brick'em
Robo Stalker

Robo Stalker

2153-1·Space·1997·1 minifig·96 parts

Used Avg
$94.48
New Avg
$197.79
Add to your inventoryScan the minifigs

About Robo Stalker

Robo Stalker (2153-1) is a LEGO Space set released in 1997, currently averaging $94.48 used on BrickLink. It comes with 1 minifigure worth a combined $20.74. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 96 pieces.

Part-out value

The minifigures account for about 22% of the set's value ($20.74 out of $94.48). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.

Seller notes

  • Sealed copies sell for $197.79 vs $94.48 used — a 109% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • This is a vintage set (1997). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Robo Stalker (1)

RoboForce Red with Printed Legs
RoboForce Red with Printed Legs
sp067×2$10.37

Parts (96)

Sticker Sheet for Set 2153 - (71624/4109652)
Sticker Sheet for Set 2153 - (71624/4109652)
Brick 2 x 2 Corner
Brick 2 x 2 Corner
×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×6
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×3
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×3
Wedge, Plate 3 x 6 Cut Corners
Wedge, Plate 3 x 6 Cut Corners
×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×4
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Hinge Plate 1 x 4 Swivel (2429 / 2430)
×4
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4 with RoboForce Gold, Red and Blue Circuitry Pattern
Tile 1 x 4 with RoboForce Gold, Red and Blue Circuitry Pattern
×2
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
Bracket 1 x 2 - 1 x 4
Bracket 1 x 2 - 1 x 4
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×2
Slope, Inverted 75 2 x 1 x 3
Slope, Inverted 75 2 x 1 x 3
×4
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 3 Cut Corner
×4
Hinge Plate 1 x 2 with 3 Fingers on Side
Hinge Plate 1 x 2 with 3 Fingers on Side
×2
Windscreen 4 x 4 x 4 1/3 Helicopter
Windscreen 4 x 4 x 4 1/3 Helicopter
Technic Slope 6 x 1 x 1 2/3
Technic Slope 6 x 1 x 1 2/3
×6
Wedge 6 x 6 Cutout (Train Roof)
Wedge 6 x 6 Cutout (Train Roof)
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×7
Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder)
Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder)
×3
Brick 2 x 4
Brick 2 x 4
×2
Wing Plate Bi-level 12 x 9 x 2 1/3
Wing Plate Bi-level 12 x 9 x 2 1/3
Plate 2 x 4
Plate 2 x 4
×5
Plate 2 x 4
Plate 2 x 4
×4
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 3
Plate 2 x 3
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 1 x 2
Plate 1 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 4 x 4
Plate 4 x 4
×2
Plate 2 x 8
Plate 2 x 8
×2
Plate 2 x 8
Plate 2 x 8
Slope 45 2 x 2
Slope 45 2 x 2
×10
Slope 45 2 x 2
Slope 45 2 x 2
×6
Slope 45 2 x 1
Slope 45 2 x 1
×10
Tile 2 x 2
Tile 2 x 2
Tile 1 x 2 with RoboForce Gold 'ROBO' and Red Circuitry Pattern
Tile 1 x 2 with RoboForce Gold 'ROBO' and Red Circuitry Pattern
×5
Tile 1 x 1
Tile 1 x 1
×3
Slope 33 3 x 2
Slope 33 3 x 2
×2
Slope 33 3 x 2 with RoboForce Gold 'ROBO' and Blue and Yellow Circuitry Pattern
Slope 33 3 x 2 with RoboForce Gold 'ROBO' and Blue and Yellow Circuitry Pattern
×2
Arch 1 x 8 x 2
Arch 1 x 8 x 2
×2
Turntable 4 x 4 Square Base with (Same Color) Top (3403 / 3404)
Turntable 4 x 4 Square Base with (Same Color) Top (3403 / 3404)
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
Plate 1 x 8
×5
Plate 1 x 3
Plate 1 x 3
×2
Plate 1 x 3
Plate 1 x 3
×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×4
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
×2
Plate 1 x 6
Plate 1 x 6
×2
Plate 1 x 6
Plate 1 x 6
×2
Plate 1 x 4
Plate 1 x 4
×3
Plate 1 x 4
Plate 1 x 4
×6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×2
Plate 2 x 10
Plate 2 x 10
×2
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
×3
Wedge, Plate 8 x 4 Wing Left
Wedge, Plate 8 x 4 Wing Left
Wedge, Plate 8 x 4 Wing Right
Wedge, Plate 8 x 4 Wing Right
Wedge, Plate 4 x 4 Wing Right
Wedge, Plate 4 x 4 Wing Right
Wedge, Plate 4 x 4 Wing Left
Wedge, Plate 4 x 4 Wing Left
Support 2 x 2 x 2 Stand with Complete Hole
Support 2 x 2 x 2 Stand with Complete Hole
Bracket 2 x 2 - 2 x 2 with 2 Holes
Bracket 2 x 2 - 2 x 2 with 2 Holes
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×2
Hinge Vehicle Roof 4 x 4
Hinge Vehicle Roof 4 x 4
Hinge Plate 1 x 2 with 3 Fingers on End - Hollow Studs
Hinge Plate 1 x 2 with 3 Fingers on End - Hollow Studs
×10
Hinge Plate 1 x 2 with 2 Fingers on End - Hollow Studs
Hinge Plate 1 x 2 with 2 Fingers on End - Hollow Studs
×12
Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (Underside Attachment Positions at 90 degrees)
Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (Underside Attachment Positions at 90 degrees)
Hinge Plate 1 x 4
Hinge Plate 1 x 4
×2
Container, Box 2 x 2 x 2
Container, Box 2 x 2 x 2
×2
Container, Box 2 x 2 x 2 Door with Slot
Container, Box 2 x 2 x 2 Door with Slot
×2
Minifigure, Utensil Camera with Side Sight (Space Gun)
Minifigure, Utensil Camera with Side Sight (Space Gun)
Hinge Tile 1 x 2 1/2 with 2 Fingers on Top
Hinge Tile 1 x 2 1/2 with 2 Fingers on Top
×3
Cone 1 x 1
Cone 1 x 1
×2
Antenna Small Base with Yellow Lever (4592 / 4593)
Antenna Small Base with Yellow Lever (4592 / 4593)
×5
Antenna Small Base with Light Gray Lever (4592 / 4593)
Antenna Small Base with Light Gray Lever (4592 / 4593)
×3
Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle
Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle
Bracket 3 x 2 - 2 x 2 Inverted (Space Seat)
Bracket 3 x 2 - 2 x 2 Inverted (Space Seat)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
×2
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
×4
Panel 1 x 2 x 1
Panel 1 x 2 x 1
Windscreen 3 x 4 x 4 Inverted
Windscreen 3 x 4 x 4 Inverted
Wedge 4 x 4 Triple without Stud Notches
Wedge 4 x 4 Triple without Stud Notches
×2
Wedge 4 x 4 Triple without Stud Notches with RoboForce Gold and Red Circuitry Pattern
Wedge 4 x 4 Triple without Stud Notches with RoboForce Gold and Red Circuitry Pattern
×2
Minifigure, Utensil Tool Chainsaw Blade
Minifigure, Utensil Tool Chainsaw Blade
Wedge 6 x 4 Cutout without Stud Notches
Wedge 6 x 4 Cutout without Stud Notches
×4
Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Solid Pins with Space Shuttle Wheels
Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Solid Pins with Space Shuttle Wheels
×4

Common questions about Robo Stalker

How much is LEGO Robo Stalker (2153-1) worth?

Robo Stalker sells for an average of $94.48 used and $197.79 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 2153-1?

This set includes 1 minifigure: RoboForce Red with Printed Legs ($10.37). The minifigures have a combined BrickLink value of $20.74. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Robo Stalker?

The minifigures make up about 22% of the set value ($20.74 out of $94.48). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Robo Stalker (2153-1) retired?

Yes, Robo Stalker was released in 1997 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Robo Stalker set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Space setsSpace minifiguresMost valuable Space figsFree scanner