Support 2 x 2 x 7 Lamp Post, 4 Base Flutes
Brick, Modified 1 x 2 with Studs on 1 Side
×3Plate, Modified 1 x 2 with Pin Hole on Top
×4Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
×3Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
×2Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
×2Slope, Curved 2 x 1 x 2/3
×2Cone 1 x 1 Inverted with Bar
Slope, Curved 4 x 1 Inverted
×2Minifigure, Utensil Musical Instrument, Saxophone
Panel 1 x 4 x 2 with Side Supports - Hollow Studs with Bright Pink, Coral, Dark Purple, and Yellow Poster of Minifigure with Trumpet, 'JAZZ! Concert', and 'every friday LIVE MUSIC' Pattern
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder
Tile, Round 2 x 2 with Bottom Stud Holder with Black Needle, Thread, 'EST 1932', 'TAILOR', and Medium Lavender Stitches Pattern
Tile, Round 2 x 2 with Bottom Stud Holder with Vinyl Record with Bright Light Orange and Magenta Center and Music Notes Pattern
Slope, Curved 2 x 2 x 2/3
Slope, Curved 2 x 2 x 2/3
×4Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside
Fence 1 x 4 x 2 Spindled with 4 Studs
Brick, Round 2 x 2 Dome Bottom
Technic, Axle 5L with Stop
×4Brick, Modified 1 x 4 with Masonry Profile
×4Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×4Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×2Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×6Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×2Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×7Plant Stem / Stalk with Bar, Bar Holder, and Hollow Stud
×3Tile, Modified 1 x 1 with Open O Clip
×2Tile, Modified 1 x 1 with Open O Clip
×2Plate, Round 1 x 2 Half with 1 Stud (Jumper)
×6Brick, Round 2 x 2 with Pin Holes
Vehicle, Mudguard 4 x 3 x 1 2/3 with Arch Round, Wide Cylinder
Technic, Liftarm Thick 1 x 1 (Spacer)
×2Tile, Round 2 x 2 with Open Stud
Tile, Round 2 x 2 with Open Stud
×3Tile, Round 2 x 2 with Open Stud
×2Tile, Round 2 x 2 with Open Stud
×6Tile, Round 2 x 2 with Open Stud
×4Minifigure, Utensil Scissors
×2Window 1 x 4 x 1 2/3 with Spoked Rounded Top
Tile, Round 1 x 1 with Bar and Small Pin Hole
×4Tile, Round 1 x 1 with Bar and Small Pin Hole
×14Tile, Round 1 x 1 with Bar and Small Pin Hole
×3Tile, Round 1 x 1 with Bar and Small Pin Hole
×3Tile, Round 1 x 1 with Bar and Small Pin Hole
×3Tile, Round 1 x 1 with Bar and Small Pin Hole
×4Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid
×3Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Arch 1 x 5 x 4 - Continuous Bow
×3Minifigure, Utensil Goblet
×2Panel 1 x 2 x 1 with Rounded Corners and 2 Sides
Tile, Modified 1 x 2 Grille with Bottom Groove
×2Tile, Modified 1 x 2 Grille with Bottom Groove
×4Tile, Modified 1 x 2 Grille with Bottom Groove
×3Tile, Modified 1 x 2 Grille with Bottom Groove
×2Tile, Modified 1 x 2 Grille with Bottom Groove
×2Tile, Modified 1 x 2 Grille with Bottom Groove
×2Slope, Curved 2 x 1 x 2/3 Inverted
Tile, Round 1 x 1 Half Circle Extended
×3Hinge Plate 1 x 4 Swivel (2429 / 2430)
×4Minifigure, Headgear Helmet Motorcycle (Standard)
Minifigure, Visor Standard
×2Wedge, Plate 3 x 3 Cut Corner
×3Wedge, Plate 3 x 3 Cut Corner
Brick, Modified Facet 3 x 3
×2Brick, Modified Facet 3 x 3
×4Plant Flower Stem with Bar Holder, Bar, and 3 Stems
×2Plate, Round 1 x 1 with Flower Edge (5 Petals)
×4Plate, Round 1 x 1 with Flower Edge (5 Petals)
×2Plate, Round 1 x 1 with Flower Edge (5 Petals)
×2Plate, Round 1 x 1 with Flower Edge (5 Petals)
×7Tile, Round 1 x 1 Quarter
×9Tile, Round 1 x 1 Quarter
×3Tile, Round 1 x 1 Quarter
×3Tile, Round 1 x 1 Quarter
×2Tile, Round 1 x 1 Quarter
×6Tile, Round 1 x 1 Quarter
×7Tile, Round 1 x 1 Quarter with Pizza Slice with Green Basil Leaves and White Mozzarella Cheese Pattern
×5Plate, Round 1 x 1 with Bar Handle
×4Plate, Round 1 x 1 with Bar Handle
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Wedge, Plate 2 x 2 Cut Corner
×3Tile, Modified Facet 2 x 2
Tile, Modified Facet 2 x 2
×4Tile, Modified Facet 2 x 2
×4Tile, Modified Facet 2 x 2
×2Technic, Pin with Short Friction Ridges
×5Tile, Round Corner 2 x 2 Macaroni
Tile, Round Corner 2 x 2 Macaroni
Slope 45 2 x 1 with Cutout without Stud
×3Container, Box 2 x 2 x 1 - Top Opening with Raised Inner Bottom
Vehicle, Mudguard 4 x 3 x 1 with Arch Curved
×3Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Brick, Modified 1 x 1 with Bar Handle
×2Bunny / Rabbit with Black Eyes with White Pupils, Bright Pink Nose Pattern
Minifigure, Utensil Handlebars
Window 1 x 2 x 2 2/3 with Rounded Top
×4Window 1 x 2 x 2 2/3 with Rounded Top
Pane for Window 1 x 2 x 2 2/3 Lattice Diamond with Rounded Top
×5Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
×4Brick, Modified 1 x 2 with Bar Handle on Side
×2Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)
×2Bar 4L (Lightsaber Blade / Wand)
×4Brick, Modified 1 x 4 with Studs on Side
Wedge, Plate 4 x 4 Cut Corner
×2Vehicle, Steering Wheel Small, 2 Studs Diameter
Tile 2 x 2 with Red and Green Stripes and Dark Green 'PIZZA' Pattern (Pizza Box)
Tile 2 x 2 with Sheet Music, Black Treble Clef and Music Notes on Gold Lines / Staves Pattern
Tile 1 x 2 with 'TICKET' and '0937' Pattern
Technic, Brick 1 x 2 with Holes
×2Plate, Modified 1 x 2 with Door Rail
×4Plate, Modified 1 x 2 with Door Rail
×8Technic, Brick 1 x 2 with Axle Hole
×2Plant Flower with Bar and Small Pin Hole
×3Plant Flower with Bar and Small Pin Hole
×2Plant Plate, Round 1 x 1 with 3 Layered Leaves
×2Plant Plate, Round 1 x 1 with 3 Layered Leaves
×2Plant Plate, Round 1 x 1 with 3 Layered Leaves
×6Plant Plate, Round 1 x 1 with 3 Layered Leaves
×10Bar 1L with 1 x 1 Round Plate with Hollow Stud
×5Bar 1L with 1 x 1 Round Plate with Hollow Stud
×2Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×2Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×4Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
×18Plant Stem with Bar (Carrot Top / Twig)
×4Tile, Modified 2 x 2 with Studs on Edge
×6Tile, Modified 2 x 2 with Studs on Edge
×2Tile, Modified 2 x 2 with Studs on Edge
×2Tile, Modified 2 x 2 with Studs on Edge
×5Tile, Modified 2 x 2 with Studs on Edge
×11Tile, Modified 2 x 2 with Studs on Edge
×4Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
×5Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
×6Plate, Modified 4 x 4 with 3 x 3 Curved Cutout
Plate, Round 1 x 2 with Open Studs
×6Plate, Round 1 x 2 with Open Studs
×3Tile, Modified 2 x 2 Triangular
Tile, Modified 2 x 2 Triangular
Tile, Modified 2 x 2 Triangular
×2Tile, Modified 2 x 2 Triangular
Minifigure, Head (Plain)
Fence 1 x 4 x 1 Lattice
×4Slope, Inverted 45 2 x 1
×6Slope, Inverted 45 2 x 1
×4Minifigure, Utensil Wand, 2 on Sprue
Turntable 2 x 2 Plate, Top
Turntable 2 x 2 Plate, Base
Bracket 1 x 1 - 1 x 1 Inverted
×2Technic, Brick 1 x 2 with Hole
×5Slope, Curved 1 x 2 with Bottom Stud Holder
Slope, Curved 1 x 2 with Bottom Stud Holder
×4Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Plant Stem with Bar, 3 Leaves, and Small Pin Hole
×2Plant Stem with Bar, 3 Leaves, and Small Pin Hole
×3Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
×8Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
×6Minifigure, Utensil Hairbrush - 10mm Handle
Arch 1 1/2 x 1 1/2 Corner
×6Minifigure, Headgear Hat, Top Hat
Support 2 x 2 x 2 Stand with Complete Hole
Dish 4 x 4 Inverted (Radar) with Solid Stud with Dark Green, Red, and Bright Light Yellow Stripes Pattern
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×9Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
×2Brick, Modified 1 x 1 with Headlight
×24Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×6Brick, Modified 1 x 1 with Headlight
×4Minifigure, Utensil Seat / Chair 2 x 2
×3Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
×6Bar 1 x 4 x 2 with Open Studs
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×4Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×2Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×2Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×2Bracket 2 x 2 - 1 x 2 Centered
×2Bracket 2 x 2 - 1 x 2 Centered
×4Plate, Modified 1 x 4 with 2 Studs with Groove
×3Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
×10Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
Brick, Modified 1 x 2 with Channel
×14Brick, Modified 1 x 2 with Channel
×3Wedge, Plate 3 x 2 Left
×3Support 1 x 1 x 6 Solid Pillar
×6Plate, Modified 1 x 2 with Open O Clip on Top
×2Plate, Modified 1 x 2 with Open O Clip on Top
Plate, Modified 1 x 2 with Open O Clip on Top
×2Plate, Modified 1 x 8 with Door Rail
Brick, Round 1 x 1 with Fins
×2Cone 1 x 1 with Top Groove
×2Cone 1 x 1 with Top Groove
×8Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
×4Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Tap 1 x 1 without Hole in Nozzle End
×3Pneumatic T Piece Second Version (T Bar with Ball in Center)
×2Pneumatic T Piece Second Version (T Bar with Ball in Center)
×2Brick, Modified 1 x 1 with Studs on 4 Sides
Brick, Modified 1 x 1 with Studs on 4 Sides
×3Bar 1 x 3 with Clip and Stud Holder (Robot Arm)
×2Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
×2Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×2Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
×3Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×10Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×3Slope, Curved 1 x 1 x 2/3 Double
Slope, Curved 1 x 1 x 2/3 Double
×4Brick, Modified 1 x 2 with Studs on 2 Sides
×2Window 1 x 4 x 6 with 3 Panes
×4Glass for Window 1 x 4 x 6
×4Bar 7 x 3 with 2 U Clips (Ladder)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
×2Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
×2Window 1 x 2 x 2 Flat Front
×2Window 1 x 2 x 2 Flat Front
×19Window 1 x 2 x 3 Flat Front
×8Window 1 x 2 x 3 Flat Front
×8Window 1 x 4 x 3 - No Shutter Tabs
Window 1 x 4 x 3 - No Shutter Tabs
×6Window 1 x 4 x 3 - No Shutter Tabs
×2Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
×9Glass for Window 1 x 2 x 2 Flat Front
×21Glass for Window 1 x 2 x 3 Flat Front
×16Glass for Window 1 x 4 x 3 - Opening
×6Pane for Window 1 x 2 x 3 Lattice with Thick Corner Tabs
×2Door 1 x 4 x 6 with Stud Handle
×2Door 1 x 4 x 6 with Stud Handle
×6Door 1 x 4 x 6 with Stud Handle
×2Minifigure, Utensil Hose Nozzle Elaborate
×2Minifigure, Utensil Hose Nozzle Elaborate
×4Wedge, Plate 6 x 6 Cut Corner
Hinge Brick 2 x 2 Top Plate
×2Slope 18 2 x 1 x 2/3 with Grille
×2Turntable 4 x 4 Square Base, Locking
×2Door, Frame 1 x 4 x 4 Lift
Bar 1 x 3 with 2 Stud Receptacles (Radio Handle / Telephone Handset)
Bar 1 x 4 x 3 Grille with End Protrusions
×2Windscreen 3 x 6 x 1 Curved
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
×6Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Minifigure, Utensil Telescope
×2Minifigure, Utensil Telescope
Minifigure, Utensil Telescope
×12Technic, Brick 1 x 1 with Hole
×4Technic, Brick 1 x 1 with Hole
×2Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
×2Plate, Modified 2 x 4 with 2 Studs (Double Jumper)
Plate, Modified 2 x 4 with 2 Studs (Double Jumper)
×2Bar 1L with Angled Hollow Stud
×2Bar 1L with Angled Hollow Stud
×2Technic, Pin 3L with Friction Ridges
Wheel Small with Stub Axles with Molded Black Hard Rubber Tire Pattern
×2Technic, Axle 3L with Stud
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends
Tile 2 x 6 with Orange 'JAZZ' with Red and White Outlines Pattern
Tile 2 x 6 with Orange 'CLUB' with Red and White Outlines Pattern
Tile 2 x 6 with White Marquee Sign with Black 'LIVE MUSIC ALL NIGHT and magic show' and Bright Light Yellow Circles Pattern
×2Technic, Brick 1 x 1 with Axle Hole
Bracket 1 x 1 - 1 x 2 Inverted
×2Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
×4Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube
×6Plate, Round Corner 2 x 2 with 1 x 1 Cutout
×2Plate, Modified 1 x 3 with 2 Open O Clips on Top
×2Minifigure, Utensil Musical Instrument, Double Bass with Black Neck, Tailpiece, and F Holes and Silver Strings Pattern
Squirrel with Reddish Brown Nose and Black Eyes with White Pupils Pattern
Plate, Round 1 x 1 with Open Stud
×5Plate, Round 1 x 1 with Open Stud
×2Plate, Round 1 x 1 with Open Stud
×2Plate, Round 1 x 1 with Open Stud
×4Cone 1 1/6 x 1 1/6 x 2/3 (Fez)
×4Cone 1 1/6 x 1 1/6 x 2/3 (Fez)
×2Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
×5Brick, Round 4 x 4 with Hole
Brick, Modified 1 x 1 with Stud on Side
×2Brick, Modified 1 x 1 with Stud on Side
×3Brick, Modified 1 x 1 with Stud on Side
×4Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×4Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×2Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×32Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
×2Minifigure, Utensil Oar / Paddle Reinforced
Bar 5L with Handle (Friction Ram)
×2Bar 3L (Bar Arrow)
×2Bar 3L (Bar Arrow)
×2Bar 3L (Bar Arrow)
×2Bar 3L (Bar Arrow)
×2Bar 3L (Bar Arrow)
×2Technic, Pin 1/2 with Friction Ridges
×6Technic, Panel Curved 2 x 1 x 1
×2Minifigure, Utensil Microphone
×2Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Arm Skeleton, Bent with Clips (Horizontal Grip)
×2Minifigure, Utensil Bottle
Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand
×2Brick, Modified 1 x 2 with Masonry Profile
×26Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side
×6Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side
Bracket 1 x 2 - 2 x 2 Inverted
×2Bracket 1 x 2 - 2 x 2 Inverted
×17Bracket 1 x 2 - 2 x 2 Inverted
×10Minifigure, Utensil Ingot 1 x 2
×2Bracket 1 x 2 - 1 x 2 Inverted
×2Bracket 1 x 2 - 1 x 2 Inverted
×5Bracket 1 x 2 - 1 x 2 Inverted
×2Bracket 1 x 2 - 1 x 2 Inverted
×2