brick'em
General Grievous' Combat Speeder

General Grievous' Combat Speeder

75199-1·Star Wars·2018·2 minifigs·71 parts

Used Avg
$49.49
New Avg
$99.72
Add to your inventoryScan the minifigs

About General Grievous' Combat Speeder

General Grievous' Combat Speeder (75199-1) is a LEGO Star Wars set from 2018 that sells for around $49.49 used on BrickLink. It includes 2 minifigures with a combined resale value of $39.73 — that's 80% of the set's price in figures alone. The most valuable is General Grievous - Bent Legs, White Armor at $31.15. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

Minifig value: $39.73 out of $49.49 total (80%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • Sealed copies sell for $99.72 vs $49.49 used — a 102% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • General Grievous - Bent Legs, White Armor ($31.15) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.

Minifigures in General Grievous' Combat Speeder (2)

General Grievous - Bent Legs, White Armor
General Grievous - Bent Legs, White Armor
sw0515$31.15
Mace Windu (Dark Tan Legs)
Mace Windu (Dark Tan Legs)
sw0889$8.58

Parts (71)

Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×6
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
×2
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
×3
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×3
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 1 x 1 with Open O Clip
×2
Technic, Axle 11L
Technic, Axle 11L
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Bracket 1 x 2 - 1 x 4 with Rounded Corners
×4
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×6
Wedge, Plate 2 x 2  Cut Corner
Wedge, Plate 2 x 2 Cut Corner
×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×5
Brick 2 x 4
Brick 2 x 4
×2
Brick 2 x 4
Brick 2 x 4
×2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 4
Brick 1 x 4
×2
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
Plate 1 x 1
Plate 1 x 1
×5
Plate 4 x 6
Plate 4 x 6
Plate 4 x 8
Plate 4 x 8
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
×2
Plate, Round Corner 4 x 4
Plate, Round Corner 4 x 4
×2
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
×4
Technic, Plate 2 x 6 with 5 Holes
Technic, Plate 2 x 6 with 5 Holes
Technic, Axle and Pin Connector Angled #5 - 112.5 degrees
Technic, Axle and Pin Connector Angled #5 - 112.5 degrees
×2
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
×2
Technic, Axle  5L
Technic, Axle 5L
Slope 33 3 x 2
Slope 33 3 x 2
×2
Plate 1 x 3
Plate 1 x 3
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×4
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×2
Technic, Plate 2 x 4 with 3 Holes
Technic, Plate 2 x 4 with 3 Holes
×4
Plate 1 x 4
Plate 1 x 4
×2
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Cone 2 x 2 x 2 - Open Stud
Cone 2 x 2 x 2 - Open Stud
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×3
Technic, Liftarm Thick 1 x 9
Technic, Liftarm Thick 1 x 9
×2
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×2
Technic, Axle  3L
Technic, Axle 3L
×2
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Antenna Small Base with Black Lever (4592 / 4593)
Antenna Small Base with Black Lever (4592 / 4593)
×3
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends
Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
Wheel Hard Plastic Small (22mm D. x 24mm)
Wheel Hard Plastic Small (22mm D. x 24mm)
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
×2
Cone 3 x 3 x 2
Cone 3 x 3 x 2
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×2
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
×7
Technic, Axle  2L with Reverser Handle Axle Connector
Technic, Axle 2L with Reverser Handle Axle Connector
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
×6
Sticker Sheet for Set 75199 - (36396/6211868)
Sticker Sheet for Set 75199 - (36396/6211868)
Tile 2 x 4
Tile 2 x 4
×2
Arm Mechanical, General Grievous with White Pattern on Left
Arm Mechanical, General Grievous with White Pattern on Left
Arm Mechanical, General Grievous with White Pattern on Right
Arm Mechanical, General Grievous with White Pattern on Right
Hinge Plate 2 x 2 Locking with 1 Finger on Top
Hinge Plate 2 x 2 Locking with 1 Finger on Top
Minifigure, Weapon Pike / Spear - Handle with Flat End
Minifigure, Weapon Pike / Spear - Handle with Flat End
×2
Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout
Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout
×4
Pneumatic Hose Connector with Axle Connector
Pneumatic Hose Connector with Axle Connector
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×4

Common questions about General Grievous' Combat Speeder

How much is LEGO General Grievous' Combat Speeder (75199-1) worth?

General Grievous' Combat Speeder sells for an average of $49.49 used and $99.72 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75199-1?

This set includes 2 minifigures: General Grievous - Bent Legs, White Armor ($31.15), Mace Windu (Dark Tan Legs) ($8.58). The minifigures have a combined BrickLink value of $39.73. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO General Grievous' Combat Speeder?

The minifigures alone are worth $39.73 (80% of the $49.49 set price), so parting out the figs individually on BrickLink can be profitable. Start with General Grievous - Bent Legs, White Armor at $31.15 — it's the highest-value figure in the set.

Is LEGO General Grievous' Combat Speeder (75199-1) retired?

Yes, General Grievous' Combat Speeder was released in 2018 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my General Grievous' Combat Speeder set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner