How much is LEGO Bowser's Castle (72039-1) worth?

Bowser's Castle sells for an average of $79.99 used on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 72039-1?

This set includes 4 minifigures: Lava Bubble - Scanner Code with Blue Lines ($1.33), Yoshi - White Tile, Round 1 x 2 Half on Front ($5.80), Bowser - Pointed Claws ($16.09), Thwomp - Small with Chains ($4.75). The minifigures have a combined BrickLink value of $27.97. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Bowser's Castle?

The minifigures make up about 35% of the set value ($27.97 out of $79.99). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Bowser's Castle (72039-1) retired?

Bowser's Castle was released in 2025. It should still be widely available at retail from LEGO and authorized retailers.

How do I check if my Bowser's Castle set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Bowser's Castle

Name: Bowser's Castle
Brand: LEGO
SKU: 72039-1
Price: 79.99 USD
Availability: InStock

72039-1·Super Mario·2025·4 minifigs·270 parts

Used Avg

$79.99

New Avg

$79.99

Showing used price

Add to your inventory Scan the minifigs

About Bowser's Castle

Bowser's Castle (72039-1) is a LEGO Super Mario set released in 2025, currently averaging $79.99 used on BrickLink. It comes with 4 minifigures worth a combined $27.97. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 270 pieces.

Parts (270)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×4

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×2

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×8

Tile 2 x 2 Corner

Tile, Round 2 x 2 with Bottom Stud Holder

×4

Tile, Round 2 x 2 with Bottom Stud Holder

×3

Slope, Curved 2 x 2 x 2/3

×3

Slope, Curved 2 x 2 x 2/3

×3

Slope, Curved 2 x 2 x 2/3

×2

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×2

Technic, Axle 5L with Stop

Slope 45 2 x 1 Triple with Bottom Stud Holder

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×4

Tile, Round 1 x 2 Half

Tile 4 x 4

Technic, Liftarm Thick 1 x 1 (Spacer)

×6

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Round 2 x 2 with Open Stud

×7

Tile, Round 2 x 2 with Open Stud

×6

Plate, Modified 1 x 2 with Pin Hole on Bottom

×2

Dragon Tail / Horn Section Stepped

×2

Tile, Modified 2 x 3 Pentagonal

×6

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×37

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×14

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

×2

Technic, Axle and Pin Connector Hub with 1L Axle

Arch 1 x 5 x 4 - Continuous Bow

×4

Brick 2 x 2 Corner

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

Wedge, Plate 3 x 6 Cut Corners

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×2

Technic, Axle 3L with Stop

Plate 2 x 12

Brick 1 x 2 x 5

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

×4

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×9

Plate, Round 1 x 1 with Bar Handle

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×3

Wedge, Plate 2 x 2 Cut Corner

×2

Technic, Axle 1L with Tow Ball

Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube

Technic, Pin with Short Friction Ridges

×10

Slope 45 2 x 1 with Cutout without Stud

×4

Wedge 2 x 1 x 2/3 Right

×6

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

×6

Wedge 2 x 1 x 2/3 Left

Brick 2 x 4

×2

Brick 2 x 3

×17

Brick 2 x 2

×11

Minifigure, Utensil Handlebars

Brick 1 x 2

×2

Brick 1 x 2

×6

Brick 1 x 1

×2

Brick 1 x 1

×2

Brick 1 x 1

×2

Brick 1 x 8

Brick 1 x 6

×3

Brick 1 x 4

×4

Chain 21 Links (16-17L)

×2

Brick, Modified 1 x 2 with Log Profile

×5

Plate 2 x 4

×3

Plate 2 x 4

×8

Plate 2 x 4

Plate 2 x 3

×8

Plate 2 x 2

×4

Plate 2 x 2

×4

Plate 2 x 2

×7

Plate 1 x 2

×5

Plate 1 x 2

×4

Plate 1 x 2

×4

Plate 1 x 2

×2

Plate 1 x 2

×8

Plate 1 x 1

×3

Plate 1 x 1

×4

Plate 1 x 1

×7

Plate 1 x 1

×5

Plate 1 x 1

×3

Plate 4 x 10

Plate 4 x 4

×2

Plate 4 x 4

Plate 4 x 6

×2

Plate 4 x 6

×2

Plate 2 x 8

×8

Plate 2 x 8

Slope 45 2 x 4

Slope 45 2 x 2

×2

Slope 45 2 x 1

Brick, Modified 1 x 4 with Studs on Side

×6

Vehicle, Steering Wheel Small, 2 Studs Diameter

×4

Tile 2 x 2

×2

Tile 2 x 2

Tile 2 x 2 with Super Mario Scanner Code ATV and 'START' Pattern (Sticker) - Set 72036 / 72039 / 72044

Tile 2 x 2 with Super Mario Scanner Code Mach 8 Kart Pattern (Sticker) - Set 72039

Tile 1 x 2

×5

Tile 1 x 2

×2

Tile 1 x 2

Tile 1 x 1

×8

Tile 1 x 1

×2

Tile 1 x 1

×3

Technic, Brick 1 x 2 with Holes

Technic, Plate 2 x 6 with 5 Holes

×2

Technic, Axle and Pin Connector Angled #1

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×2

Technic, Axle Connector with Axle Hole

×2

Technic, Axle 2L Notched

×4

Technic, Axle 5L

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×4

Technic, Axle 5.5L with Stop

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm Thick 1 x 5

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×7

Tile, Modified 2 x 2 with Studs on Edge

×6

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate 1 x 8

×3

Plate 1 x 8

×2

Brick, Modified 1 x 2 with Bar Handle on End - Bar Flush with Edge

×4

Plate, Round 1 x 2 with Open Studs

×7

Plate, Round 1 x 2 with Open Studs

×11

Plate 1 x 3

×2

Plate 1 x 3

×8

Plate 1 x 3

×2

Minifigure, Head (Plain)

×12

Plate 1 x 6

×8

Plate 1 x 6

Technic, Pin without Friction Ridges

×10

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 8 with Holes

×2

Technic, Axle 4L

Plate 1 x 4

×9

Plate 1 x 4

×3

Plate 1 x 4

×5

Slope, Curved 1 x 2 with Bottom Stud Holder

Wave Rounded Straight Single with Small Pin End (Candle Flame)

×3

Plate 2 x 6

×2

Plate 2 x 6

×2

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Plate 2 x 10

Brick, Round 2 x 2 with Axle Hole

Bracket 2 x 2 - 2 x 2 with 2 Holes

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×13

Plate, Modified 8 x 8 with Grille and Hole in Center

Tile 1 x 8

Plate, Modified 1 x 4 with 2 Studs with Groove

×10

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Door 1 x 4 x 9 Arched Gate with Bars and Three Studs

×2

Technic Bush 1/2 Smooth

×6

Technic, Pin 1/2 without Friction Ridges

×3

Plate 2 x 16

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×2

Tail Shuttle, Small

Bracket 1 x 2 - 2 x 2

×8

Bracket 1 x 2 - 2 x 2

Plate, Modified 1 x 2 with Open O Clip on Top

×4

Plate, Modified 1 x 2 with Open O Clip on Top

×2

Minifigure, Utensil Tool Mallet / Hammer

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Dish 2 x 2 Inverted (Radar)

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×12

Panel 1 x 2 x 1 with Rounded Corners

Vehicle, Mudguard 3 x 3 x 1 with Arch Round

Wedge, Plate 2 x 4

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×8

Projectile Shell 2 x 2 with Molded White Bottom and Launch Attachment Pattern

×2

Projectile Shell 2 x 2 with Molded White Bottom and Launch Attachment Pattern

Banana, Peeled with Black and White Eyes and Grin Pattern

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×2

Panel 1 x 6 x 5

×4

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×4

Slope 65 2 x 1 x 2

×4

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Wheel 30 x 15 with Pin Hole with Molded Black Hard Plastic Tire Pattern

×4

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Slope, Curved 4 x 1

×2

Slope, Curved 4 x 1

×3

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×7

Technic, Axle 2L with Reverser Handle Axle Connector

Technic, Pin 3L with Friction Ridges

Technic, Axle 3L with Stud

×2

Plate, Modified 6 x 6 with Rounded Corners and 4 Feet

×2

Technic, Axle Connector Hub with 4 Bars and Through Axle Hole

Projectile Launcher Part, Trigger for Bazooka, Mini Blaster / Shooter

×3

Minifigure, Weapon Bazooka, Mini Blaster / Shooter

×2

Wave Rounded 1 x 4 with 2 Studs on Ends (Flame, Rock)

×2

Sticker Sheet for Set 72039 - (10112567/6540132)

Wheel Hard Plastic 37 x 21 with Pin Hole

×4

Slope 15 5 x 8 x 2/3 with 12 Recessed Studs

Bar 2L with Stop Ring

×5

Brick, Round 4 x 4 Dome Top with 2 x 2 Recessed Center

Wedge 3 x 2 Left No Studs

×2

Wedge 3 x 2 Right No Studs

×2

Windscreen 2 x 4 x 1 Curved

Plate, Round 1 x 1 with Open Stud

×23

Plate, Round 1 x 1 with Open Stud

×13

Plate, Round 1 x 1 with Open Stud

×7

Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout

×4

Slope 30 1 x 2 x 2/3

×5

Technic, Axle 4L with Stop

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Brick, Modified Facet 2 x 2

×4

Bar 3L (Bar Arrow)

×3

Window 1 x 2 x 2 Castle

×2

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Slope, Curved 4 x 1 x 2/3 Double

×2

Bracket 1 x 2 - 2 x 4

Brick and Axle Separator

Tile, Round 1 x 1

×5

Technic, Axle 4L with Center Stop

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 2 x 2 Inverted

×8

Minifigure, Utensil Ingot 1 x 2

×3

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2

×2

Bracket 1 x 2 - 1 x 2

×2

Bionicle 1 x 3 Tooth with Axle Hole (Bohrok Eye)

Bowser's Castle

About Bowser's Castle

Part-out value

Minifigures in Bowser's Castle (4)

Parts (270)

Common questions about Bowser's Castle

How much is LEGO Bowser's Castle (72039-1) worth?

What minifigures come in LEGO set 72039-1?

Is it worth parting out LEGO Bowser's Castle?

Is LEGO Bowser's Castle (72039-1) retired?

How do I check if my Bowser's Castle set is complete?

More Super Mario sets

Explore more