 2/3 Truncated
×4
Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side
Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side
×8
Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side
Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side
×4
Tile, Modified 2 x 2 with Studs on Edge
Tile, Modified 2 x 2 with Studs on Edge
×14
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
×4
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
×2
Plate 1 x 8
Plate 1 x 8
×3
Plate 1 x 8
Plate 1 x 8
×6
Plate 1 x 8
Plate 1 x 8
×2
Tile, Modified 1 x 3 Inverted with Hole
Tile, Modified 1 x 3 Inverted with Hole
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Slope, Curved 1 x 2 x 2/3 Double
Slope, Curved 1 x 2 x 2/3 Double
Slope, Curved 4 x 1 x 1 2/3
Slope, Curved 4 x 1 x 1 2/3
×2
Slope, Curved 4 x 1 x 1 2/3
Slope, Curved 4 x 1 x 1 2/3
×5
Tile, Modified 2 x 2 Triangular
Tile, Modified 2 x 2 Triangular
Brick 1 x 3
Brick 1 x 3
×25
Brick 1 x 3
Brick 1 x 3
×7
Plate 1 x 3
Plate 1 x 3
×10
Plate 1 x 3
Plate 1 x 3
×8
Plate 1 x 3
Plate 1 x 3
Plate 1 x 3
Plate 1 x 3
×9
Plate 1 x 3
Plate 1 x 3
Minifigure, Head (Plain)
Minifigure, Head (Plain)
Minifigure, Head with Black Standard Skull Pattern
Minifigure, Head with Black Standard Skull Pattern
×2
Technic, Gear 24 Tooth with 1 Axle Hole
Technic, Gear 24 Tooth with 1 Axle Hole
×3
Arch 1 x 4
Arch 1 x 4
Arch 1 x 4
Arch 1 x 4
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×3
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×17
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×2
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×5
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
Plate 1 x 6
Plate 1 x 6
×5
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
×3
Plate 1 x 6
Plate 1 x 6
×8
Plate 1 x 6
Plate 1 x 6
×4
Plate 1 x 6
Plate 1 x 6
×18
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×2
Minifigure, Utensil Wand, 2 on Sprue
Minifigure, Utensil Wand, 2 on Sprue
×2
Bracket 1 x 1 - 1 x 1 Inverted
Bracket 1 x 1 - 1 x 1 Inverted
×3
Bracket 1 x 1 - 1 x 1 Inverted
Bracket 1 x 1 - 1 x 1 Inverted
×2
Bracket 1 x 1 - 1 x 1
Bracket 1 x 1 - 1 x 1
×6
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×3
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×7
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×14
Technic, Brick 1 x 8 with Holes
Technic, Brick 1 x 8 with Holes
Technic, Axle 4L
Technic, Axle 4L
×3
Technic, Axle 4L
Technic, Axle 4L
×2
Plate 1 x 4
Plate 1 x 4
×3
Plate 1 x 4
Plate 1 x 4
×10
Plate 1 x 4
Plate 1 x 4
×6
Plate 1 x 4
Plate 1 x 4
×7
Plate 1 x 4
Plate 1 x 4
×22
Plate 1 x 4
Plate 1 x 4
×4
Technic Bush
Technic Bush
×2
Technic Bush
Technic Bush
×3
Slope, Curved 1 x 2 with Bottom Stud Holder
Slope, Curved 1 x 2 with Bottom Stud Holder
×2
Technic, Axle 10L
Technic, Axle 10L
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
×4
Plant Stem with Bar, 3 Leaves, and Small Pin Hole
Plant Stem with Bar, 3 Leaves, and Small Pin Hole
×3
Minifigure, Utensil Candle
Minifigure, Utensil Candle
Wave Rounded Straight Single with Small Pin End (Candle Flame)
Wave Rounded Straight Single with Small Pin End (Candle Flame)
×3
Minifigure, Utensil Lantern
Minifigure, Utensil Lantern
Minifigure, Utensil Lantern
Minifigure, Utensil Lantern
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×7
Plate 2 x 10
Plate 2 x 10
×3
Plate 2 x 10
Plate 2 x 10
Pane for Window 1 x 2 x 2 Lattice Diamond
Pane for Window 1 x 2 x 2 Lattice Diamond
×2
Pane for Window 1 x 2 x 2 Lattice Diamond
Pane for Window 1 x 2 x 2 Lattice Diamond
×7
Minifigure, Utensil Hairbrush - 10mm Handle
Minifigure, Utensil Hairbrush - 10mm Handle
Minifigure, Utensil Tea Saucer with Hollow Stud
Minifigure, Utensil Tea Saucer with Hollow Stud
×5
Minifigure, Utensil Tea Saucer with Hollow Stud
Minifigure, Utensil Tea Saucer with Hollow Stud
×3
Minifigure, Utensil Cup
Minifigure, Utensil Cup
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2
Cylinder Quarter 4 x 4 x 3
Cylinder Quarter 4 x 4 x 3
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×8
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×19
Plate, Round 1 x 1
Plate, Round 1 x 1
×9
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×29
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×14
Plate, Round 1 x 1
Plate, Round 1 x 1
×28
Plate, Round 1 x 1
Plate, Round 1 x 1
×36
Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
×4
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
×2
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×3
Tile 1 x 8
Tile 1 x 8
×6
Tile 1 x 8
Tile 1 x 8
×7
Bracket 2 x 2 - 1 x 2 Centered
Bracket 2 x 2 - 1 x 2 Centered
Bracket 2 x 2 - 1 x 2 Centered
Bracket 2 x 2 - 1 x 2 Centered
×6
Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
×3
Wedge 6 x 2 Right
Wedge 6 x 2 Right
×3
Wedge 6 x 2 Right
Wedge 6 x 2 Right
Wedge 6 x 2 Left
Wedge 6 x 2 Left
×3
Wedge 6 x 2 Left
Wedge 6 x 2 Left
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×2
Plate, Round 8 x 8 Rounded End
Plate, Round 8 x 8 Rounded End
Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
×2
Technic Bush 1/2 Smooth
Technic Bush 1/2 Smooth
×2
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×12
Plate 2 x 16
Plate 2 x 16
Slope 33 3 x 1
Slope 33 3 x 1
×3
Slope, Inverted 33 3 x 1
Slope, Inverted 33 3 x 1
×2
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
×2
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
×2
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
Technic, Axle 1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×3
Wedge 4 x 4 (Slope 18 Corner)
Wedge 4 x 4 (Slope 18 Corner)
×4
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
×2
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
×2
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
×2
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Hinge Plate 1 x 2 Locking with 2 Fingers on End
×4
Technic, Axle and Pin Connector Angled #7 - 168.75 degrees
Technic, Axle and Pin Connector Angled #7 - 168.75 degrees
Slope 75 2 x 1 x 3 - Hollow Stud
Slope 75 2 x 1 x 3 - Hollow Stud
×9
Slope 75 2 x 1 x 3 - Hollow Stud
Slope 75 2 x 1 x 3 - Hollow Stud
×12
Minifigure, Weapon Knives, 2 on Sprue
Minifigure, Weapon Knives, 2 on Sprue
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
×11
Plate 1 x 10
Plate 1 x 10
Plate 1 x 10
Plate 1 x 10
×7
Plate 1 x 10
Plate 1 x 10
Plate, Modified 1 x 2 with Open O Clip on Top
Plate, Modified 1 x 2 with Open O Clip on Top
×8
Plate, Modified 1 x 2 with Open O Clip on Top
Plate, Modified 1 x 2 with Open O Clip on Top
×3
Arch 1 x 3
Arch 1 x 3
Technic, Axle 3L
Technic, Axle 3L
×2
Technic, Axle 3L
Technic, Axle 3L
×4
Technic, Axle Connector Double - Flexible Rubber
Technic, Axle Connector Double - Flexible Rubber
×2
Slope 10 6 x 1
Slope 10 6 x 1
×4
Slope 10 6 x 1
Slope 10 6 x 1
×7
Bracket 1 x 2 - 2 x 1 Centered
Bracket 1 x 2 - 2 x 1 Centered
×2
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×41
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×2
Tap 1 x 1 without Hole in Nozzle End
Tap 1 x 1 without Hole in Nozzle End
×2
Tap 1 x 1 without Hole in Nozzle End
Tap 1 x 1 without Hole in Nozzle End
×3
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
×5
Brick, Modified 1 x 1 with Studs on 4 Sides
Brick, Modified 1 x 1 with Studs on 4 Sides
×4
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Boat, Ship's Wheel with Slotted Pin
Boat, Ship's Wheel with Slotted Pin
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×2
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×3
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×2
Wedge, Plate 8 x 3 Pentagonal Left
Wedge, Plate 8 x 3 Pentagonal Left
×2
Panel 6 x 5 x 3 1/3 Curved Top
Panel 6 x 5 x 3 1/3 Curved Top
×8
Plate, Modified 2 x 2 with Bar on Bottom
Plate, Modified 2 x 2 with Bar on Bottom
Plate, Modified 2 x 2 with Bar on Bottom
Plate, Modified 2 x 2 with Bar on Bottom
×8
Tile, Modified 1 x 2 Wedge Left
Tile, Modified 1 x 2 Wedge Left
×3
Tile, Modified 1 x 2 Wedge Left
Tile, Modified 1 x 2 Wedge Left
×7
Tile, Modified 1 x 2 Wedge Left
Tile, Modified 1 x 2 Wedge Left
×3
Tile, Modified 1 x 2 Wedge Right
Tile, Modified 1 x 2 Wedge Right
Tile, Modified 1 x 2 Wedge Right
Tile, Modified 1 x 2 Wedge Right
×2
Tile, Modified 1 x 2 Wedge Right
Tile, Modified 1 x 2 Wedge Right
×3
Tile, Modified 1 x 2 Wedge Right
Tile, Modified 1 x 2 Wedge Right
×3
Slope, Curved 3 x 1
Slope, Curved 3 x 1
Wedge 10 x 3 Right
Wedge 10 x 3 Right
Wedge, Plate 2 x 4
Wedge, Plate 2 x 4
Brick, Modified 1 x 2 with Studs on 2 Sides
Brick, Modified 1 x 2 with Studs on 2 Sides
×11
Barb / Claw / Horn / Tooth - Small
Barb / Claw / Horn / Tooth - Small
×4
Slope 18 2 x 1 x 2/3
Slope 18 2 x 1 x 2/3
×2
Slope 18 2 x 1 x 2/3
Slope 18 2 x 1 x 2/3
×5
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×2
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×4
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×25
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×12
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×13
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
×2
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
Door 1 x 4 x 6 with Window and Stud Handle
Door 1 x 4 x 6 with Window and Stud Handle
Slope 14 4 x 1
Slope 14 4 x 1
×4
Slope, Curved 2 x 1 with Recessed Stud
Slope, Curved 2 x 1 with Recessed Stud
×4
Slope, Curved 2 x 1 with Recessed Stud
Slope, Curved 2 x 1 with Recessed Stud
Arch 1 x 5 x 3 1/3 Curved Top
Arch 1 x 5 x 3 1/3 Curved Top
×2
Arch 1 x 5 x 3 1/3 Curved Top
Arch 1 x 5 x 3 1/3 Curved Top
×2
Arch 1 x 3 x 2 with Flat End
Arch 1 x 3 x 2 with Flat End
×20
Slope, Curved 2 x 1 x 1 2/3
Slope, Curved 2 x 1 x 1 2/3
Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
×2
Panel 1 x 6 x 5
Panel 1 x 6 x 5
×4
Plate, Round Corner 6 x 6
Plate, Round Corner 6 x 6
Torso Skeleton, Rounded Rib Cage and Thick Shoulder Pins
Torso Skeleton, Rounded Rib Cage and Thick Shoulder Pins
×2
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Slope 18 4 x 1
Slope 18 4 x 1
×3
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
×8
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
×2
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
×12
Plate 1 x 12
Plate 1 x 12
Plate 1 x 12
Plate 1 x 12
×4
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×2
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×9
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×11
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Window 1 x 2 x 2 Flat Front
Window 1 x 2 x 2 Flat Front
×2
Window 1 x 2 x 2 Flat Front
Window 1 x 2 x 2 Flat Front
×7
Window 1 x 4 x 3 - No Shutter Tabs
Window 1 x 4 x 3 - No Shutter Tabs
Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
Glass for Window 1 x 2 x 2 Flat Front
Glass for Window 1 x 2 x 2 Flat Front
×2
Glass for Window 1 x 2 x 2 Flat Front
Glass for Window 1 x 2 x 2 Flat Front
Minifigure, Utensil Hose Nozzle Elaborate
Minifigure, Utensil Hose Nozzle Elaborate
×3
Wedge, Plate 6 x 6 Cut Corner
Wedge, Plate 6 x 6 Cut Corner
×4
Brick 1 x 10
Brick 1 x 10
Brick 1 x 10
Brick 1 x 10
Brick 1 x 12
Brick 1 x 12
×4
Slope, Curved 4 x 1
Slope, Curved 4 x 1
Slope, Curved 4 x 1
Slope, Curved 4 x 1
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
×2
Bar 1 x 4 x 3 Grille with End Protrusions
Bar 1 x 4 x 3 Grille with End Protrusions
Slope, Curved 3 x 2 with 4 Studs
Slope, Curved 3 x 2 with 4 Studs
×3
Panel 1 x 1 x 1 Corner
Panel 1 x 1 x 1 Corner
Panel 1 x 1 x 1 Corner
Panel 1 x 1 x 1 Corner
Vehicle, Mudguard 1 1/2 x 6 x 1 with Arch
Vehicle, Mudguard 1 1/2 x 6 x 1 with Arch
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Leg Skeleton
Leg Skeleton
×2
Tile 1 x 3
Tile 1 x 3
×10
Tile 1 x 3
Tile 1 x 3
Tile 1 x 3
Tile 1 x 3
×12
Tile 1 x 3
Tile 1 x 3
×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×4
Technic, Axle and Pin Connector Perpendicular Triple
Technic, Axle and Pin Connector Perpendicular Triple
Technic, Axle and Pin Connector Perpendicular Triple
Technic, Axle and Pin Connector Perpendicular Triple
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
×3
Minifigure, Utensil Telescope
Minifigure, Utensil Telescope
Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin
Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin
×3
Vehicle, Trailer Base 6 x 16 x 2 2/3 with 8 Holes (Train Base Half Split-Level)
Vehicle, Trailer Base 6 x 16 x 2 2/3 with 8 Holes (Train Base Half Split-Level)
Technic, Axle 2L with Pin without Friction Ridges
Technic, Axle 2L with Pin without Friction Ridges
×3
Technic, Axle and Pin Connector Perpendicular
Technic, Axle and Pin Connector Perpendicular
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
×13
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×4
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
Plate, Modified 2 x 4 with 2 Studs (Double Jumper)
Plate, Modified 2 x 4 with 2 Studs (Double Jumper)
Technic, Axle 2L with Reverser Handle Axle Connector
Technic, Axle 2L with Reverser Handle Axle Connector
×2
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
Wedge 3 x 2 Right
Wedge 3 x 2 Right
×2
Technic, Gear 12 Tooth Bevel
Technic, Gear 12 Tooth Bevel
×2
Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole
Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole
×4
Technic, Liftarm Thin 1 x 3 - Axle Holes
Technic, Liftarm Thin 1 x 3 - Axle Holes
×2
Tile 1 x 6
Tile 1 x 6
×2
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
Tile 1 x 6
×24
Tile 1 x 6
Tile 1 x 6
×2
Minifigure, Weapon Hilt Smooth Extended
Minifigure, Weapon Hilt Smooth Extended
×2
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends
Cylinder Half 1 x 2 x 1
Cylinder Half 1 x 2 x 1
×3
Minifigure, Utensil Sherbet / Sundae Dish / Cocktail Glass
Minifigure, Utensil Sherbet / Sundae Dish / Cocktail Glass
Tile 2 x 6
Tile 2 x 6
Arch 1 x 3 Inverted
Arch 1 x 3 Inverted
Arch 1 x 3 Inverted
Arch 1 x 3 Inverted
×2
Arch 1 x 3 Inverted
Arch 1 x 3 Inverted
×2
Arch 1 x 3 Inverted
Arch 1 x 3 Inverted
×5
Slope, Curved 1 x 1
Slope, Curved 1 x 1
×3
Slope, Inverted 45 2 x 2 without Bottom Tube or Bottom Pin
Slope, Inverted 45 2 x 2 without Bottom Tube or Bottom Pin
Slope, Curved 3 x 1 x 2/3
Slope, Curved 3 x 1 x 2/3
×4
Slope, Curved 3 x 1 x 2/3
Slope, Curved 3 x 1 x 2/3
Bar 4L Double (Ladder)
Bar 4L Double (Ladder)
Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate
Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate
Technic, Brick 1 x 1 with Axle Hole
Technic, Brick 1 x 1 with Axle Hole
Technic, Brick 1 x 1 with Axle Hole
Technic, Brick 1 x 1 with Axle Hole
×18
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
Bracket 1 x 1 - 1 x 2 Inverted
×10
Plate, Modified 2 x 3 with 1 x 1 Cutout
Plate, Modified 2 x 3 with 1 x 1 Cutout
×2
Brick, Round Corner 5 x 5 x 3 1/3 Dome Top
Brick, Round Corner 5 x 5 x 3 1/3 Dome Top
Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
×3
Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
Minifigure, Weapon Gun, Pistol Revolver - Large Barrel and Hollow Handle
Minifigure, Weapon Gun, Pistol Revolver - Large Barrel and Hollow Handle
×4
Plate 3 x 3 Corner
Plate 3 x 3 Corner
Plate 3 x 3 Corner
Plate 3 x 3 Corner
×4
Plate 3 x 3 Corner
Plate 3 x 3 Corner
×4
Plate, Round 1 x 4 with 2 Open Studs
Plate, Round 1 x 4 with 2 Open Studs
×2
Plate, Round 1 x 4 with 2 Open Studs
Plate, Round 1 x 4 with 2 Open Studs
×2
Bar 2L with Stop Ring
Bar 2L with Stop Ring
×2
Bar 2L with Stop Ring
Bar 2L with Stop Ring
×6
Plate 1 x 5
Plate 1 x 5
×5
Plate 1 x 5
Plate 1 x 5
×5
Plate 1 x 5
Plate 1 x 5
×2
Plate 1 x 5
Plate 1 x 5
×2
Plate 1 x 5
Plate 1 x 5
×3
Wedge, Plate 6 x 2 Left
Wedge, Plate 6 x 2 Left
×2
Wedge, Plate 6 x 2 Right
Wedge, Plate 6 x 2 Right
×2
Arch 1 x 2 Inverted
Arch 1 x 2 Inverted
Arch 1 x 2 Inverted
Arch 1 x 2 Inverted
×2
Arch 1 x 2 Inverted
Arch 1 x 2 Inverted
×10
Bracket 1 x 1 - 1 x 2
Bracket 1 x 1 - 1 x 2
×8
Bracket 1 x 1 - 1 x 2
Bracket 1 x 1 - 1 x 2
×2
Plate, Round Corner 5 x 5 Macaroni
Plate, Round Corner 5 x 5 Macaroni
×2
Arch 1 x 4 x 3
Arch 1 x 4 x 3
×2
Brick, Modified 1 x 2 x 1 2/3 with Studs on Sides
Brick, Modified 1 x 2 x 1 2/3 with Studs on Sides
Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside
Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside
×4
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×3
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×2
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×2
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×9
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×3
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×5
Slope, Curved 10 x 1
Slope, Curved 10 x 1
Slope, Curved 10 x 1
Slope, Curved 10 x 1
Cone 1 1/6 x 1 1/6 x 2/3 (Fez)
Cone 1 1/6 x 1 1/6 x 2/3 (Fez)
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×6
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×6
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×5
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×4
Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
×2
Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
×3
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
×7
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
×4
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
×4
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
Brick, Modified 1 x 1 x 2/3 with Open Stud
×3
Tile 2 x 4
Tile 2 x 4
Technic, Axle 4L with Stop
Technic, Axle 4L with Stop
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
×15
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
×8
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
×2
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
×5
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 1 with Stud on Side
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
×2
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
×7
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
×5
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×3
Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side
Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side
×9
Brick, Modified Facet 2 x 2
Brick, Modified Facet 2 x 2
×3
Bar 3L (Bar Arrow)
Bar 3L (Bar Arrow)
×3
Technic, Pin 1/2 with Friction Ridges
Technic, Pin 1/2 with Friction Ridges
×2
Technic, Pin 1/2 with Friction Ridges
Technic, Pin 1/2 with Friction Ridges
×9
Brick, Modified 2 x 2 with Channels and Axle Hole
Brick, Modified 2 x 2 with Channels and Axle Hole
Plate 2 x 14
Plate 2 x 14
×6
Plate 2 x 14
Plate 2 x 14
×3
Plate 2 x 14
Plate 2 x 14
×2
Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)
Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)
Plate, Modified 6 x 8 Trap Door Frame Horizontal (Long Pin Holders)
Plate, Modified 6 x 8 Trap Door Frame Horizontal (Long Pin Holders)
Chain 5 Links
Chain 5 Links
×5
Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)
Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×8
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×3
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×2
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×6
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Arch 1 x 6 Raised Arch
Arch 1 x 6 Raised Arch
×2
Arch 1 x 6 Raised Arch
Arch 1 x 6 Raised Arch
×2
Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)
Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)
×2
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
×2
Slope, Curved 4 x 2
Slope, Curved 4 x 2
Arm Skeleton, Bent with Clips (Horizontal Grip)
Arm Skeleton, Bent with Clips (Horizontal Grip)
×2
Technic, Gear 16 Tooth - Axle Hole with Closed Sides
Technic, Gear 16 Tooth - Axle Hole with Closed Sides
×2
Minifigure, Hair Long Wavy with Center Part
Minifigure, Hair Long Wavy with Center Part
Minifigure, Utensil Bucket 1 x 1 x 1 Tapered with Handle Holders
Minifigure, Utensil Bucket 1 x 1 x 1 Tapered with Handle Holders
Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand
Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand
×2
Brick and Axle Separator
Brick and Axle Separator
Torso Plain / (Same Color) Arms / (Same Color) Hands
Torso Plain / (Same Color) Arms / (Same Color) Hands
Tile, Round 1 x 1
Tile, Round 1 x 1
×3
Tile, Round 1 x 1
Tile, Round 1 x 1
×2
Tile, Round 1 x 1
Tile, Round 1 x 1
×5
Tile, Round 1 x 1
Tile, Round 1 x 1
×10
Tile, Round 1 x 1
Tile, Round 1 x 1
×5
Tile, Round 1 x 1 with Dark Bluish Gray Outlined Number 5 on Silver Background Coin Pattern
Tile, Round 1 x 1 with Dark Bluish Gray Outlined Number 5 on Silver Background Coin Pattern
×4
Tile, Round 1 x 1 with Gold and Dark Brown Crown Coin Pattern
Tile, Round 1 x 1 with Gold and Dark Brown Crown Coin Pattern
×4
Tile, Round 1 x 1 with Eye, Black Slit Pupil and White Crescent Glint Pattern
Tile, Round 1 x 1 with Eye, Black Slit Pupil and White Crescent Glint Pattern
×3
Tile, Round 1 x 1 with Dark Brown Aztec Gold Coin with Minifigure Skeleton Head Pattern
Tile, Round 1 x 1 with Dark Brown Aztec Gold Coin with Minifigure Skeleton Head Pattern
×7
Brick, Modified 1 x 2 with Masonry Profile
Brick, Modified 1 x 2 with Masonry Profile
×4
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted
×3
Minifigure, Utensil Ingot 1 x 2
Minifigure, Utensil Ingot 1 x 2
×17
Minifigure, Utensil Ingot 1 x 2
Minifigure, Utensil Ingot 1 x 2
×2
Minifigure, Utensil Ingot 1 x 2
Minifigure, Utensil Ingot 1 x 2
×6
Minifigure, Utensil Ingot 1 x 2
Minifigure, Utensil Ingot 1 x 2
×4
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×3
Bracket 1 x 2 - 1 x 2
Bracket 1 x 2 - 1 x 2
×2

Common questions about The Goonies

How much is LEGO The Goonies (21363-1) worth?

The Goonies sells for an average of $275.00 used and $269.78 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 21363-1?

This set includes 13 minifigures: Skeleton - Standard Skull, Bent Arms Horizontal Grip, Single Leg ($1.48), Michael Walsh (Mikey) ($8.04), Lotney Fratelli (Sloth) ($19.05), Mama Fratelli ($16.77), plus 9 more. The minifigures have a combined BrickLink value of $142.27. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Goonies?

The minifigures make up about 52% of the set value ($142.27 out of $275.00). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Goonies (21363-1) retired?

The Goonies was released in 2025. It should still be widely available at retail from LEGO and authorized retailers.

How do I check if my The Goonies set is complete?

Use the parts list on this page to check every piece and all 13 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Twilight setsTwilight minifiguresMost valuable Twilight figsFree scanner