brick'em
Armored Assault Tank (AAT)

Armored Assault Tank (AAT)

8018-1·Star Wars·2009·4 minifigs·118 parts

Used Avg
$76.76
New Avg
$278.09
Add to your inventoryScan the minifigs

About Armored Assault Tank (AAT)

Armored Assault Tank (AAT) (8018-1) is a LEGO Star Wars set released in 2009, currently averaging $76.76 used on BrickLink. It comes with 4 minifigures worth a combined $32.01. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 118 pieces.

Part-out value

The minifigures account for about 42% of the set's value ($32.01 out of $76.76). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Seller notes

  • Sealed copies sell for $278.09 vs $76.76 used — a 262% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • This is a vintage set (2009). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Armored Assault Tank (AAT) (4)

Battle Droid - Tan, Angled Arms
Battle Droid - Tan, Angled Arms
sw0001b×2$1.59
Clone Trooper (Phase 1) - Large Eyes
Clone Trooper (Phase 1) - Large Eyes
sw0201$6.68
Yoda - Clone Wars, Light Bluish Gray Hair
Yoda - Clone Wars, Light Bluish Gray Hair
sw0219$4.57
Super Battle Droid - Pearl Dark Gray, Blaster Arm
Super Battle Droid - Pearl Dark Gray, Blaster Arm
sw0230×3$5.86

Parts (118)

Brick 2 x 2 Corner
Brick 2 x 2 Corner
×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4
Tile 1 x 4
×4
Bracket 1 x 2 - 1 x 4
Bracket 1 x 2 - 1 x 4
×4
Plate, Modified 2 x 2 with Pin Hole
Plate, Modified 2 x 2 with Pin Hole
Brick 2 x 6
Brick 2 x 6
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×10
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×6
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×10
Brick 2 x 4
Brick 2 x 4
×3
Brick 2 x 3
Brick 2 x 3
×5
Brick 2 x 2
Brick 2 x 2
×4
Brick 1 x 1
Brick 1 x 1
×6
Brick 2 x 8
Brick 2 x 8
×2
Brick 1 x 6
Brick 1 x 6
×2
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
×6
Plate 2 x 4
Plate 2 x 4
Plate 2 x 4
Plate 2 x 4
×6
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×24
Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)
Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)
Plate, Modified 6 x 6 x 2/3 Cross with Dome
Plate, Modified 6 x 6 x 2/3 Cross with Dome
Plate 6 x 10
Plate 6 x 10
×2
Plate 4 x 8
Plate 4 x 8
×2
Slope 18 4 x 2
Slope 18 4 x 2
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Arm Mechanical, Battle Droid
Arm Mechanical, Battle Droid
Slope 45 2 x 2
Slope 45 2 x 2
×6
Slope 45 2 x 1
Slope 45 2 x 1
×4
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
×2
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
×6
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
×4
Brick, Round  1 x 1
Brick, Round 1 x 1
×2
Tile 2 x 2
Tile 2 x 2
×4
Tile 1 x 2
Tile 1 x 2
×3
Tile 1 x 2
Tile 1 x 2
×6
Tile 1 x 2 with SW Computer Pattern
Tile 1 x 2 with SW Computer Pattern
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
×6
Technic, Axle Connector with Axle Hole
Technic, Axle Connector with Axle Hole
Technic, Pin 3L with Friction Ridges and Stop Bush
Technic, Pin 3L with Friction Ridges and Stop Bush
×3
Technic, Axle  2L Notched
Technic, Axle 2L Notched
Slope 33 3 x 2
Slope 33 3 x 2
×8
Slope, Curved 3 x 1 x 2 with Hollow Stud
Slope, Curved 3 x 1 x 2 with Hollow Stud
×2
Brick 1 x 3
Brick 1 x 3
×6
Plate 1 x 3
Plate 1 x 3
×6
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×10
Plate 1 x 6
Plate 1 x 6
×5
Slope 65 2 x 2 x 2 with Bottom Tube
Slope 65 2 x 2 x 2 with Bottom Tube
×2
Slope 65 2 x 2 x 2 with Bottom Tube
Slope 65 2 x 2 x 2 with Bottom Tube
×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×6
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×2
Technic, Brick 1 x 8 with Holes
Technic, Brick 1 x 8 with Holes
Technic, Axle  4L
Technic, Axle 4L
Plate 1 x 4
Plate 1 x 4
Technic, Plate 2 x 8 with 7 Holes
Technic, Plate 2 x 8 with 7 Holes
×2
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×6
Plate 2 x 6
Plate 2 x 6
×3
Technic, Brick 1 x 6 with Holes
Technic, Brick 1 x 6 with Holes
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×8
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×4
Plate 6 x 6
Plate 6 x 6
Dish 4 x 4 Inverted (Radar) with Solid Stud
Dish 4 x 4 Inverted (Radar) with Solid Stud
×2
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×12
Plate, Round 1 x 1
Plate, Round 1 x 1
×6
Plate, Round 1 x 1
Plate, Round 1 x 1
×9
Ladder 1 1/2 x 2 x 2
Ladder 1 1/2 x 2 x 2
×2
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×3
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×3
Slope, Curved 6 x 1 Inverted
Slope, Curved 6 x 1 Inverted
×2
Technic Bush 1/2 Smooth
Technic Bush 1/2 Smooth
×3
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×4
Slope 33 3 x 1
Slope 33 3 x 1
×4
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×3
Technic, Axle  7L
Technic, Axle 7L
×2
Hinge Tile 1 x 4 Locking Dual 1 Finger on Top
Hinge Tile 1 x 4 Locking Dual 1 Finger on Top
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×6
Antenna Small Base with Black Lever (4592 / 4593)
Antenna Small Base with Black Lever (4592 / 4593)
×3
Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type)
Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Brick, Round Corner 4 x 4 Macaroni with 3 Studs
Brick, Round Corner 4 x 4 Macaroni with 3 Studs
×4
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×3
Slope, Inverted 45 4 x 4 Double
Slope, Inverted 45 4 x 4 Double
×2
Wedge 4 x 3 Cut Back with Cutout, 2 Studs
Wedge 4 x 3 Cut Back with Cutout, 2 Studs
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×4
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Brick, Round 2 x 2 Dome Top
Brick, Round 2 x 2 Dome Top
×2
Minifigure, Weapon Gun, Blaster SW Long
Minifigure, Weapon Gun, Blaster SW Long
Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout
Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout
×2
Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout
Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout
×2
Plate, Round Corner 6 x 6
Plate, Round Corner 6 x 6
×2
Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
×2
Slope 65 2 x 1 x 2
Slope 65 2 x 1 x 2
×2
Brick 1 x 10
Brick 1 x 10
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
×4
Hinge Brick 2 x 2 Top Plate
Hinge Brick 2 x 2 Top Plate
Turntable 4 x 4 Square Base, Locking
Turntable 4 x 4 Square Base, Locking
Slope, Curved 4 x 1
Slope, Curved 4 x 1
×2
Cone 3 x 3 x 2
Cone 3 x 3 x 2
×2
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×6
Bar   6L with Stop Ring
Bar 6L with Stop Ring
×5
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Utensil Telescope
Minifigure, Utensil Telescope
×2
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×2
Wedge 3 x 2  Right
Wedge 3 x 2 Right
Wedge 3 x 2  Left
Wedge 3 x 2 Left
Tile 1 x 6
Tile 1 x 6
×2
Sticker Sheet for Set 8018 - (85164/4542710)
Sticker Sheet for Set 8018 - (85164/4542710)
Windscreen 8 x 6 x 2 Curved Sloped Sides
Windscreen 8 x 6 x 2 Curved Sloped Sides

Common questions about Armored Assault Tank (AAT)

How much is LEGO Armored Assault Tank (AAT) (8018-1) worth?

Armored Assault Tank (AAT) sells for an average of $76.76 used and $278.09 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 8018-1?

This set includes 4 minifigures: Battle Droid - Tan, Angled Arms ($1.59), Clone Trooper (Phase 1) - Large Eyes ($6.68), Yoda - Clone Wars, Light Bluish Gray Hair ($4.57), Super Battle Droid - Pearl Dark Gray, Blaster Arm ($5.86). The minifigures have a combined BrickLink value of $32.01. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Armored Assault Tank (AAT)?

The minifigures make up about 42% of the set value ($32.01 out of $76.76). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Armored Assault Tank (AAT) (8018-1) retired?

Yes, Armored Assault Tank (AAT) was released in 2009 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Armored Assault Tank (AAT) set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner