brick'em
TIE Fighter

TIE Fighter

7263-1·Star Wars·2005·2 minifigs·45 parts

Used Avg
$63.92
New Avg
$168.58
Add to your inventoryScan the minifigs

About TIE Fighter

TIE Fighter (7263-1) is a LEGO Star Wars set from 2005 that sells for around $63.92 used on BrickLink. It includes 2 minifigures with a combined resale value of $58.16 — that's 91% of the set's price in figures alone. The most valuable is Darth Vader - Trans-Red Light-Up Lightsaber at $52.90. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

The minifigures in this set are worth $58.16 individually on BrickLink — 91% of the complete set price ($63.92). The figs carry almost all the value here. If you find this set incomplete or are buying to part out, the minifigures are where the money is.

Seller notes

  • Sealed copies sell for $168.58 vs $63.92 used — a 164% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Darth Vader - Trans-Red Light-Up Lightsaber ($52.90) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2005). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in TIE Fighter (2)

Imperial TIE Fighter Pilot - Reddish Brown Head
Imperial TIE Fighter Pilot - Reddish Brown Head
sw0035a$5.26
Darth Vader - Trans-Red Light-Up Lightsaber
Darth Vader - Trans-Red Light-Up Lightsaber
sw0117$52.90

Parts (45)

Brick 2 x 2 Corner
Brick 2 x 2 Corner
×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×37
Wedge, Plate 3 x 6 Cut Corners
Wedge, Plate 3 x 6 Cut Corners
×4
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
×2
Brick, Modified 2 x 2 with Pins and Axle Hole
Brick, Modified 2 x 2 with Pins and Axle Hole
×4
Brick 2 x 3
Brick 2 x 3
×2
Brick 2 x 2
Brick 2 x 2
×4
Brick 1 x 2
Brick 1 x 2
×3
Plate 2 x 4
Plate 2 x 4
×11
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×3
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout
Plate 4 x 12
Plate 4 x 12
×4
Plate 4 x 4
Plate 4 x 4
Wedge, Plate 12 x 6 Left
Wedge, Plate 12 x 6 Left
×4
Wedge, Plate 12 x 6 Right
Wedge, Plate 12 x 6 Right
×4
Windscreen 3 x 6 x 5 Bubble with SW 8 Spoke Radial Light Bluish Gray Thick Lines Pattern
Windscreen 3 x 6 x 5 Bubble with SW 8 Spoke Radial Light Bluish Gray Thick Lines Pattern
Slope, Inverted 65 6 x 6 x 2 Quad with Cutouts
Slope, Inverted 65 6 x 6 x 2 Quad with Cutouts
×2
Slope 45 2 x 2
Slope 45 2 x 2
×2
Slope 45 2 x 1
Slope 45 2 x 1
×2
Slope 45 2 x 1 Double with Inside Bar
Slope 45 2 x 1 Double with Inside Bar
×2
Slope 45 2 x 2 Double Concave
Slope 45 2 x 2 Double Concave
×2
Slope 45 2 x 1 Double / Inverted without Bottom Tube or Bottom Stud Holder
Slope 45 2 x 1 Double / Inverted without Bottom Tube or Bottom Stud Holder
×2
Tile 1 x 2 with SW Computer Pattern
Tile 1 x 2 with SW Computer Pattern
Plate 1 x 3
Plate 1 x 3
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×2
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×3
Plate 1 x 4
Plate 1 x 4
×4
Slope, Inverted 33 3 x 2 with Flat Bottom Pin without Connections between Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin without Connections between Studs
×8
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Top Plate
Hinge Brick 1 x 2 Top Plate
Dish 4 x 4 Inverted (Radar) with Solid Stud
Dish 4 x 4 Inverted (Radar) with Solid Stud
Dish 4 x 4 Inverted (Radar) with Solid Stud with Star Wars TIE Hatch Black and White Pattern
Dish 4 x 4 Inverted (Radar) with Solid Stud with Star Wars TIE Hatch Black and White Pattern
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
Tile, Round 2 x 2 with SW Imperial Logo Pattern
Tile, Round 2 x 2 with SW Imperial Logo Pattern
×2
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
×4
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
×4
Plate 1 x 10
Plate 1 x 10
×4
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge

Common questions about TIE Fighter

How much is LEGO TIE Fighter (7263-1) worth?

TIE Fighter sells for an average of $63.92 used and $168.58 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7263-1?

This set includes 2 minifigures: Imperial TIE Fighter Pilot - Reddish Brown Head ($5.26), Darth Vader - Trans-Red Light-Up Lightsaber ($52.90). The minifigures have a combined BrickLink value of $58.16. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO TIE Fighter?

The minifigures alone are worth $58.16 (91% of the $63.92 set price), so parting out the figs individually on BrickLink can be profitable. Start with Darth Vader - Trans-Red Light-Up Lightsaber at $52.90 — it's the highest-value figure in the set.

Is LEGO TIE Fighter (7263-1) retired?

Yes, TIE Fighter was released in 2005 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my TIE Fighter set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner