brick'em
Custom Car Garage

Custom Car Garage

10200-1·LEGO·2008·4 minifigs·228 parts

Used Avg
$86.76
New Avg
$125.26
Add to your inventoryScan the minifigs

About Custom Car Garage

Custom Car Garage (10200-1) is a LEGO LEGO set released in 2008, currently averaging $86.76 used on BrickLink. It comes with 4 minifigures worth a combined $7.56. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 228 pieces.

Part-out value

The minifigures make up only 9% of this set's value ($7.56 out of $86.76). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Seller notes

  • This is a vintage set (2008). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Custom Car Garage (4)

Hot Rod Mechanic - Blue Overalls, Blue Cap, Stubble
Hot Rod Mechanic - Blue Overalls, Blue Cap, Stubble
rac038$1.29
Hot Rod Driver Orange
Hot Rod Driver Orange
rac039$1.32
Hot Rod Driver Tan
Hot Rod Driver Tan
rac040$3.55
Plaid Button Shirt, Dark Bluish Gray Legs, Black Helmet with Medium Blue Trident (Hot Rod Driver)
Plaid Button Shirt, Dark Bluish Gray Legs, Black Helmet with Medium Blue Trident (Hot Rod Driver)
rac041$1.40

Parts (228)

Sticker Sheet for Set 10200 - (84642/4540721)
Sticker Sheet for Set 10200 - (84642/4540721)
Flag 2 x 2 Square with Checkered Pattern on Both Sides, Black Corners (Printed)
Flag 2 x 2 Square with Checkered Pattern on Both Sides, Black Corners (Printed)
Minifigure, Utensil Goblet
Minifigure, Utensil Goblet
×2
Brick 2 x 2 Corner
Brick 2 x 2 Corner
×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×6
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
×3
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×8
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
×6
Tile 1 x 4
Tile 1 x 4
×8
Tile 1 x 4
Tile 1 x 4
×7
Tile 1 x 4
Tile 1 x 4
×2
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
×2
Plate, Modified 2 x 2 with Pin Hole
Plate, Modified 2 x 2 with Pin Hole
×2
Plate 2 x 12
Plate 2 x 12
×4
Brick 1 x 1 x 5 - Hollow Stud
Brick 1 x 1 x 5 - Hollow Stud
×5
Brick 1 x 2 x 5
Brick 1 x 2 x 5
Brick 1 x 2 x 5
Brick 1 x 2 x 5
×4
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×4
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
×2
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
×2
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
×12
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
×6
Plate, Modified 1 x 4 with Wheels Holder
Plate, Modified 1 x 4 with Wheels Holder
×3
Brick 2 x 4
Brick 2 x 4
Brick 2 x 4
Brick 2 x 4
×4
Brick 2 x 4
Brick 2 x 4
Brick 2 x 3
Brick 2 x 3
Brick 2 x 3
Brick 2 x 3
×2
Brick 2 x 2
Brick 2 x 2
Brick 1 x 2
Brick 1 x 2
×9
Brick 1 x 2
Brick 1 x 2
×2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 2
Brick 1 x 1
Brick 1 x 1
×17
Brick 1 x 1
Brick 1 x 1
×12
Brick 1 x 1
Brick 1 x 1
×6
Brick 1 x 1
Brick 1 x 1
Brick 1 x 8
Brick 1 x 8
×7
Brick 1 x 8
Brick 1 x 8
×3
Brick 1 x 6
Brick 1 x 6
×3
Brick 1 x 6
Brick 1 x 6
×2
Brick 1 x 6
Brick 1 x 6
×2
Brick 1 x 4
Brick 1 x 4
×4
Brick 1 x 4
Brick 1 x 4
×6
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
Brick 1 x 4
Plate, Modified 2 x 4 with Pins and Thin Angled Supports
Plate, Modified 2 x 4 with Pins and Thin Angled Supports
Minifigure, Utensil Tool Circular Blade Saw
Minifigure, Utensil Tool Circular Blade Saw
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 4
Plate 2 x 4
×3
Plate 2 x 4
Plate 2 x 4
×2
Plate 2 x 4
Plate 2 x 4
×7
Plate 2 x 3
Plate 2 x 3
×3
Plate 2 x 3
Plate 2 x 3
×4
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
Plate 2 x 3
×4
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
×2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
Plate 2 x 2
×6
Plate 2 x 2
Plate 2 x 2
×3
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×5
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 2
Plate 1 x 2
×4
Plate 1 x 2
Plate 1 x 2
×12
Plate 1 x 2
Plate 1 x 2
×8
Plate 1 x 2
Plate 1 x 2
×2
Plate 1 x 1
Plate 1 x 1
Plate 1 x 1
Plate 1 x 1
×2
Plate 1 x 1
Plate 1 x 1
×4
Plate 1 x 1
Plate 1 x 1
Plate 1 x 1
Plate 1 x 1
×4
Plate 1 x 1
Plate 1 x 1
×12
Plate 1 x 1
Plate 1 x 1
×8
Plate 6 x 16
Plate 6 x 16
×7
Plate 4 x 12
Plate 4 x 12
Plate 4 x 10
Plate 4 x 10
Plate 4 x 4
Plate 4 x 4
Plate 4 x 4
Plate 4 x 4
Plate 4 x 6
Plate 4 x 6
×3
Plate 4 x 6
Plate 4 x 6
Plate 6 x 10
Plate 6 x 10
Plate 4 x 8
Plate 4 x 8
×2
Plate 6 x 8
Plate 6 x 8
×2
Plate 6 x 8
Plate 6 x 8
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
×5
Slope 45 2 x 2
Slope 45 2 x 2
×2
Slope 45 2 x 2 with Radar and Disk Slot Pattern
Slope 45 2 x 2 with Radar and Disk Slot Pattern
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
Brick, Modified 1 x 4 with Studs on Side
×2
Brick, Round  1 x 1
Brick, Round 1 x 1
×6
Tire 24 x 14 Shallow Tread
Tire 24 x 14 Shallow Tread
×6
Brick 1 x 2 without Bottom Tube
Brick 1 x 2 without Bottom Tube
×5
Vehicle, Steering Wheel Small, 2 Studs Diameter
Vehicle, Steering Wheel Small, 2 Studs Diameter
Tile 2 x 2
Tile 2 x 2
×2
Tile 2 x 2
Tile 2 x 2
×2
Tile 2 x 2
Tile 2 x 2
×2
Tile 2 x 2
Tile 2 x 2
×3
Tile 2 x 2
Tile 2 x 2
×3
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2
×4
Tile 1 x 2
Tile 1 x 2
×3
Tile 1 x 2
Tile 1 x 2
Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern
Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern
Tile 1 x 1
Tile 1 x 1
×3
Tile 1 x 1
Tile 1 x 1
×3
Tile 1 x 1
Tile 1 x 1
×5
Tile 1 x 1
Tile 1 x 1
×12
Plate, Modified 2 x 3 with Hole
Plate, Modified 2 x 3 with Hole
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
×5
Technic, Pin 3/4
Technic, Pin 3/4
×3
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
×3
Technic, Axle  2L Notched
Technic, Axle 2L Notched
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
×2
Plate 1 x 8
Plate 1 x 8
×3
Plate 1 x 8
Plate 1 x 8
×3
Brick 1 x 3
Brick 1 x 3
×4
Brick 1 x 3
Brick 1 x 3
Plate 1 x 3
Plate 1 x 3
Plate 1 x 3
Plate 1 x 3
×4
Plate 1 x 3
Plate 1 x 3
×11
Plate 1 x 3
Plate 1 x 3
×8
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 1
Plate 1 x 6
Plate 1 x 6
×6
Plate 1 x 6
Plate 1 x 6
×3
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
×5
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
×4
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
×2
Technic, Axle  4L
Technic, Axle 4L
Technic, Axle  8L
Technic, Axle 8L
Plate 1 x 4
Plate 1 x 4
×3
Plate 1 x 4
Plate 1 x 4
×2
Plate 1 x 4
Plate 1 x 4
×5
Plate 1 x 4
Plate 1 x 4
×3
Plate 1 x 4
Plate 1 x 4
×8
Plate 1 x 4
Plate 1 x 4
×5
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×6
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×13
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×17
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
×12
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×4
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×3
Plate 2 x 6
Plate 2 x 6
×2
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
×2
Plate 2 x 10
Plate 2 x 10
×3
Plate 2 x 10
Plate 2 x 10
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
×6
Minifigure, Utensil Cup
Minifigure, Utensil Cup
×3
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
×2
Hinge Brick 1 x 2 Top Plate
Hinge Brick 1 x 2 Top Plate
×2
Plate 6 x 6
Plate 6 x 6
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×6
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×4
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×7
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×17
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 1 with Headlight
×10
Plate, Round 1 x 1
Plate, Round 1 x 1
×4
Plate, Round 1 x 1
Plate, Round 1 x 1
×7
Plate, Round 1 x 1
Plate, Round 1 x 1
×5
Plate, Round 1 x 1
Plate, Round 1 x 1
×28
Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
×4
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
×4
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
×4
Tile, Round 2 x 2
Tile, Round 2 x 2
Tile, Round 2 x 2 with Fine Mesh Grille Manhole Cover Pattern
Tile, Round 2 x 2 with Fine Mesh Grille Manhole Cover Pattern
Tile 1 x 8
Tile 1 x 8
×6
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Panel 1 x 4 x 3 - Hollow Studs
Panel 1 x 4 x 3 - Hollow Studs
×6
Minifigure Neck Bracket with Back Stud - Thin Back Wall
Minifigure Neck Bracket with Back Stud - Thin Back Wall
×4
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
×3
Plate 2 x 16
Plate 2 x 16
×7
Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
×2
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Right
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Left
Plate 1 x 10
Plate 1 x 10
Plate 1 x 10
Plate 1 x 10
×3
Factory Digital Designer CD-ROM for 10200
Factory Digital Designer CD-ROM for 10200
Tap 1 x 1 with Hole in Nozzle End
Tap 1 x 1 with Hole in Nozzle End
×11
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
×5
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
×6
Panel 1 x 2 x 2 - Hollow Studs
Panel 1 x 2 x 2 - Hollow Studs
×4
Panel 1 x 2 x 2 - Hollow Studs
Panel 1 x 2 x 2 - Hollow Studs
×4
Panel 1 x 2 x 1
Panel 1 x 2 x 1
×3
Windscreen 3 x 4 x 4 Inverted
Windscreen 3 x 4 x 4 Inverted
Bar   1L with Clip Mechanical Claw (Undetermined Type)
Bar 1L with Clip Mechanical Claw (Undetermined Type)
×2
Vehicle, Air Scoop Engine Top 2 x 2
Vehicle, Air Scoop Engine Top 2 x 2
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×4
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×5
Slope, Curved 3 x 1
Slope, Curved 3 x 1
×2
Arm Mechanical, Exo-Force / Bionicle, Thin Support
Arm Mechanical, Exo-Force / Bionicle, Thin Support
×8
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×20
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
×3
Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes
Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes
×6
Panel 1 x 6 x 5
Panel 1 x 6 x 5
×8
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin
×6
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
×6
Tire 21mm D. x 12mm - Offset Tread Small Wide, Raised Groove
Tire 21mm D. x 12mm - Offset Tread Small Wide, Raised Groove
×6
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×6
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×4
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×16
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×6
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
×10
Hinge Brick 2 x 2 Top Plate
Hinge Brick 2 x 2 Top Plate
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 6 with Studs on Edges
Tile, Modified 4 x 6 with Studs on Edges
Brick, Modified 2 x 4 with Pins
Brick, Modified 2 x 4 with Pins
Technic, Liftarm Thin 1 x 3 - Axle Holes
Technic, Liftarm Thin 1 x 3 - Axle Holes
×3
Tile 1 x 6
Tile 1 x 6
×2
Tile 1 x 6
Tile 1 x 6
×8
Tile 1 x 6
Tile 1 x 6
×2

Common questions about Custom Car Garage

How much is LEGO Custom Car Garage (10200-1) worth?

Custom Car Garage sells for an average of $86.76 used and $125.26 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 10200-1?

This set includes 4 minifigures: Hot Rod Mechanic - Blue Overalls, Blue Cap, Stubble ($1.29), Hot Rod Driver Orange ($1.32), Hot Rod Driver Tan ($3.55), Plaid Button Shirt, Dark Bluish Gray Legs, Black Helmet with Medium Blue Trident (Hot Rod Driver) ($1.40). The minifigures have a combined BrickLink value of $7.56. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Custom Car Garage?

The minifigures make up about 9% of the set value ($7.56 out of $86.76). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Custom Car Garage (10200-1) retired?

Yes, Custom Car Garage was released in 2008 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Custom Car Garage set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All LEGO setsLEGO minifiguresMost valuable LEGO figsFree scanner