How much is LEGO Tiger Shark Attack (7773-1) worth?

Tiger Shark Attack sells for an average of $33.32 used on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7773-1?

This set includes 2 minifigures: Aquaraider Diver 8 with Black Flippers ($2.11), Aquaraider Diver 6 with Black Flippers ($2.10). The minifigures have a combined BrickLink value of $4.20. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Tiger Shark Attack?

The minifigures make up about 13% of the set value ($4.20 out of $33.32). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Tiger Shark Attack (7773-1) retired?

Yes, Tiger Shark Attack was released in 2007 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Tiger Shark Attack set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Tiger Shark Attack

7773-1·LEGO·2007·2 minifigs·166 parts

Used Avg

$33.32

New Avg

$33.32

Showing used price

Add to your inventory Scan the minifigs

About Tiger Shark Attack

Tiger Shark Attack (7773-1) is a LEGO LEGO set released in 2007, currently averaging $33.32 used on BrickLink. It comes with 2 minifigures worth a combined $4.20. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 166 pieces.

Parts (166)

Tile, Modified 1 x 2 Grille with Bottom Groove

×5

Tile 1 x 4

Tile 1 x 4 with 3 Black Chevrons and Silver Hose Pattern

×2

Tile, Modified 1 x 2 with Bar Handle

Bracket 1 x 2 - 1 x 4

×2

Plate, Modified 2 x 2 with Pin Hole

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Tile, Modified 1 x 1 with Clip

×3

Antenna Whip 8H

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×3

Technic, Pin with Short Friction Ridges

×5

Brick 2 x 4

Brick 2 x 2

Minifigure, Utensil Handlebars

Brick 1 x 2

×3

Brick 1 x 2

×2

Brick 1 x 2

×5

Minifigure, Weapon Spear Gun with Rounded Trigger and Thin Spear Base

×2

Brick 1 x 4

×2

Rock 1 x 1 Jewel 24 Facet

Plate 2 x 4

×3

Plate 2 x 2

×5

Plate 1 x 2

×8

Plate 1 x 2

×2

Brick, Modified 1 x 2 with Bar Handle on Side

Plate 1 x 1

×2

Plate 1 x 1

×2

Plate 1 x 1

×6

Plate 4 x 4

×2

Plate 6 x 10

Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End

×2

Arm Mechanical, Battle Droid

×3

Slope 45 2 x 1

×6

Slope 45 2 x 1

×3

Brick, Round 1 x 1

Vehicle, Fairing 1 x 4 Side Flaring Intake with 2 Pins

×2

Tile 2 x 2

Tile 2 x 2 with Black Trident Pattern (Aquaraiders II Logo)

×2

Tile 1 x 2

×3

Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern

Tile 1 x 1

×3

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×4

Technic, Brick 1 x 14 with Holes

×2

Technic, Axle Connector with Axle Hole

×4

Wedge, Plate 4 x 6 Cut Corners

Technic, Brick 1 x 2 with Axle Hole

×4

Technic Block 3 x 5 x 1 2/3

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Technic, Pin without Friction Ridges

×3

Technic, Axle 4L

×5

Technic, Axle 8L

×2

Plate 1 x 4

×3

Plate 1 x 4

×2

Technic Bush

×5

Slope, Inverted 33 3 x 2 with Flat Bottom Pin without Connections between Studs

×2

Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)

×2

Plate 2 x 6

×2

Technic, Brick 1 x 6 with Holes

×6

Plate, Round 2 x 2 with Axle Hole

Bionicle Weapon Long Axle Trident

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×2

Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)

×4

Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)

×4

Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar

×2

Wedge 6 x 2 Right

Wedge 6 x 2 Left

Wedge 4 x 2 Right

Wedge 4 x 2 Left

Wedge, Plate 4 x 2 Right

×2

Wedge, Plate 4 x 2 Left

×2

Slope, Curved 6 x 1 with 2 Studs

×2

Slope, Curved 6 x 1 with 2 Studs

×2

Slope, Curved 6 x 1 Inverted

×2

Technic, Pin 1/2 without Friction Ridges

×4

Technic, Axle 1L with Pin with Friction Ridges

×4

Minifigure, Utensil Camera with Side Sight (Space Gun)

Wedge, Plate 4 x 4

×2

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Technic, Liftarm Thick 1 x 2

×2

Technic, Axle 7L

Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type)

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type)

×2

Tail Shuttle, Small

Flag 2 x 2 Trapezoid

Bracket 1 x 2 - 2 x 2

×2

Hinge Tile 1 x 4 Locking Dual 1 Finger on Top

Minifigure, Weapon Pike / Spear - Handle with Round End

Minifigure, Utensil Tool Mallet / Hammer

Wedge 16 x 4 Triple Curved with Reinforcements

Technic, Axle Connector Double - Flexible Rubber

×2

Windscreen 10 x 6 x 2 Curved with Shark Eyes Pattern

Cone 1 x 1

×2

Antenna Small Base with Black Lever (4592 / 4593)

×3

Windscreen 8 x 4 x 2 Curved with Locking Dual 2 Fingers

Cockpit 10 x 6 x 2 Curved

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Socket

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Horizontal

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Wedge 4 x 4 Triple Inverted with Connections between 2 Studs

Wedge 6 x 4 Triple Inverted with Connections between 2 Studs

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

Technic, Axle Connector Hub with 4 Bars and Pin Hole

Bar 1L with Clip Mechanical Claw (Undetermined Type)

×2

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

Wedge 3 1/2 x 4 with Stud Notches

Slope, Curved 3 x 1

×4

Wedge 10 x 3 Left

Wedge 10 x 3 Right

Barb / Claw / Horn / Tooth - Small

×11

Slope 30 1 x 1 x 2/3

×8

Slope 30 1 x 1 x 2/3

×4

Slope 30 1 x 1 x 2/3

×2

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Plant Vine Seaweed / Appendage Spiked / Bionicle Spine - Flexible Rubber

×2

Brick, Round 2 x 2 Dome Top

×2

Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern

Projectile Launcher, Cannon, Flat Bottom

Plate, Modified 1 x 1 with U Clip (Horizontal Grip)

×2

Plate, Modified 1 x 1 with U Clip (Horizontal Grip)

×2

Propeller 3 Blade 3 Diameter with Axle Hole

×2

Brick 1 x 10

×2

Tail Shuttle

×3

Minifigure, Utensil Dish 3 x 3

Technic, Brick 1 x 1 with Hole

×2

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×4

Hose, Ribbed 7mm D. 7L / 5.6cm

×2

Tiger Shark Attack

About Tiger Shark Attack

Part-out value

Minifigures in Tiger Shark Attack (2)

Parts (166)

Common questions about Tiger Shark Attack

How much is LEGO Tiger Shark Attack (7773-1) worth?

What minifigures come in LEGO set 7773-1?

Is it worth parting out LEGO Tiger Shark Attack?

Is LEGO Tiger Shark Attack (7773-1) retired?

How do I check if my Tiger Shark Attack set is complete?

More LEGO sets

Explore more

Company

Legal