brick'em
T-16 Skyhopper vs Bantha Microfighters

T-16 Skyhopper vs Bantha Microfighters

75265-1·Star Wars·2020·2 minifigs·93 parts

Used Avg
$18.20
New Avg
$24.72
Add to your inventoryScan the minifigs

About T-16 Skyhopper vs Bantha Microfighters

T-16 Skyhopper vs Bantha Microfighters (75265-1) is a LEGO Star Wars set released in 2020, currently averaging $18.20 used on BrickLink. It comes with 2 minifigures worth a combined $8.04. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 93 pieces.

Part-out value

The minifigures account for about 44% of the set's value ($8.04 out of $18.20). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Minifigures in T-16 Skyhopper vs Bantha Microfighters (2)

T-16 Skyhopper Pilot - Detailed Belts
T-16 Skyhopper Pilot - Detailed Belts
sw1073$4.54
Tusken Raider - Dark Tan Head with Spikes, Diagonal Belt, Printed Legs
Tusken Raider - Dark Tan Head with Spikes, Diagonal Belt, Printed Legs
sw1074$3.50

Parts (93)

Technic, Gear 8 Tooth with Dual Face
Technic, Gear 8 Tooth with Dual Face
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×2
Cone 1 x 1 Inverted with Bar
Cone 1 x 1 Inverted with Bar
Plate, Modified 1 x 2 with Tow Ball on Side
Plate, Modified 1 x 2 with Tow Ball on Side
Plate, Modified 1 x 2 with Small Tow Ball Socket on End
Plate, Modified 1 x 2 with Small Tow Ball Socket on End
Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter
Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter
×3
Projectile Launcher, 1 x 2 Mini Blaster / Shooter
Projectile Launcher, 1 x 2 Mini Blaster / Shooter
×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×3
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
×2
Flag 2 x 2 Square
Flag 2 x 2 Square
×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×2
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×3
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
×2
Slope 45 2 x 1 with Cutout without Stud
Slope 45 2 x 1 with Cutout without Stud
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
×2
Wedge 2 x 1 x 2/3 Right
Wedge 2 x 1 x 2/3 Right
Wedge 2 x 1 x 2/3 Right
Wedge 2 x 1 x 2/3 Right
×7
Wedge 2 x 1 x 2/3 Left
Wedge 2 x 1 x 2/3 Left
Wedge 2 x 1 x 2/3 Left
Wedge 2 x 1 x 2/3 Left
×7
Brick 2 x 3
Brick 2 x 3
Brick 1 x 2
Brick 1 x 2
Brick 1 x 1
Brick 1 x 1
Brick 1 x 4
Brick 1 x 4
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 3
Plate 2 x 3
×6
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
Plate 1 x 2
Plate 1 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×9
Plate 1 x 2
Plate 1 x 2
×4
Plate 1 x 1
Plate 1 x 1
×2
Plate 1 x 1
Plate 1 x 1
×2
Tile 1 x 2
Tile 1 x 2
×2
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Technic, Liftarm Thick 1 x 7
Technic, Liftarm Thick 1 x 7
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×2
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×4
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
×3
Brick 1 x 3
Brick 1 x 3
Plate 1 x 3
Plate 1 x 3
×3
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×4
Bracket 1 x 1 - 1 x 1 Inverted
Bracket 1 x 1 - 1 x 1 Inverted
×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×3
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Antenna 4H - Flat Top
Antenna 4H - Flat Top
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×3
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
×2
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
×2
Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
×2
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×3
Slope, Inverted 33 3 x 1
Slope, Inverted 33 3 x 1
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×2
Slope 75 2 x 1 x 3 - Hollow Stud
Slope 75 2 x 1 x 3 - Hollow Stud
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×2
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×2
Wedge, Plate 2 x 4
Wedge, Plate 2 x 4
Brick, Modified 1 x 2 with Studs on 2 Sides
Brick, Modified 1 x 2 with Studs on 2 Sides
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×8
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Tile 1 x 3
Tile 1 x 3
×2
Tile 1 x 3
Tile 1 x 3
Tile 1 x 3
Tile 1 x 3
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×5
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×3
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
×2
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×4
Tauntaun / Wampa Horn Left
Tauntaun / Wampa Horn Left
×2
Tauntaun / Wampa Horn Right
Tauntaun / Wampa Horn Right
×2
Bar   3L (Bar Arrow)
Bar 3L (Bar Arrow)
×3
Bar   3L (Bar Arrow)
Bar 3L (Bar Arrow)
×2
Bar   1L with Top Stud and 2 Side Studs (Connector Perpendicular)
Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)
Minifigure, Weapon Gun, Blaster SW Small with Scope
Minifigure, Weapon Gun, Blaster SW Small with Scope
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Tile, Round 1 x 1 with Small White Circle / Eye Pupil Offset Pattern
Tile, Round 1 x 1 with Small White Circle / Eye Pupil Offset Pattern
×3
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted

Common questions about T-16 Skyhopper vs Bantha Microfighters

How much is LEGO T-16 Skyhopper vs Bantha Microfighters (75265-1) worth?

T-16 Skyhopper vs Bantha Microfighters sells for an average of $18.20 used and $24.72 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75265-1?

This set includes 2 minifigures: T-16 Skyhopper Pilot - Detailed Belts ($4.54), Tusken Raider - Dark Tan Head with Spikes, Diagonal Belt, Printed Legs ($3.50). The minifigures have a combined BrickLink value of $8.04. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO T-16 Skyhopper vs Bantha Microfighters?

The minifigures make up about 44% of the set value ($8.04 out of $18.20). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO T-16 Skyhopper vs Bantha Microfighters (75265-1) retired?

Yes, T-16 Skyhopper vs Bantha Microfighters was released in 2020 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my T-16 Skyhopper vs Bantha Microfighters set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner