How much is LEGO Twin-Rotor Helicopter (31096-1) worth?

Twin-Rotor Helicopter sells for an average of $24.95 used and $70.62 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 31096-1?

This set includes 1 minifigure: Helicopter Pilot - Dark Blue Suit with Harness ($1.93). The minifigures have a combined BrickLink value of $1.93. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Twin-Rotor Helicopter?

The minifigures make up about 8% of the set value ($1.93 out of $24.95). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Twin-Rotor Helicopter (31096-1) retired?

Yes, Twin-Rotor Helicopter was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Twin-Rotor Helicopter set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Twin-Rotor Helicopter

31096-1·LEGO·2019·1 minifig·196 parts

Used Avg

$24.95

New Avg

$70.62

Add to your inventory Scan the minifigs

About Twin-Rotor Helicopter

Twin-Rotor Helicopter (31096-1) is a LEGO LEGO set released in 2019, currently averaging $24.95 used on BrickLink. It comes with 1 minifigure worth a combined $1.93. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 196 pieces.

Parts (196)

Plate 3 x 3

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×6

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 4 x 1 Inverted

×2

Slope, Curved 4 x 1 Inverted

×2

Tile, Round 2 x 2 with Hole

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Brick, Round 2 x 2 with Pin Holes

×3

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Minifigure, Utensil Goblet

Tile, Modified 1 x 2 Grille with Bottom Groove

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×4

Slope, Curved 3 x 2

×2

Slope, Curved 3 x 2

×2

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

×2

Minifigure, Visor Standard

Brick, Modified 1 x 2 with Pin

×2

Brick 1 x 16

×2

Antenna Whip 8H

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×3

Wedge, Plate 2 x 2 Cut Corner

×2

Wedge, Plate 2 x 2 Cut Corner

×2

Tile 2 x 3

×3

Technic, Pin with Short Friction Ridges

×13

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 3

×4

Brick 2 x 2

Brick 1 x 2

×3

Brick 1 x 2

Brick 1 x 1

×7

Brick 1 x 1

×2

Brick 1 x 6

×5

Brick 1 x 4

×4

Plate 2 x 4

×2

Plate 2 x 4

×7

Plate 2 x 4

×2

Plate 2 x 3

×6

Plate 2 x 3

×7

Plate 2 x 2

×4

Plate 1 x 2

×9

Plate 1 x 2

×3

Plate 1 x 2

×9

Plate 1 x 2

×3

Plate 1 x 2

×7

Plate 1 x 1

×3

Plate 1 x 1

×5

Plate 1 x 1

×2

Plate 1 x 1

×2

Plate 4 x 4

×3

Plate 4 x 6

×2

Plate 2 x 8

×4

Plate 2 x 8

×3

Plate 4 x 8

Plate 6 x 8

Bar 4L (Lightsaber Blade / Wand)

×3

Slope 45 2 x 2

×10

Hook with Tow Ball

Panel 1 x 4 x 1

×4

Brick, Modified 1 x 4 with Studs on Side

×2

Brick, Modified 1 x 4 with Studs on Side

×2

Plate, Modified 2 x 8 with Door Rail

×2

Tile 1 x 2

×2

Technic, Brick 1 x 2 with Holes

×2

String Reel 3 x 2 x 3 Drum with Axle Hole

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×4

Wedge, Plate 4 x 6 Cut Corners

×2

Technic, Axle 2L Notched

×8

Technic, Brick 1 x 2 with Axle Hole

×8

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×6

Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller)

×4

Technic, Axle 5.5L with Stop

Technic, Gear 20 Tooth Double Bevel

×2

Technic, Gear 12 Tooth Double Bevel

×2

Technic, Liftarm Thick 1 x 3

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

Technic, Brick 4 x 6 Open Center

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Wheel 8mm D. x 6mm with Slot

×7

Plate 1 x 8

Brick 1 x 3

×2

Brick 1 x 3

×2

Plate 1 x 3

×2

Plate 1 x 3

×2

Plate 1 x 3

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Slope, Inverted 45 2 x 1

×4

Plate 1 x 6

×4

Plate 1 x 6

×3

Plate 1 x 6

×3

Technic, Pin without Friction Ridges

×2

Technic, Brick 1 x 2 with Hole

×3

Technic, Brick 1 x 2 with Hole

×5

Technic, Brick 1 x 2 with Hole

×4

Technic, Axle 6L

×2

Technic, Axle 12L

×2

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×3

Plate 1 x 4

×10

Plate 1 x 4

×3

Plate 2 x 6

×2

Plate 2 x 6

×3

Plate 2 x 10

Technic, Brick 1 x 12 with Holes

×2

Brick, Round 2 x 2 with Axle Hole

Plate 6 x 6

×3

Plate, Round 2 x 2 with Axle Hole

Minifigure, Utensil Seat / Chair 2 x 2

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Plate 8 x 8

Tile 1 x 8

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Wedge 6 x 2 Right

×2

Wedge 6 x 2 Left

×2

Wedge, Plate 4 x 2 Right

×3

Wedge, Plate 4 x 2 Left

×3

Slope, Curved 6 x 1 with 2 Studs

×2

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×5

Plate 2 x 16

×2

Technic, Axle 1L with Pin with Friction Ridges

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

×6

Wedge, Plate 3 x 2 Left

Tap 1 x 1 without Hole in Nozzle End

×3

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Right

Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins

×3

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Vehicle, Air Scoop Engine Top 2 x 2

×2

Slope 30 1 x 1 x 2/3

×9

Slope 30 1 x 1 x 2/3

×3

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Brick, Round 2 x 2 Dome Top

Tire 14mm D. x 4mm Smooth Small Single with Number Embossed on Side

×6

Propeller 3 Blade 3 Diameter with Axle Hole

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×4

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×6

Brick 1 x 12

Slope 18 2 x 1 x 2/3 with Grille

×8

Slope, Curved 4 x 1

×4

Slope, Curved 4 x 1

×2

Technic, Universal Joint 3L

×2

Windscreen 5 x 8 x 2

Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)

×6

Tile 1 x 3

×6

Bar 6L with Stop Ring

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Gearbox 4 x 4 x 1 2/3

×3

Technic, Axle 3L with Stud

×2

Technic, Gear 12 Tooth Bevel

×6

Tile 1 x 6

×2

Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder

Plate, Round 1 x 1 with Open Stud

×5

Slope 30 1 x 2 x 2/3

×6

Slope 30 1 x 2 x 2/3 with 2 Gauges and Silver Outline Pattern

Technic, Axle 4L with Stop

×2

Brick, Modified 1 x 1 with Stud on Side

×4

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×6

Brick, Round Corner 3 x 3 x 2 Dome Top

×2

Plate 2 x 14

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×4

Slope, Curved 4 x 1 x 2/3 Double

×8

Bracket 1 x 2 - 2 x 4

×2

Slope, Curved 4 x 2

×2

Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand

×3

Brick and Axle Separator

Tile, Round 1 x 1

×15

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Technic, Axle 4L with Center Stop

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2

String, Cord Thin 100cm

Twin-Rotor Helicopter

About Twin-Rotor Helicopter

Part-out value

Seller notes

Minifigures in Twin-Rotor Helicopter (1)

Parts (196)

Common questions about Twin-Rotor Helicopter

How much is LEGO Twin-Rotor Helicopter (31096-1) worth?

What minifigures come in LEGO set 31096-1?

Is it worth parting out LEGO Twin-Rotor Helicopter?

Is LEGO Twin-Rotor Helicopter (31096-1) retired?

How do I check if my Twin-Rotor Helicopter set is complete?

More LEGO sets

Explore more

Company

Legal