brick'em
Coruscant Police Gunship

Coruscant Police Gunship

75046-1·Star Wars·2014·3 minifigs·150 parts

Used Avg
$209.56
New Avg
$324.76
Add to your inventoryScan the minifigs

About Coruscant Police Gunship

Coruscant Police Gunship (75046-1) is a LEGO Star Wars set released in 2014, currently averaging $209.56 used on BrickLink. It comes with 3 minifigures worth a combined $120.15. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 150 pieces.

Part-out value

Minifig value: $120.15 out of $209.56 total (57%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • Sealed copies sell for $324.76 vs $209.56 used — a 55% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Clone Shock Trooper, Coruscant Guard (Phase 2) - Large Eyes ($41.30) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.

Minifigures in Coruscant Police Gunship (3)

Ahsoka Tano (Padawan) - Reddish Brown Backless Vest with Necklace and Belt
Ahsoka Tano (Padawan) - Reddish Brown Backless Vest with Necklace and Belt
sw0452$24.34
Clone Shock Trooper, Coruscant Guard (Phase 2) - Large Eyes
Clone Shock Trooper, Coruscant Guard (Phase 2) - Large Eyes
sw0531×2$41.30
Anakin Skywalker (Dark Brown Legs)
Anakin Skywalker (Dark Brown Legs)
sw0542$13.21

Parts (150)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
×2
Plate 3 x 3
Plate 3 x 3
×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×10
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
×2
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
×3
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×4
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4
Tile 1 x 4
×2
Plate 2 x 12
Plate 2 x 12
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×4
Brick, Modified Facet 3 x 3
Brick, Modified Facet 3 x 3
×2
Plate, Modified 2 x 2 with Pin on Bottom
Plate, Modified 2 x 2 with Pin on Bottom
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
×5
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
×2
Brick 2 x 4
Brick 2 x 4
Brick 2 x 3
Brick 2 x 3
×2
Brick 1 x 2
Brick 1 x 2
×12
Brick 1 x 2
Brick 1 x 2
×2
Brick 1 x 1
Brick 1 x 1
×6
Brick 1 x 4
Brick 1 x 4
×2
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 3
Plate 2 x 3
×8
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
×20
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
×17
Plate 1 x 1
Plate 1 x 1
×3
Plate 1 x 1
Plate 1 x 1
×7
Plate 1 x 1
Plate 1 x 1
×3
Plate 4 x 4
Plate 4 x 4
×2
Plate 4 x 6
Plate 4 x 6
×3
Plate 2 x 8
Plate 2 x 8
×2
Slope 45 2 x 4
Slope 45 2 x 4
×2
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×2
Slope 45 2 x 3
Slope 45 2 x 3
×2
Slope 45 2 x 2
Slope 45 2 x 2
×4
Slope 45 2 x 1
Slope 45 2 x 1
×2
Hinge Plate 1 x 8 with Angled Side Extensions
Hinge Plate 1 x 8 with Angled Side Extensions
×6
Wedge, Plate 4 x 4 Cut Corner
Wedge, Plate 4 x 4 Cut Corner
×4
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
×2
Brick 1 x 2 without Bottom Tube
Brick 1 x 2 without Bottom Tube
×8
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
Tile 2 x 2
×4
Tile 2 x 2
Tile 2 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
×4
Tile 1 x 1
Tile 1 x 1
×4
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
×2
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
×4
Technic, Axle and Pin Connector Angled #6 - 90 degrees
Technic, Axle and Pin Connector Angled #6 - 90 degrees
×2
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
×2
Technic, Pin 3L with Friction Ridges and Stop Bush
Technic, Pin 3L with Friction Ridges and Stop Bush
Technic, Axle  2L Notched
Technic, Axle 2L Notched
×8
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
×3
Technic, Axle and Pin Connector Angled #4 - 135 degrees
Technic, Axle and Pin Connector Angled #4 - 135 degrees
×2
Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)
Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)
×2
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 2 x 2 with Inside Stud Holder
×4
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 11
Technic, Liftarm Thick 1 x 11
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Slope 33 3 x 4
Slope 33 3 x 4
×2
Slope 33 3 x 2
Slope 33 3 x 2
×2
Plate 1 x 8
Plate 1 x 8
×4
Brick 1 x 3
Brick 1 x 3
×2
Plate 1 x 3
Plate 1 x 3
×6
Plate 1 x 3
Plate 1 x 3
×10
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×3
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×2
Plate 1 x 6
Plate 1 x 6
×5
Plate 1 x 6
Plate 1 x 6
×2
Plate 1 x 6
Plate 1 x 6
×13
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×3
Plate 1 x 4
Plate 1 x 4
×4
Plate 1 x 4
Plate 1 x 4
×7
Plate 1 x 4
Plate 1 x 4
×2
Plate 2 x 6
Plate 2 x 6
×3
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×8
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×5
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
×2
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
×2
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×7
Slope 33 3 x 1
Slope 33 3 x 1
×2
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
×6
Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove
Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove
×4
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Hinge Plate 1 x 2 Locking with 2 Fingers on End
×4
Cylinder Hemisphere 3 x 3 Ball Turret Socket with 2 x 2 Base
Cylinder Hemisphere 3 x 3 Ball Turret Socket with 2 x 2 Base
×2
Cylinder Hemisphere 3 x 3 Ball Turret
Cylinder Hemisphere 3 x 3 Ball Turret
×4
Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
×4
Hinge Plate 3 x 4 Locking Dual 2 Fingers
Hinge Plate 3 x 4 Locking Dual 2 Fingers
×2
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
×10
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Brick, Modified 1 x 1 with Studs on 4 Sides
Brick, Modified 1 x 1 with Studs on 4 Sides
Wedge, Plate 12 x 3 Left
Wedge, Plate 12 x 3 Left
Wedge, Plate 12 x 3 Right
Wedge, Plate 12 x 3 Right
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
×2
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×2
Wedge 4 x 4 Triple Inverted with Connections between 2 Studs
Wedge 4 x 4 Triple Inverted with Connections between 2 Studs
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Wedge, Plate 8 x 3 Pentagonal Right
Wedge, Plate 8 x 3 Pentagonal Right
×2
Wedge, Plate 8 x 3 Pentagonal Left
Wedge, Plate 8 x 3 Pentagonal Left
×2
Wedge, Plate 2 x 4
Wedge, Plate 2 x 4
×2
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
×2
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Right
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
×2
Wedge, Plate 6 x 3 Left
Wedge, Plate 6 x 3 Left
Minifigure, Weapon Gun, Blaster SW Standard
Minifigure, Weapon Gun, Blaster SW Standard
×2
Panel 1 x 6 x 5
Panel 1 x 6 x 5
×2
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes
×2
Brick, Modified 1 x 1 with U Clip (Vertical Grip) - Solid Stud
Brick, Modified 1 x 1 with U Clip (Vertical Grip) - Solid Stud
×2
Plate 1 x 12
Plate 1 x 12
×2
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
×3
Minifigure, Utensil Hose Nozzle Elaborate
Minifigure, Utensil Hose Nozzle Elaborate
×2
Slope 18 2 x 1 x 2/3 with Grille
Slope 18 2 x 1 x 2/3 with Grille
×2
Slope, Curved 4 x 1
Slope, Curved 4 x 1
×4
Tile, Modified 4 x 6 with Studs on Edges
Tile, Modified 4 x 6 with Studs on Edges
×2
Tile, Modified 4 x 6 with Studs on Edges
Tile, Modified 4 x 6 with Studs on Edges
×2
Tile 1 x 3
Tile 1 x 3
×2
Bar   6L with Stop Ring
Bar 6L with Stop Ring
×3
Minifigure, Weapon Lightsaber Hilt Straight
Minifigure, Weapon Lightsaber Hilt Straight
×4
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×6
Technic, Axle  2L with Reverser Handle Axle Connector
Technic, Axle 2L with Reverser Handle Axle Connector
×2
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
×5
Technic, Axle  3L with Stud
Technic, Axle 3L with Stud
Tile 1 x 6
Tile 1 x 6
×2
Tile 1 x 6
Tile 1 x 6
×2
Sticker Sheet for Set 75046 - (16420/6060177)
Sticker Sheet for Set 75046 - (16420/6060177)
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
×10
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
×2
Windscreen 6 x 6 x 2 Canopy
Windscreen 6 x 6 x 2 Canopy
×2
Aircraft Fuselage Aft Section Curved Top 6 x 10
Aircraft Fuselage Aft Section Curved Top 6 x 10
Aircraft Fuselage Aft Section Curved Bottom 6 x 10
Aircraft Fuselage Aft Section Curved Bottom 6 x 10
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Clip with Center Cut on Top
×2
Hinge Plate 2 x 2 Locking with 1 Finger on Top
Hinge Plate 2 x 2 Locking with 1 Finger on Top
×4
Brick and Axle Separator
Brick and Axle Separator
Tile, Round 1 x 1
Tile, Round 1 x 1
×3
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 1 x 2 Inverted
×4

Common questions about Coruscant Police Gunship

How much is LEGO Coruscant Police Gunship (75046-1) worth?

Coruscant Police Gunship sells for an average of $209.56 used and $324.76 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75046-1?

This set includes 3 minifigures: Ahsoka Tano (Padawan) - Reddish Brown Backless Vest with Necklace and Belt ($24.34), Clone Shock Trooper, Coruscant Guard (Phase 2) - Large Eyes ($41.30), Anakin Skywalker (Dark Brown Legs) ($13.21). The minifigures have a combined BrickLink value of $120.15. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Coruscant Police Gunship?

The minifigures make up about 57% of the set value ($120.15 out of $209.56). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Coruscant Police Gunship (75046-1) retired?

Yes, Coruscant Police Gunship was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Coruscant Police Gunship set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner