brick'em
Shark's Crystal Cave

Shark's Crystal Cave

6190-1·LEGO·1996·2 minifigs·114 parts

Used Avg
$125.22
New Avg
$321.88
Add to your inventoryScan the minifigs

About Shark's Crystal Cave

Shark's Crystal Cave (6190-1) is a LEGO LEGO set released in 1996, currently averaging $125.22 used on BrickLink. It comes with 2 minifigures worth a combined $5.94. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 114 pieces.

Part-out value

The minifigures make up only 5% of this set's value ($5.94 out of $125.22). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Seller notes

  • Sealed copies sell for $321.88 vs $125.22 used — a 157% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • This is a vintage set (1996). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Shark's Crystal Cave (2)

Aquashark 1 with Black Flippers
Aquashark 1 with Black Flippers
aqu006a$2.47
Aquashark 2
Aquashark 2
aqu007$3.47

Parts (114)

Windscreen 4 x 4 x 2 Canopy Extender with Hinges
Windscreen 4 x 4 x 2 Canopy Extender with Hinges
Brick 2 x 2 Corner
Brick 2 x 2 Corner
×5
Panel 1 x 2 x 3 - Solid Studs
Panel 1 x 2 x 3 - Solid Studs
Panel 1 x 2 x 3 - Solid Studs
Panel 1 x 2 x 3 - Solid Studs
Wedge 3 1/2 x 4 without Stud Notches
Wedge 3 1/2 x 4 without Stud Notches
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
Windscreen 6 x 6 x 2 Octagonal Canopy with Axle Hole
Windscreen 6 x 6 x 2 Octagonal Canopy with Axle Hole
×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×4
Tile 1 x 4
Tile 1 x 4
×2
Tile 1 x 4
Tile 1 x 4
×3
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
×5
Hinge Bar with 3 Fingers and End Stud (Control Lever)
Hinge Bar with 3 Fingers and End Stud (Control Lever)
×2
Brick, Modified 2 x 4 x 2 with Studs on Sides
Brick, Modified 2 x 4 x 2 with Studs on Sides
×2
Hinge Window Frame 1 x 4 x 3 with Octagonal Panel
Hinge Window Frame 1 x 4 x 3 with Octagonal Panel
×2
Plate 2 x 12
Plate 2 x 12
Wedge 3 x 3 x 2 Facet Top (Slope Corner)
Wedge 3 x 3 x 2 Facet Top (Slope Corner)
×2
Bar 1 x 8 x 2
Bar 1 x 8 x 2
×4
Windscreen 10 x 4 x 2 1/3 Canopy with Black Aquasharks Pattern
Windscreen 10 x 4 x 2 1/3 Canopy with Black Aquasharks Pattern
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Shark Body
Shark Body
Shark Head with Pointed Nose and Debossed Eyes
Shark Head with Pointed Nose and Debossed Eyes
Antenna Whip 8H
Antenna Whip 8H
×2
Panel 2 x 4 x 3 1/3 with Hinge with Black and Red Aquazone Pattern
Panel 2 x 4 x 3 1/3 with Hinge with Black and Red Aquazone Pattern
Minifigure Footgear Flippers, 2 on Sprue
Minifigure Footgear Flippers, 2 on Sprue
Magnet Holder 2 x 3 with Clips and Pin Hole
Magnet Holder 2 x 3 with Clips and Pin Hole
Magnet Holder Tile 2 x 2 - Tall Arms with Shallow Notch
Magnet Holder Tile 2 x 2 - Tall Arms with Shallow Notch
×2
Brick 2 x 4
Brick 2 x 4
×3
Arm Holder Brick 1 x 2 with 2 Horizontal Fingers
Arm Holder Brick 1 x 2 with 2 Horizontal Fingers
×2
Brick 2 x 2
Brick 2 x 2
×4
Brick 1 x 2
Brick 1 x 2
×12
Brick 1 x 1
Brick 1 x 1
×6
Brick 1 x 4
Brick 1 x 4
×2
Brick 1 x 4
Brick 1 x 4
×5
Plate 2 x 4
Plate 2 x 4
Plate 2 x 2
Plate 2 x 2
×4
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
Plate 1 x 2
×6
Plate 6 x 12
Plate 6 x 12
Plate 4 x 12
Plate 4 x 12
Plate 4 x 10
Plate 4 x 10
Slope 45 2 x 2
Slope 45 2 x 2
Slope 45 2 x 2 with Aquazone Pattern
Slope 45 2 x 2 with Aquazone Pattern
Slope 45 2 x 1
Slope 45 2 x 1
×6
Tile 2 x 2
Tile 2 x 2
Tail with Rounded Top with Aquazone Aquashark Blue Shark with Red 'X' Pattern on Both Sides
Tail with Rounded Top with Aquazone Aquashark Blue Shark with Red 'X' Pattern on Both Sides
Arm Piece Straight with 2 and 3 Fingers
Arm Piece Straight with 2 and 3 Fingers
×4
Arm Piece Straight with 2 and 3 Fingers
Arm Piece Straight with 2 and 3 Fingers
×4
Plate 1 x 3
Plate 1 x 3
×2
Fence 1 x 4 x 1 Lattice
Fence 1 x 4 x 1 Lattice
×3
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
×6
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
Plate 1 x 6
Plate 1 x 6
×2
Plate 1 x 4
Plate 1 x 4
×4
Technic, Axle  1L with Pin without Friction Ridges with Round Hole
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
×5
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×2
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
×2
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Glass for Window 1 x 4 x 3
Glass for Window 1 x 4 x 3
×2
Wedge, Plate 8 x 4 Wing Left
Wedge, Plate 8 x 4 Wing Left
×2
Wedge, Plate 8 x 4 Wing Right
Wedge, Plate 8 x 4 Wing Right
×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
×2
Baseplate, Raised 32 x 32 Crater Plate with Crater Studs with Underwater Pattern
Baseplate, Raised 32 x 32 Crater Plate with Crater Studs with Underwater Pattern
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2
Window 1 x 4 x 3 Train - Hollow Studs
Window 1 x 4 x 3 Train - Hollow Studs
×2
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×2
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
×4
Arm Piece Turned with 2 and 3 Fingers
Arm Piece Turned with 2 and 3 Fingers
×4
Tile 1 x 8
Tile 1 x 8
Arm Grab Jaw Holder
Arm Grab Jaw Holder
Arm Grab Jaw
Arm Grab Jaw
×2
Hinge Plate 1 x 2 with 3 Fingers on End - Hollow Studs
Hinge Plate 1 x 2 with 3 Fingers on End - Hollow Studs
×2
Slope 33 3 x 1
Slope 33 3 x 1
×2
Hinge Plate 1 x 4
Hinge Plate 1 x 4
×3
Container, Box 2 x 2 x 2
Container, Box 2 x 2 x 2
×2
Container, Box 2 x 2 x 2 Door with Slot
Container, Box 2 x 2 x 2 Door with Slot
×2
Minifigure, Weapon Knives, 2 on Sprue
Minifigure, Weapon Knives, 2 on Sprue
Windscreen 6 x 4 x 2 Canopy
Windscreen 6 x 4 x 2 Canopy
Plate 1 x 10
Plate 1 x 10
×2
Plate 1 x 10
Plate 1 x 10
Hinge Tile 1 x 2 1/2 with 2 Fingers on Top
Hinge Tile 1 x 2 1/2 with 2 Fingers on Top
×4
Cone 1 x 1
Cone 1 x 1
×2
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
×2
Hinge Tile 1 x 4
Hinge Tile 1 x 4
×2
Slope 45 4 x 4 Double with Hinge
Slope 45 4 x 4 Double with Hinge
×2
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Wedge, Plate 3 x 4 without Stud Notches
Panel 1 x 2 x 1
Panel 1 x 2 x 1
×4
Tail Wedge
Tail Wedge
Rock 1 x 1 Crystal 5 Point
Rock 1 x 1 Crystal 5 Point
×2
Minifigure, Weapon Harpoons, 2 on Sprue
Minifigure, Weapon Harpoons, 2 on Sprue
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
×2
Bar 7 x 3 with 2 U Clips (Ladder)
Bar 7 x 3 with 2 U Clips (Ladder)
Brick, Modified Octagonal 2 x 2 x 3 1/3
Brick, Modified Octagonal 2 x 2 x 3 1/3
×2
Cone 2 x 2 x 1 2/3 Octagonal
Cone 2 x 2 x 1 2/3 Octagonal
Propeller Housing
Propeller Housing
×2
Propeller 3 Blade 3 Diameter with Axle Hole
Propeller 3 Blade 3 Diameter with Axle Hole
×2
Propeller 3 Blade 3 Diameter with Axle Hole
Propeller 3 Blade 3 Diameter with Axle Hole
×3
Brick, Modified Octagonal 2 x 2 x 3 1/3 with Side Studs
Brick, Modified Octagonal 2 x 2 x 3 1/3 with Side Studs
Brick, Modified Octagonal 2 x 2 x 3 1/3 Corner
Brick, Modified Octagonal 2 x 2 x 3 1/3 Corner
×2
Bar 9 x 13 Grille
Bar 9 x 13 Grille
Cockpit 11 x 4 x 2 2/3 Inverted Slope
Cockpit 11 x 4 x 2 2/3 Inverted Slope
Cockpit 11 x 4 x 2 2/3 Inverted Slope
Cockpit 11 x 4 x 2 2/3 Inverted Slope
Brick, Modified 2 x 4 x 2 with Holes on Sides
Brick, Modified 2 x 4 x 2 with Holes on Sides
Plant Prickly Bush 2 x 2 x 4
Plant Prickly Bush 2 x 2 x 4
Plant Prickly Bush 2 x 2 x 3 Extension with 2 x 2 Center
Plant Prickly Bush 2 x 2 x 3 Extension with 2 x 2 Center
Plant Prickly Bush 2 x 2 x 3 Extension with 2 x 2 Center
Plant Prickly Bush 2 x 2 x 3 Extension with 2 x 2 Center
Rock Panel 4 x 10 x 6 Rectangular (BURP)
Rock Panel 4 x 10 x 6 Rectangular (BURP)
Wedge, Plate 8 x 8 with 3 x 4 Cutout
Wedge, Plate 8 x 8 with 3 x 4 Cutout
Brick 1 x 10
Brick 1 x 10
×2
Arm Piece with Pin, 3 Fingers
Arm Piece with Pin, 3 Fingers
Minifigure, Utensil Compass with Fixed Trans-Clear Top and Black Disc with White and Yellow Lines Pattern
Minifigure, Utensil Compass with Fixed Trans-Clear Top and Black Disc with White and Yellow Lines Pattern
Magnet Cylindrical
Magnet Cylindrical
×3

Common questions about Shark's Crystal Cave

How much is LEGO Shark's Crystal Cave (6190-1) worth?

Shark's Crystal Cave sells for an average of $125.22 used and $321.88 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 6190-1?

This set includes 2 minifigures: Aquashark 1 with Black Flippers ($2.47), Aquashark 2 ($3.47). The minifigures have a combined BrickLink value of $5.94. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Shark's Crystal Cave?

The minifigures make up about 5% of the set value ($5.94 out of $125.22). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Shark's Crystal Cave (6190-1) retired?

Yes, Shark's Crystal Cave was released in 1996 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Shark's Crystal Cave set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All LEGO setsLEGO minifiguresMost valuable LEGO figsFree scanner