brick'em
Burlington Northern Santa Fe (BNSF) GP-38 Locomotive

Burlington Northern Santa Fe (BNSF) GP-38 Locomotive

10133-1·Trains·2004·3 minifigs·100 parts

Used Avg
$376.04
New Avg
$392.16
Add to your inventoryScan the minifigs

About Burlington Northern Santa Fe (BNSF) GP-38 Locomotive

Burlington Northern Santa Fe (BNSF) GP-38 Locomotive (10133-1) is a LEGO Trains set released in 2004, currently averaging $376.04 used on BrickLink. It comes with 3 minifigures worth a combined $15.11. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 100 pieces.

Part-out value

The minifigures make up only 4% of this set's value ($15.11 out of $376.04). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Seller notes

  • This is a vintage set (2004). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Burlington Northern Santa Fe (BNSF) GP-38 Locomotive (3)

Conductor Charlie
Conductor Charlie
trn075$6.95
Engineer Max with Dark Gray Hands
Engineer Max with Dark Gray Hands
trn076$4.80
Engineer Max with Dark Bluish Gray Hands
Engineer Max with Dark Bluish Gray Hands
trn131$3.37

Parts (100)

Sticker Sheet for Set 10133 - (53049/4263304)
Sticker Sheet for Set 10133 - (53049/4263304)
Window 1 x 2 x 2 Plane
Window 1 x 2 x 2 Plane
×6
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×20
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4 with Light Switch, 2 White Gauges and Train Throttle Pattern
Tile 1 x 4 with Light Switch, 2 White Gauges and Train Throttle Pattern
Brick, Modified 2 x 4 x 2 with Studs on Sides
Brick, Modified 2 x 4 x 2 with Studs on Sides
Bracket 1 x 2 - 1 x 4
Bracket 1 x 2 - 1 x 4
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×12
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
×2
Technic, Disk 3 x 3
Technic, Disk 3 x 3
×3
Train Motor 9V Decorative Side with Closed Hub Points
Train Motor 9V Decorative Side with Closed Hub Points
×2
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×11
Train Wheel RC, Holder with Black Train Wheel Pair on Chrome Silver Metal Axle with Slots (2878 / 2879c01)
Train Wheel RC, Holder with Black Train Wheel Pair on Chrome Silver Metal Axle with Slots (2878 / 2879c01)
×4
Train Coupling
Train Coupling
×2
Brick 2 x 4
Brick 2 x 4
×4
Brick 2 x 4
Brick 2 x 4
Brick 1 x 2
Brick 1 x 2
×10
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
×12
Brick 1 x 6
Brick 1 x 6
×5
Brick 1 x 6
Brick 1 x 6
×6
Brick 1 x 4
Brick 1 x 4
×2
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
×4
Slope, Curved 2 x 2 Double with 2 Hollow Studs
Slope, Curved 2 x 2 Double with 2 Hollow Studs
×2
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 4
Plate 2 x 4
×3
Plate 2 x 4
Plate 2 x 4
×5
Plate 2 x 3
Plate 2 x 3
×5
Plate 2 x 3
Plate 2 x 3
×4
Plate 2 x 2
Plate 2 x 2
×3
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×12
Plate 1 x 2
Plate 1 x 2
×7
Plate 1 x 2
Plate 1 x 2
×10
Plate 1 x 2
Plate 1 x 2
×11
Plate 1 x 2
Plate 1 x 2
×4
Plate 4 x 6
Plate 4 x 6
Plate 4 x 6
Plate 4 x 6
×3
Slope 45 2 x 4
Slope 45 2 x 4
×2
Slope 45 2 x 4
Slope 45 2 x 4
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Arm Mechanical, Battle Droid
Arm Mechanical, Battle Droid
×15
Slope 45 2 x 3
Slope 45 2 x 3
×2
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×2
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×3
Tile 2 x 2
Tile 2 x 2
Tile 1 x 2
Tile 1 x 2
×6
Tile 1 x 2
Tile 1 x 2
×4
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
×4
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
×8
Technic, Axle  2L Notched
Technic, Axle 2L Notched
×3
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
×2
Plate 1 x 8
Plate 1 x 8
×2
Brick 1 x 3
Brick 1 x 3
×3
Plate 1 x 3
Plate 1 x 3
×2
Plate 1 x 3
Plate 1 x 3
×2
Minifigure, Head (Plain)
Minifigure, Head (Plain)
×4
Plate 1 x 6
Plate 1 x 6
×5
Plate 1 x 6
Plate 1 x 6
×6
Plate 1 x 6
Plate 1 x 6
×6
Plate 1 x 6
Plate 1 x 6
×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Plate 1 x 4
Plate 1 x 4
×8
Plate 1 x 4
Plate 1 x 4
×12
Plate 1 x 4
Plate 1 x 4
×6
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×7
Plate 2 x 6
Plate 2 x 6
×2
Plate 2 x 6
Plate 2 x 6
Door 1 x 3 x 1 Right
Door 1 x 3 x 1 Right
×3
Door 1 x 3 x 1 Left
Door 1 x 3 x 1 Left
×2
Plate 2 x 10
Plate 2 x 10
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×3
Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle
Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle
×2
Train Bogie Plate (Tile, Modified 6 x 4 with 5mm Pin)
Train Bogie Plate (Tile, Modified 6 x 4 with 5mm Pin)
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×8
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
Train Base 6 x 28 with 3 Round Holes Each End and 1 x 2 Cutouts
Train Base 6 x 28 with 3 Round Holes Each End and 1 x 2 Cutouts
Plate 1 x 10
Plate 1 x 10
×2
Plate 1 x 10
Plate 1 x 10
×4
Wedge 4 x 4 x 2/3 Triple Curved
Wedge 4 x 4 x 2/3 Triple Curved
Wedge 4 x 4 x 2/3 Triple Curved
Wedge 4 x 4 x 2/3 Triple Curved
Train Buffer Beam with Rectangular Buffers and Plow
Train Buffer Beam with Rectangular Buffers and Plow
×2
Glass for Window 1 x 2 x 2 Plane
Glass for Window 1 x 2 x 2 Plane
×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×4
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×12
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
Wedge 3 x 2  Right
Wedge 3 x 2 Right
×2
Wedge 3 x 2  Left
Wedge 3 x 2 Left
×2
Plate, Modified 1 x 6 with Train Wagon End / Fence
Plate, Modified 1 x 6 with Train Wagon End / Fence
×2
Tile 1 x 6
Tile 1 x 6
×2
Minifigure, Utensil Car Air Horn
Minifigure, Utensil Car Air Horn
×2
Magnet Cylindrical
Magnet Cylindrical
×2
Hose, Rigid 3mm D. 19L / 15.2cm
Hose, Rigid 3mm D. 19L / 15.2cm
×2

Common questions about Burlington Northern Santa Fe (BNSF) GP-38 Locomotive

How much is LEGO Burlington Northern Santa Fe (BNSF) GP-38 Locomotive (10133-1) worth?

Burlington Northern Santa Fe (BNSF) GP-38 Locomotive sells for an average of $376.04 used and $392.16 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 10133-1?

This set includes 3 minifigures: Conductor Charlie ($6.95), Engineer Max with Dark Gray Hands ($4.80), Engineer Max with Dark Bluish Gray Hands ($3.37). The minifigures have a combined BrickLink value of $15.11. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Burlington Northern Santa Fe (BNSF) GP-38 Locomotive?

The minifigures make up about 4% of the set value ($15.11 out of $376.04). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Burlington Northern Santa Fe (BNSF) GP-38 Locomotive (10133-1) retired?

Yes, Burlington Northern Santa Fe (BNSF) GP-38 Locomotive was released in 2004 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Burlington Northern Santa Fe (BNSF) GP-38 Locomotive set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Trains setsTrains minifiguresMost valuable Trains figsFree scanner