brick'em
Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive

Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive

77905-1·Super Heroes·2020·3 minifigs·91 parts

Used Avg
$50.00
New Avg
$89.52
Add to your inventoryScan the minifigs

About Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive

Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive (77905-1) is a LEGO Super Heroes set from 2020 that sells for around $50.00 used on BrickLink. It includes 3 minifigures with a combined resale value of $89.80 — that's 180% of the set's price in figures alone. The most valuable is Red Guardian at $55.08. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

The minifigures in this set are worth $89.80 individually on BrickLink — 180% of the complete set price ($50.00). The figs carry almost all the value here. If you find this set incomplete or are buying to part out, the minifigures are where the money is.

Seller notes

  • Sealed copies sell for $89.52 vs $50.00 used — a 79% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Red Guardian ($55.08) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.

Minifigures in Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive (3)

Taskmaster - No Hood
Taskmaster - No Hood
sh0674$10.87
Black Widow - White Jumpsuit, Dark Orange Mid-Length Hair
Black Widow - White Jumpsuit, Dark Orange Mid-Length Hair
sh0675$23.86
Red Guardian
Red Guardian
sh0676$55.08

Parts (91)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
Tile, Modified 2 x 2 Inverted
Tile, Modified 2 x 2 Inverted
Minifigure, Utensil Paint Roller Brush Handle
Minifigure, Utensil Paint Roller Brush Handle
×2
Wedge 2 x 2 (Slope 45 Corner)
Wedge 2 x 2 (Slope 45 Corner)
×4
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder
×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×2
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 1 x 1 with Open O Clip
×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
×8
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×6
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 3 Cut Corner
×2
Tile, Modified 2 x 2 with Pin
Tile, Modified 2 x 2 with Pin
×3
Plate, Modified 2 x 2 with Pin on Bottom
Plate, Modified 2 x 2 with Pin on Bottom
Antenna Whip 8H
Antenna Whip 8H
Tile 2 x 3
Tile 2 x 3
×2
Minifigure, Weapon Machete
Minifigure, Weapon Machete
×2
Brick, Modified 2 x 2 with Pins and Axle Hole
Brick, Modified 2 x 2 with Pins and Axle Hole
Brick 2 x 3
Brick 2 x 3
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
×2
Container, Crate 3 x 4 x 1 2/3 with Handholds
Container, Crate 3 x 4 x 1 2/3 with Handholds
Plate 2 x 3
Plate 2 x 3
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×4
Plate 4 x 12
Plate 4 x 12
×3
Slope 18 4 x 2
Slope 18 4 x 2
×2
Slope 45 2 x 4
Slope 45 2 x 4
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Slope 45 2 x 2
Slope 45 2 x 2
×2
Panel 1 x 4 x 1
Panel 1 x 4 x 1
Slope 45 2 x 2 Double Convex Corner
Slope 45 2 x 2 Double Convex Corner
×2
Tile 1 x 2
Tile 1 x 2
×6
Tile 1 x 2 with Cell Phone / Smartphone with '81%' and Minifigure on Screen Pattern
Tile 1 x 2 with Cell Phone / Smartphone with '81%' and Minifigure on Screen Pattern
Tile 1 x 1 with Black and Red Digital Keypad Pattern
Tile 1 x 1 with Black and Red Digital Keypad Pattern
×2
Technic, Plate 2 x 6 with 5 Holes
Technic, Plate 2 x 6 with 5 Holes
Technic, Liftarm Thick 1 x 5
Technic, Liftarm Thick 1 x 5
×2
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
Technic, Pin Connector Plate with Hole on Bottom
Technic, Pin Connector Plate with Hole on Bottom
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Slope, Inverted 45 4 x 1 Double
Slope, Inverted 45 4 x 1 Double
×2
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
Slope 33 3 x 2
Slope 33 3 x 2
Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper)
Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper)
Arch 1 x 4
Arch 1 x 4
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×5
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Technic, Plate 2 x 4 with 3 Holes
Technic, Plate 2 x 4 with 3 Holes
×3
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Plate 2 x 10
Plate 2 x 10
Hinge Brick 1 x 2 Top Plate
Hinge Brick 1 x 2 Top Plate
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Plate 6 x 6
Plate 6 x 6
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×4
Plate, Round 1 x 1
Plate, Round 1 x 1
×5
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×2
Tile 1 x 8
Tile 1 x 8
×4
Brick, Modified 1 x 2 with Channel
Brick, Modified 1 x 2 with Channel
Bar  12L with 1 x 2 Plate End Solid Studs and 1 x 1 Round Plate End
Bar 12L with 1 x 2 Plate End Solid Studs and 1 x 1 Round Plate End
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×7
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Left
Wedge 4 x 2 Triple Right
Wedge 4 x 2 Triple Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×3
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
×3
Minifigure, Utensil Briefcase / Suitcase
Minifigure, Utensil Briefcase / Suitcase
Minifigure, Weapon Bow, Longbow with Arrow Drawn
Minifigure, Weapon Bow, Longbow with Arrow Drawn
Technic, Axle  3L
Technic, Axle 3L
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×2
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×5
Bar   1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×7
Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes
Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes
×6
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
×2
Bar 1 x 4 x 2
Bar 1 x 4 x 2
×2
Brick, Modified 2 x 4 with Pins
Brick, Modified 2 x 4 with Pins
Tile 1 x 3
Tile 1 x 3
×4
Tile 1 x 3
Tile 1 x 3
×5
Bar   1L with Angled Hollow Stud
Bar 1L with Angled Hollow Stud
×2
Sticker Sheet for Set 77905 - (72143/6322976)
Sticker Sheet for Set 77905 - (72143/6322976)
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×4
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
×9
Tile, Modified 3 x 4 with 4 Studs in Center
Tile, Modified 3 x 4 with 4 Studs in Center
Minifigure, Shield Circular / Round Rimmed Face with Stud
Minifigure, Shield Circular / Round Rimmed Face with Stud
×2
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Clip with Center Cut on Top
×6
Tire 30.4 x 14 Offset Tread - Band Around Center of Tread
Tire 30.4 x 14 Offset Tread - Band Around Center of Tread
×6
Plate, Modified 1 x 4 with 2 Studs without Groove
Plate, Modified 1 x 4 with 2 Studs without Groove
×4
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 1 with 2/3 Cutout
Bracket 1 x 2 - 2 x 4
Bracket 1 x 2 - 2 x 4
Tile, Round 1 x 1
Tile, Round 1 x 1
×11
Minifigure, Utensil Ingot 1 x 2
Minifigure, Utensil Ingot 1 x 2
×3
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×2

Common questions about Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive

How much is LEGO Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive (77905-1) worth?

Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive sells for an average of $50.00 used and $89.52 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 77905-1?

This set includes 3 minifigures: Taskmaster - No Hood ($10.87), Black Widow - White Jumpsuit, Dark Orange Mid-Length Hair ($23.86), Red Guardian ($55.08). The minifigures have a combined BrickLink value of $89.80. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive?

The minifigures alone are worth $89.80 (180% of the $50.00 set price), so parting out the figs individually on BrickLink can be profitable. Start with Red Guardian at $55.08 — it's the highest-value figure in the set.

Is LEGO Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive (77905-1) retired?

Yes, Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive was released in 2020 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Taskmaster's Ambush - San Diego Comic-Con 2020 Exclusive set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Super Heroes setsSuper Heroes minifiguresMost valuable Super Heroes figsFree scanner