brick'em
Airshow Jet Transporter

Airshow Jet Transporter

60289-1·Town / City·2021·2 minifigs·125 parts

Used Avg
$20.74
New Avg
$41.47
Add to your inventoryScan the minifigs

About Airshow Jet Transporter

Airshow Jet Transporter (60289-1) is a LEGO Town / City set released in 2021, currently averaging $20.74 used on BrickLink. It comes with 2 minifigures worth a combined $4.13. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 125 pieces.

Part-out value

The minifigures make up only 20% of this set's value ($4.13 out of $20.74). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Seller notes

  • Sealed copies sell for $41.47 vs $20.74 used — a 100% premium. If you have this set new in sealed box (NISB), price it accordingly.

Minifigures in Airshow Jet Transporter (2)

Ground Crew - Female, Blue Jacket over Dark Red V-Neck Sweater, Dark Tan Legs, Dark Blue Cap with Dark Orange Ponytail
Ground Crew - Female, Blue Jacket over Dark Red V-Neck Sweater, Dark Tan Legs, Dark Blue Cap with Dark Orange Ponytail
cty1265$1.68
Airshow Jet Pilot - Bright Light Orange Jacket, Dark Blue Legs, White Helmet, Oxygen Mask
Airshow Jet Pilot - Bright Light Orange Jacket, Dark Blue Legs, White Helmet, Oxygen Mask
cty1266$2.45

Parts (125)

Minifigure, Headgear Cap - Short Curved Bill with Seams and Hole on Top
Minifigure, Headgear Cap - Short Curved Bill with Seams and Hole on Top
Slope, Curved 4 x 1 Inverted
Slope, Curved 4 x 1 Inverted
×4
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
×2
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
Windscreen 8 x 4 x 2 Curved with Bar Handle
Windscreen 8 x 4 x 2 Curved with Bar Handle
Panel 1 x 2 x 1 with Rounded Corners and 2 Sides
Panel 1 x 2 x 1 with Rounded Corners and 2 Sides
×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×3
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×2
Plate, Modified 2 x 2 Thin with Plane Single Wheel Holder
Plate, Modified 2 x 2 Thin with Plane Single Wheel Holder
×3
Tile 1 x 4
Tile 1 x 4
Tile 1 x 4
Tile 1 x 4
×2
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
×6
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×4
Tile 2 x 3
Tile 2 x 3
Vehicle, Mudguard 4 x 3 x 1 with Arch Curved
Vehicle, Mudguard 4 x 3 x 1 with Arch Curved
×2
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
×3
Plate, Modified 1 x 4 with Wheels Holder
Plate, Modified 1 x 4 with Wheels Holder
×4
Brick 2 x 4
Brick 2 x 4
×3
Brick 2 x 3
Brick 2 x 3
×2
Tire 14mm D. x 9mm Smooth Small Wide Slick
Tire 14mm D. x 9mm Smooth Small Wide Slick
×8
Brick 1 x 2
Brick 1 x 2
Brick 2 x 8
Brick 2 x 8
Brick 1 x 4
Brick 1 x 4
×2
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
Container, Crate 3 x 4 x 1 2/3 with Handholds
Container, Crate 3 x 4 x 1 2/3 with Handholds
Plate 2 x 4
Plate 2 x 4
×3
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 1 x 2
Plate 1 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×7
Plate 1 x 2
Plate 1 x 2
×2
Plate 4 x 6
Plate 4 x 6
×2
Plate 2 x 8
Plate 2 x 8
Plate 4 x 8
Plate 4 x 8
Hinge Brick 1 x 2 Locking with 1 Finger Vertical End
Hinge Brick 1 x 2 Locking with 1 Finger Vertical End
×2
Slope 45 2 x 2 with Dark Blue Sonar Screen Pattern
Slope 45 2 x 2 with Dark Blue Sonar Screen Pattern
Panel 1 x 4 x 1
Panel 1 x 4 x 1
×2
Brick, Modified 2 x 4 with Pin on Top and Side Cutouts
Brick, Modified 2 x 4 with Pin on Top and Side Cutouts
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
Tile 1 x 2
Tile 1 x 2
×2
Tile 1 x 2
Tile 1 x 2
×2
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
×2
Plate 1 x 8
Plate 1 x 8
×2
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
×3
Fence 1 x 4 x 1 Lattice
Fence 1 x 4 x 1 Lattice
×2
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
Plate 1 x 6
×2
Slope 65 2 x 2 x 2 with Bottom Tube
Slope 65 2 x 2 x 2 with Bottom Tube
Plate 1 x 4
Plate 1 x 4
×6
Technic, Plate 2 x 8 with 7 Holes
Technic, Plate 2 x 8 with 7 Holes
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×2
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Minifigure, Utensil Cup
Minifigure, Utensil Cup
Minifigure Breathing Apparatus, Aviator Oxygen Mask
Minifigure Breathing Apparatus, Aviator Oxygen Mask
Minifigure, Utensil Tool Spanner Wrench / Screwdriver
Minifigure, Utensil Tool Spanner Wrench / Screwdriver
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×4
Tile 1 x 8
Tile 1 x 8
×2
Wedge 6 x 2 Right
Wedge 6 x 2 Right
Wedge 6 x 2 Left
Wedge 6 x 2 Left
Windscreen 2 x 6 x 2
Windscreen 2 x 6 x 2
Slope, Curved 6 x 1 with 2 Studs
Slope, Curved 6 x 1 with 2 Studs
×2
Plate 2 x 16
Plate 2 x 16
Wedge 6 x 4 Triple Inverted Curved
Wedge 6 x 4 Triple Inverted Curved
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Hinge Plate 1 x 2 Locking with 2 Fingers on End
×2
Plate, Modified 1 x 2 with Open O Clip on Top
Plate, Modified 1 x 2 with Open O Clip on Top
×2
Minifigure, Utensil Tool Mallet / Hammer
Minifigure, Utensil Tool Mallet / Hammer
Antenna Small Base with Black Lever (4592 / 4593)
Antenna Small Base with Black Lever (4592 / 4593)
×2
Wedge, Plate 3 x 4 with Stud Notches
Wedge, Plate 3 x 4 with Stud Notches
Wedge 4 x 4 Triple with Stud Notches
Wedge 4 x 4 Triple with Stud Notches
×2
Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round
Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round
×2
Wedge 4 x 6 x 2/3 Triple Curved
Wedge 4 x 6 x 2/3 Triple Curved
Bar with Light Cover (Bulb) / Bionicle Barraki Eye
Bar with Light Cover (Bulb) / Bionicle Barraki Eye
×9
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
×4
Sticker Sheet for Set 60289 - (73771/6329105)
Sticker Sheet for Set 60289 - (73771/6329105)
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs
Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs
×2
Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs
Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs
×2
Brick 1 x 12
Brick 1 x 12
×4
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
Slope, Curved 1 x 4 x 1 1/3
Slope, Curved 1 x 4 x 1 1/3
Panel 1 x 1 x 1 Corner
Panel 1 x 1 x 1 Corner
×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×2
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
×5
Vehicle, Base 6 x 10 x 1 with 2 x 4 Recessed Center and 2 Holes
Vehicle, Base 6 x 10 x 1 with 2 x 4 Recessed Center and 2 Holes
Wheel Small with Stub Axles with Molded Black Hard Rubber Tire Pattern
Wheel Small with Stub Axles with Molded Black Hard Rubber Tire Pattern
×3
Plate, Modified 1 x 6 with Train Wagon End / Fence
Plate, Modified 1 x 6 with Train Wagon End / Fence
Tile 1 x 6
Tile 1 x 6
×4
Tile 1 x 6
Tile 1 x 6
×3
Brick, Modified 2 x 2 x 2/3 Ribbed with Axle Hole
Brick, Modified 2 x 2 x 2/3 Ribbed with Axle Hole
×3
Slope, Inverted 45 4 x 4 Double with 2 Holes
Slope, Inverted 45 4 x 4 Double with 2 Holes
×3
Wheel  8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back
Wheel 8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back
×8
Slope, Curved 10 x 1
Slope, Curved 10 x 1
×2
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×2
Tile 2 x 4
Tile 2 x 4
×4
Tile 2 x 4
Tile 2 x 4
×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side
Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side
Bar   5L with Handle (Friction Ram)
Bar 5L with Handle (Friction Ram)
×2
Brick, Modified Facet 2 x 2
Brick, Modified Facet 2 x 2
×2
Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread
Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread
×4
Tile, Modified 3 x 4 with 4 Studs in Center
Tile, Modified 3 x 4 with 4 Studs in Center
Wedge, Plate 10 x 10 Cut Corner with no Studs in Center
Wedge, Plate 10 x 10 Cut Corner with no Studs in Center
×2
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×4
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
×2
Bracket 1 x 2 - 2 x 4
Bracket 1 x 2 - 2 x 4
×2
Tile, Round 1 x 1
Tile, Round 1 x 1
×5
Tile, Round 1 x 1
Tile, Round 1 x 1
×4
Tile, Round 1 x 1
Tile, Round 1 x 1
×2
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×2
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×2
Bracket 1 x 2 - 1 x 2
Bracket 1 x 2 - 1 x 2
×2
Flag 5 x 6 Hexagonal
Flag 5 x 6 Hexagonal
×2

Common questions about Airshow Jet Transporter

How much is LEGO Airshow Jet Transporter (60289-1) worth?

Airshow Jet Transporter sells for an average of $20.74 used and $41.47 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60289-1?

This set includes 2 minifigures: Ground Crew - Female, Blue Jacket over Dark Red V-Neck Sweater, Dark Tan Legs, Dark Blue Cap with Dark Orange Ponytail ($1.68), Airshow Jet Pilot - Bright Light Orange Jacket, Dark Blue Legs, White Helmet, Oxygen Mask ($2.45). The minifigures have a combined BrickLink value of $4.13. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Airshow Jet Transporter?

The minifigures make up about 20% of the set value ($4.13 out of $20.74). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Airshow Jet Transporter (60289-1) retired?

Yes, Airshow Jet Transporter was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Airshow Jet Transporter set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Town / City setsTown / City minifiguresMost valuable Town / City figsFree scanner