Kylo Ren's Shuttle

About Kylo Ren's Shuttle

Kylo Ren's Shuttle (75256-1) is a LEGO Star Wars set from 2019 that sells for around $120.77 used on BrickLink. It includes 6 minifigures with a combined resale value of $78.92 — that's 65% of the set's price in figures alone. The most valuable is Supreme Leader Kylo Ren (Cape) at $24.46. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

Minifig value: $78.92 out of $120.77 total (65%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

• Sealed copies sell for $184.67 vs $120.77 used — a 53% premium. If you have this set new in sealed box (NISB), price it accordingly.
• Supreme Leader Kylo Ren (Cape) ($24.46) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
• 6 minifigures at $78.92 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.

Minifigures in Kylo Ren's Shuttle (6)

First Order Stormtrooper (Pointed Mouth Pattern)

sw0905$3.38

Supreme Leader Kylo Ren (Cape)

sw1061$24.46

General Pryde

sw1062$7.93

Knight of Ren (Ap'lek)

sw1063$19.82

Knight of Ren (Ushar)

sw1064$19.19

Sith Trooper - Episode 9

sw1065$4.13

Parts (250)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×8

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Tile, Modified 2 x 2 Inverted

×10

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Technic, Axle 1L with Pin 2L with Friction Ridges

×5

Technic, Axle Connector 2 x 3 Quadruple

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×3

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 2/3

×2

Plate, Round 4 x 4 with 2 x 2 Round Open Center

×4

Tile 2 x 2 Corner

×2

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×2

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×3

Minifigure, Weapon Gun, Blaster with Clip

Tile, Round 2 x 2 with Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×5

Bracket 3 x 2 x 1 1/3 with Bottom Tube

Plate, Modified 1 x 2 with Pin Hole on Bottom

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×7

Bar 4L / 2L Crossed (Lightsaber Blade)

Tile, Modified 1 x 2 Grille with Bottom Groove

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×17

Plate 2 x 2 Corner

×4

Slope, Curved 2 x 1 x 2/3 Inverted

×4

Wedge, Plate 2 x 2 Left

Wedge, Plate 2 x 2 Right

Tile 1 x 4

×2

Technic, Axle 3L with Stop

×12

Plate 2 x 12

×2

Brick 2 x 6

×2

Plate, Modified 2 x 2 with Pin on Bottom

×10

Brick, Modified 1 x 4 with Channel

×2

Brick, Modified 1 x 4 with Channel

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×16

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×8

Wedge, Plate 2 x 2 Cut Corner

×2

Technic, Pin with Short Friction Ridges

×44

Tile, Round Corner 2 x 2 Macaroni

×8

Plate, Modified 2 x 2 with Pin Holes

×2

Brick, Modified 1 x 2 with Grille / Fluted Profile

×3

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick, Modified 1 x 2 with Grille / Fluted Profile

×4

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Brick 2 x 4

×12

Brick 1 x 6

×6

Plate 2 x 4

×9

Plate 2 x 3

×2

Plate 2 x 3

×5

Plate 2 x 3

Plate 2 x 2

Plate 2 x 2

×22

Plate 2 x 2

×10

Plate 1 x 2

×4

Plate 1 x 2

×4

Plate 1 x 2

×17

Plate 1 x 2

×8

Plate 1 x 2

×5

Plate 1 x 2

×3

Plate 1 x 1

×3

Plate 4 x 12

Plate 4 x 10

Plate 4 x 4

×2

Plate 4 x 6

×4

Plate 4 x 6

×2

Plate 6 x 10

×8

Plate 2 x 8

×4

Plate 4 x 8

×6

Bar 4L (Lightsaber Blade / Wand)

×4

Slope 45 2 x 1

×8

Brick, Modified 1 x 4 with Studs on Side

×2

Slope 45 2 x 2 Double Convex Corner

×2

Wedge, Plate 4 x 4 Cut Corner

×18

Tile 2 x 2

×8

Tile 1 x 2

×4

Tile 1 x 2

×5

Tile 1 x 2 with SW Computer Pattern

×2

Tile 1 x 1

×7

Technic, Pin 3/4

×6

Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double

×4

Technic, Axle and Pin Connector Angled #1

×2

Technic, Liftarm Thin 1 x 5

Technic, Brick 1 x 14 with Holes

×2

Plate, Modified 1 x 2 with Door Rail

×2

Plate, Modified 1 x 2 with Door Rail

×4

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Technic, Pin 3L with Friction Ridges and Stop Bush

×6

Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3

×2

Technic, Axle 2L Notched

×2

Technic, Axle 2L Notched

×4

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle 5L

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×4

Technic, Axle 5.5L with Stop

Technic, Liftarm Thick 1 x 5

Technic, Liftarm Thin 1 x 4 - Axle Holes

Technic, Liftarm Thick 1 x 3

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 7

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

Technic, Brick 6 x 8 Open Center

×4

Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

×2

Technic, Pin 3L without Friction Ridges

×4

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Slope 33 3 x 2

×2

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes

×4

Plate 1 x 8

×5

Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper)

Brick 1 x 3

×2

Plate 1 x 3

×6

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Slope, Inverted 45 2 x 1

×4

Plate 1 x 6

×2

Plate 1 x 6

×2

Plate 1 x 6

×5

Slope 65 2 x 2 x 2 with Bottom Tube

×2

Bracket 1 x 1 - 1 x 1 Inverted

×2

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×10

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 8 with Holes

×9

Technic, Brick 1 x 8 with Holes

×2

Technic, Brick 1 x 16 with Holes

×4

Technic, Axle 6L

×2

Technic, Axle 12L

×2

Plate 1 x 4

×6

Plate 1 x 4

×4

Plate 1 x 4

×4

Plate 2 x 6

×2

Hinge Brick 1 x 4 Swivel Top

×4

Hinge Brick 1 x 4 Swivel Base

×4

Technic, Brick 1 x 12 with Holes

×2

Technic, Brick 1 x 12 with Holes

×2

Plate 6 x 6

Plate, Round 2 x 2 with Axle Hole

×2

Technic, Liftarm Thick 1 x 9

×8

Brick, Modified 1 x 1 with Headlight

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×26

Plate, Round 1 x 1

×3

Technic, Liftarm Thick 1 x 13

Tile 1 x 8

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Technic, Liftarm Thin 1 x 2 - Axle Holes

×4

Bracket 2 x 2 - 1 x 2 Centered

×4

Wedge 4 x 2 Right

×5

Wedge 4 x 2 Left

×5

Wedge, Plate 4 x 2 Right

×10

Wedge, Plate 4 x 2 Left

×10

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Technic Bush 1/2 Smooth

×3

Technic Bush 1/2 Smooth

×5

Technic, Pin 1/2 without Friction Ridges

×4

Technic, Pin 1/2 without Friction Ridges

×14

Slope, Inverted 33 3 x 1

×6

Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Top

×2

Technic, Axle 1L with Pin with Friction Ridges

×8

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Wedge 6 x 4 Triple Inverted Curved

×2

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Wedge, Plate 3 x 2 Left

Technic, Liftarm Thick 1 x 2

×2

Technic, Axle 7L

Plate 1 x 10

×8

Cone 1 x 1 with Top Groove

×4

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×3

Wedge, Plate 12 x 3 Left

×9

Wedge, Plate 12 x 3 Right

×9

Dish 2 x 2 Inverted (Radar)

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1 with Rounded Corners

×6

Slope, Curved 1 x 1 x 2/3 Double

×2

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

Wedge, Plate 2 x 4

Minifigure, Weapon Axe Head with Clip

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×7

Wedge, Plate 6 x 3 Right

×2

Wedge, Plate 6 x 3 Left

×2

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×2

Minifigure, Weapon Gun, Blaster SW Standard

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Plate, Round 4 x 4 with Hole

×2

Plate 1 x 12

×8

Plate 1 x 12

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×4

Slope 18 2 x 1 x 2/3 with Grille

×2

Tile, Modified 4 x 4 with Studs on Edge

×8

Tile, Modified 4 x 6 with Studs on Edges

×2

Panel 1 x 1 x 1 Corner

×4

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Brick, Modified 2 x 4 with Pins

Tile 1 x 3

×8

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Minifigure, Weapon Lightsaber Hilt Straight

×3

Minifigure, Weapon Lightsaber Hilt Straight

×2

Minifigure, Weapon Lightsaber Hilt Straight

×6

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×5

Technic, Axle 3L with Stud

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×2

Tile 1 x 6

×7

Technic, Shock Absorber 6.5L with Black Piston Rod - Hard Spring, Tight Coils in Middle

Plate, Round 1 x 1 with Open Stud

×3

Slope, Curved 10 x 1

×2

Slope 30 1 x 2 x 2/3

×14

Slope 30 1 x 2 x 2/3

×4

Slope 30 1 x 2 x 2/3 with Dark Red Horizon Screen and Gold Switches and Buttons Pattern

Tile 2 x 4

×8

Technic, Axle 4L with Stop

×4

Brick, Modified 1 x 1 with Stud on Side

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×4

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Brick, Modified Facet 2 x 2

×8

Bar 3L (Bar Arrow)

×2

Bar 3L (Bar Arrow)

×3

Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)

Plate, Modified 6 x 8 Trap Door Frame Horizontal (Long Pin Holders)

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Hinge Plate 2 x 2 Locking with 1 Finger on Top

×2

Plate, Modified 1 x 4 with 2 Studs without Groove

×9

Minifigure, Weapon Gun, Blaster SW Small with Scope

Panel 1 x 2 x 1 with Rounded Corners and Center Divider

×3

Slope, Curved 4 x 1 x 2/3 Double

×2

Bracket 1 x 2 - 2 x 4

×2

Minifigure Footgear Ice Skate

×3

Tile, Round 1 x 1

×10

Tile, Round 1 x 1 with SW Thermal Detonator with Red Button Pattern

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Minifigure, Utensil Ingot 1 x 2

×2

Bracket 1 x 2 - 1 x 2 Inverted

×4

Common questions about Kylo Ren's Shuttle

Explore more