brick'em
Jet

Jet

1775-1·Town / City·1994·3 minifigs·83 parts

Used Avg
$60.26
New Avg
$60.26
Showing used price
Add to your inventoryScan the minifigs

About Jet

Jet (1775-1) is a LEGO Town / City set released in 1994, currently averaging $60.26 used on BrickLink. It comes with 3 minifigures worth a combined $6.77. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 83 pieces.

Part-out value

The minifigures make up only 11% of this set's value ($6.77 out of $60.26). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Seller notes

  • This is a vintage set (1994). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Jet (3)

Airport - Pilot, Black Legs, Black Hat
Airport - Pilot, Black Legs, Black Hat
air002$2.57
Airport - Blue, Blue Legs, Black Male Hair
Airport - Blue, Blue Legs, Black Male Hair
air009$2.63
Leather Jacket with Zippers - Black Legs, Black Male Hair
Leather Jacket with Zippers - Black Legs, Black Male Hair
trn090$1.57

Parts (83)

Sticker Sheet for Set 1775 - (169705)
Sticker Sheet for Set 1775 - (169705)
Minifigure, Utensil Goblet
Minifigure, Utensil Goblet
Wedge 3 1/2 x 4 without Stud Notches
Wedge 3 1/2 x 4 without Stud Notches
Plate, Modified 2 x 2 Thin with Plane Single Wheel Holder and Trans-Clear Wheel with Black Tire 14mm D. x 4mm Smooth Small Single (2415 / 3464c01)
Plate, Modified 2 x 2 Thin with Plane Single Wheel Holder and Trans-Clear Wheel with Black Tire 14mm D. x 4mm Smooth Small Single (2415 / 3464c01)
Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge
Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge
Hinge Plate 1 x 2 with 3 Fingers on Side
Hinge Plate 1 x 2 with 3 Fingers on Side
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
Antenna Whip 8H
Antenna Whip 8H
Brick 2 x 3
Brick 2 x 3
Brick 2 x 2
Brick 2 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
×2
Brick 1 x 4
Brick 1 x 4
×2
Brick 1 x 4
Brick 1 x 4
×2
Plate 2 x 4
Plate 2 x 4
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 1
Plate 1 x 1
×2
Plate 1 x 1
Plate 1 x 1
×4
Plate 1 x 1
Plate 1 x 1
×2
Plate 4 x 10
Plate 4 x 10
Plate 4 x 6
Plate 4 x 6
Plate 6 x 8
Plate 6 x 8
Slope 45 2 x 3
Slope 45 2 x 3
×2
Slope 45 2 x 2 with Flight Control Pattern
Slope 45 2 x 2 with Flight Control Pattern
Slope 45 2 x 2 with Black and Green Radar Screen, Digital '38', Buttons, and Dial Pattern
Slope 45 2 x 2 with Black and Green Radar Screen, Digital '38', Buttons, and Dial Pattern
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2 with Red and Yellow Controls and Two White Stripes on Left Pattern
Tile 1 x 2 with Red and Yellow Controls and Two White Stripes on Left Pattern
Tile 1 x 2 with Computer Keyboard Simple Pattern
Tile 1 x 2 with Computer Keyboard Simple Pattern
Tile 1 x 1
Tile 1 x 1
×2
Slope 33 3 x 2
Slope 33 3 x 2
×2
Plate 1 x 8
Plate 1 x 8
Wedge, Plate 4 x 8 Tail
Wedge, Plate 4 x 8 Tail
Wedge, Plate 7 x 12 Wing Right
Wedge, Plate 7 x 12 Wing Right
Wedge, Plate 7 x 12 Wing Left
Wedge, Plate 7 x 12 Wing Left
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×2
Plate 1 x 6
Plate 1 x 6
×2
Turntable 2 x 2 Plate with Light Gray Top (3680 / 3679)
Turntable 2 x 2 Plate with Light Gray Top (3680 / 3679)
×3
Slope 75 2 x 2 x 3 - Hollow Studs
Slope 75 2 x 2 x 3 - Hollow Studs
×2
Plate 1 x 4
Plate 1 x 4
×6
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 10
Plate 2 x 10
Hinge Brick 1 x 2 Top Plate
Hinge Brick 1 x 2 Top Plate
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×4
Plate, Round 1 x 1
Plate, Round 1 x 1
×4
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
×3
Tile 1 x 8
Tile 1 x 8
Hinge Plate 1 x 2 with 2 Fingers on End - Hollow Studs
Hinge Plate 1 x 2 with 2 Fingers on End - Hollow Studs
Minifigure, Utensil Briefcase / Suitcase
Minifigure, Utensil Briefcase / Suitcase
Minifigure, Utensil Briefcase / Suitcase
Minifigure, Utensil Briefcase / Suitcase
Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts
Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts
×2
Plate 1 x 10
Plate 1 x 10
×2
Plate 1 x 10
Plate 1 x 10
Antenna Small Base with Light Gray Lever (4592 / 4593)
Antenna Small Base with Light Gray Lever (4592 / 4593)
Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139)
Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139)
×4
Hinge Tile 1 x 4
Hinge Tile 1 x 4
×3
Slope, Inverted 45 4 x 4 Double
Slope, Inverted 45 4 x 4 Double
×3
Wedge 4 x 4 Triple Inverted with Connections between 2 Studs
Wedge 4 x 4 Triple Inverted with Connections between 2 Studs
×2
Wedge 6 x 4 Triple Inverted with Connections between 2 Studs
Wedge 6 x 4 Triple Inverted with Connections between 2 Studs
Wedge 6 x 4 Triple Inverted with Connections between 2 Studs
Wedge 6 x 4 Triple Inverted with Connections between 2 Studs
Slope 45 4 x 4 Double with Hinge
Slope 45 4 x 4 Double with Hinge
×3
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Glass for Window 1 x 2 x 2 Plane
Glass for Window 1 x 2 x 2 Plane
×8
Window 1 x 4 x 2 Plane, Single Top Hole and Double Bottom Holes for Glass
Window 1 x 4 x 2 Plane, Single Top Hole and Double Bottom Holes for Glass
×4
Panel 1 x 2 x 2 - Solid Studs
Panel 1 x 2 x 2 - Solid Studs
×2
Panel 1 x 2 x 1
Panel 1 x 2 x 1
×2
Panel 1 x 2 x 1
Panel 1 x 2 x 1
Tail Wedge
Tail Wedge
Engine, Smooth Large, 1 x 2 Thin Top Plate
Engine, Smooth Large, 1 x 2 Thin Top Plate
×2
Engine, Smooth Large, Center with Fan/Gear and Axle End
Engine, Smooth Large, Center with Fan/Gear and Axle End
×2
Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins
Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins
×2
Windscreen 3 x 4 x 4 Inverted
Windscreen 3 x 4 x 4 Inverted
×3
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Wedge 4 x 4 Triple without Stud Notches
Wedge 4 x 4 Triple without Stud Notches
Windscreen 6 x 4 x 1 1/3 with Bottom Tabs and Hollow Studs
Windscreen 6 x 4 x 1 1/3 with Bottom Tabs and Hollow Studs
Wedge 6 x 4 Cutout without Stud Notches
Wedge 6 x 4 Cutout without Stud Notches

Common questions about Jet

How much is LEGO Jet (1775-1) worth?

Jet sells for an average of $60.26 used on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 1775-1?

This set includes 3 minifigures: Airport - Pilot, Black Legs, Black Hat ($2.57), Airport - Blue, Blue Legs, Black Male Hair ($2.63), Leather Jacket with Zippers - Black Legs, Black Male Hair ($1.57). The minifigures have a combined BrickLink value of $6.77. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Jet?

The minifigures make up about 11% of the set value ($6.77 out of $60.26). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Jet (1775-1) retired?

Yes, Jet was released in 1994 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Jet set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Town / City setsTown / City minifiguresMost valuable Town / City figsFree scanner